XR is a proprietary feature of the chipset. It's not supported and
should not be supported.
Signed-off-by: Pavel Roskin <proski@xxxxxxx>
Tested-by: Sedat Dilek <sedat.dilek@xxxxxxxxx>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 4 ----
drivers/net/wireless/ath/ath5k/eeprom.c | 1 -
drivers/net/wireless/ath/ath5k/phy.c | 2 --
drivers/net/wireless/ath/ath5k/qcu.c | 7 -------
drivers/net/wireless/ath/ath5k/reset.c | 8 --------
5 files changed, 0 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index be7b8c0..a8a7db4 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -416,7 +416,6 @@ enum ath5k_driver_mode {
AR5K_MODE_11A = 0,
AR5K_MODE_11B = 1,
AR5K_MODE_11G = 2,
- AR5K_MODE_XR = 0,
AR5K_MODE_MAX = 3
};
@@ -694,12 +693,10 @@ struct ath5k_gain {
#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */
#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */
#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */
-#define CHANNEL_XR 0x0800 /* XR channel */
#define CHANNEL_A (CHANNEL_5GHZ | CHANNEL_OFDM)
#define CHANNEL_B (CHANNEL_2GHZ | CHANNEL_CCK)
#define CHANNEL_G (CHANNEL_2GHZ | CHANNEL_OFDM)
-#define CHANNEL_X (CHANNEL_5GHZ | CHANNEL_OFDM | CHANNEL_XR)
#define CHANNEL_ALL (CHANNEL_OFDM | CHANNEL_CCK | \
CHANNEL_2GHZ | CHANNEL_5GHZ)
@@ -710,7 +707,6 @@ struct ath5k_gain {
* Used internally for ath5k_hw_reset_tx_queue().
* Also see struct struct ieee80211_channel.
*/
-#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0)
#define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0)
/*
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 9068b91..56cb9d4 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1782,7 +1782,6 @@ ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
{
switch (channel->hw_value & CHANNEL_MODES) {
case CHANNEL_A:
- case CHANNEL_XR:
return AR5K_EEPROM_MODE_11A;
case CHANNEL_G:
return AR5K_EEPROM_MODE_11G;
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 81e465e..b9ada88 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -2408,8 +2408,6 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
case CHANNEL_B:
ctl_mode |= AR5K_CTL_11B;
break;
- case CHANNEL_XR:
- /* Fall through */
default:
return;
}
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 65f1039..1d37675 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -185,13 +185,6 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
case AR5K_TX_QUEUE_CAB:
queue = AR5K_TX_QUEUE_ID_CAB;
break;
- case AR5K_TX_QUEUE_XR_DATA:
- if (ah->ah_version != AR5K_AR5212)
- ATH5K_ERR(ah,
- "XR data queues only supported in"
- " 5212!\n");
- queue = AR5K_TX_QUEUE_ID_XR_DATA;
- break;
default:
return -EINVAL;
}
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 0686c5d..5d6d3bd 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1108,14 +1108,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
mode = AR5K_MODE_11B;
break;
- case CHANNEL_XR:
- if (ah->ah_version == AR5K_AR5211) {
- ATH5K_ERR(ah,
- "XR mode not available on 5211");
- return -EINVAL;
- }
- mode = AR5K_MODE_XR;
- break;
default:
ATH5K_ERR(ah,
"invalid channel: %d\n", channel->center_freq);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
