Hello Helmut,
I applied your patch to compat-wireless-2011-07-18 on an Intel Core i5
CPU M460 2.53 GHz (quad core) with kernel
kernel-desktop-3.0.rc7-1.1.x86_64 from OpenSuSE and tested with Linksys
WUSB600N v2 (it's a rt3572 chip) on 40MHz / 802.11n . I just run it a
few days ago with the same compat-wireless package and it was totally
unusable.
With your patch, it's surprisingly running now - ok, the performance is
not as good as with rt3572sta and it isn't stable under high load (you
know - netperf and so ...). It just stalls after a few minutes. There
are at this moment no entries in messages. But before, I get an entry:
Jul 21 16:59:42 pc2 kernel: [20443.730419] phy0 ->
rt2x00usb_watchdog_tx_status: Warning - TX queue 2 status timed out,
invoke forced tx handler
The ping-latency is great - about 0.5 ms (rt3572sta: about 0.7 ms). The
performance with netperf is:
rt3572sta rt2800usb
supplicant -> hostapd 6.3 M/s 4 M/s
hostapd -> supplicant 7.7 M/s 5.7 M/s
If you could increase the stability under load and if you could increase
the performance a bit more, it would be great!
Some device information from messages:
Jul 21 16:58:20 pc2 kernel: [20361.966847] usb 2-1.1: new high speed USB
device number 8 using ehci_hcd
Jul 21 16:58:20 pc2 kernel: [20362.084522] usb 2-1.1: New USB device
found, idVendor=1737, idProduct=0079
Jul 21 16:58:20 pc2 kernel: [20362.084529] usb 2-1.1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Jul 21 16:58:20 pc2 kernel: [20362.084534] usb 2-1.1: Product: Linksys
WUSB600N Wireless-N USB Network Adapter with Dual-Band ver. 2
Jul 21 16:58:20 pc2 kernel: [20362.084538] usb 2-1.1: Manufacturer: Linksys
Jul 21 16:58:20 pc2 mtp-probe: checking bus 2, device 8:
"/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1"
Jul 21 16:58:20 pc2 mtp-probe: bus: 2, device: 8 was not an MTP device
Jul 21 16:58:20 pc2 kernel: [20362.161618] cfg80211: Calling CRDA to
update world regulatory domain
Jul 21 16:58:20 pc2 kernel: [20362.169831] cfg80211: World regulatory
domain updated:
Jul 21 16:58:20 pc2 kernel: [20362.169839] cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 21 16:58:20 pc2 kernel: [20362.169841] cfg80211: (2402000 KHz -
2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.169843] cfg80211: (2457000 KHz -
2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.169845] cfg80211: (2474000 KHz -
2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.169847] cfg80211: (5170000 KHz -
5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.169848] cfg80211: (5735000 KHz -
5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.169873] cfg80211: Calling CRDA for
country: DE
Jul 21 16:58:20 pc2 kernel: [20362.176622] cfg80211: Regulatory domain
changed to country: DE
Jul 21 16:58:20 pc2 kernel: [20362.176626] cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 21 16:58:20 pc2 kernel: [20362.176629] cfg80211: (2400000 KHz -
2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.176631] cfg80211: (5150000 KHz -
5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.176633] cfg80211: (5470000 KHz -
5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Jul 21 16:58:20 pc2 kernel: [20362.259525] usb 2-1.1: reset high speed
USB device number 8 using ehci_hcd
Jul 21 16:58:20 pc2 kernel: [20362.372816] phy0 -> rt2x00_set_chip: Info
- Chipset detected - rt: 3572, rf: 0009, rev: 0221.
Jul 21 16:58:20 pc2 kernel: [20362.373070] ieee80211 phy0: Selected rate
control algorithm 'minstrel_ht'
Jul 21 16:58:20 pc2 kernel: [20362.374341] Registered led device:
rt2800usb-phy0::radio
Jul 21 16:58:20 pc2 kernel: [20362.374430] Registered led device:
rt2800usb-phy0::assoc
Jul 21 16:58:20 pc2 kernel: [20362.374470] Registered led device:
rt2800usb-phy0::quality
Jul 21 16:58:20 pc2 kernel: [20362.374850] usbcore: registered new
interface driver rt2800usb
Jul 21 16:58:20 pc2 kernel: [20362.395110] udev[7976]: renamed network
interface wlan0 to wlan1
Jul 21 16:58:35 pc2 kernel: [20376.646437] phy0 ->
rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'.
Jul 21 16:58:35 pc2 kernel: [20376.649110] phy0 ->
rt2x00lib_request_firmware: Info - Firmware detected - version: 0.236.
Jul 21 16:58:35 pc2 kernel: [20376.868997] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
Jul 21 16:58:35 pc2 kernel: [20376.870375] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
Jul 21 16:58:35 pc2 kernel: [20376.871619] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
Jul 21 16:58:35 pc2 kernel: [20376.872867] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
Jul 21 16:58:35 pc2 kernel: [20376.874723] ADDRCONF(NETDEV_UP): wlan1:
link is not ready
Jul 21 16:58:38 pc2 kernel: [20380.335178] wlan1: authenticate with
68:7f:74:fb:39:ee (try 1)
Jul 21 16:58:38 pc2 kernel: [20380.336708] wlan1: authenticated
Jul 21 16:58:38 pc2 kernel: [20380.351817] wlan1: associate with
68:7f:74:fb:39:ee (try 1)
Jul 21 16:58:38 pc2 kernel: [20380.354946] wlan1: RX AssocResp from
68:7f:74:fb:39:ee (capab=0x411 status=0 aid=1)
Jul 21 16:58:38 pc2 kernel: [20380.354953] wlan1: associated
Jul 21 16:58:38 pc2 kernel: [20380.355048] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
Jul 21 16:58:38 pc2 kernel: [20380.356823] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
Jul 21 16:58:38 pc2 kernel: [20380.358414] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 93.
Jul 21 16:58:38 pc2 kernel: [20380.359820] phy0 -> rt2x00mac_conf_tx:
Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 46.
Jul 21 16:58:38 pc2 kernel: [20380.385902] ADDRCONF(NETDEV_CHANGE):
wlan1: link becomes ready
Jul 21 16:58:38 pc2 kernel: [20380.385970] cfg80211: Calling CRDA for
country: DE
Jul 21 16:58:38 pc2 kernel: [20380.390979] cfg80211: Regulatory domain
changed to country: DE
Jul 21 16:58:38 pc2 kernel: [20380.390983] cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 21 16:58:38 pc2 kernel: [20380.390988] cfg80211: (2400000 KHz -
2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 21 16:58:38 pc2 kernel: [20380.390993] cfg80211: (5150000 KHz -
5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 21 16:58:38 pc2 kernel: [20380.390996] cfg80211: (5470000 KHz -
5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
wlan1 IEEE 802.11abgn ESSID:"Hurra"
Mode:Managed Frequency:2.412 GHz Access Point: 11:22:33:44:55:66
Bit Rate=130 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=47/70 Signal level=-63 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:79 Missed beacon:0
Kind regards,
Andreas
PS
before this patch, I got millions of entries in messages like this,
absolutely no performance (about 1 k/s or nothing):
Jul 20 17:51:18 pc2 kernel: [ 5496.416075] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 63
Jul 20 17:51:18 pc2 kernel: [ 5496.416098] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 0
Jul 20 17:51:18 pc2 kernel: [ 5496.416112] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 1
Jul 20 17:51:18 pc2 kernel: [ 5496.416128] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 3
Jul 20 17:51:18 pc2 kernel: [ 5496.416142] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 4
Jul 20 17:51:18 pc2 kernel: [ 5496.416157] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 6
Jul 20 17:51:18 pc2 kernel: [ 5496.416170] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 7
Jul 20 17:51:18 pc2 kernel: [ 5496.416186] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 9
Jul 20 17:51:18 pc2 kernel: [ 5496.416200] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 10
Jul 20 17:51:18 pc2 kernel: [ 5496.417799] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 12
Jul 20 17:51:18 pc2 kernel: [ 5496.417814] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 14
Jul 20 17:51:18 pc2 kernel: [ 5496.417823] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 15
Jul 20 17:51:18 pc2 kernel: [ 5496.420927] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 16
Jul 20 17:51:18 pc2 kernel: [ 5496.420948] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 17
Jul 20 17:51:18 pc2 kernel: [ 5496.421164] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 19
Jul 20 17:51:18 pc2 kernel: [ 5496.421169] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 20
Jul 20 17:51:18 pc2 kernel: [ 5496.421802] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 22
Jul 20 17:51:18 pc2 kernel: [ 5496.421829] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 23
Jul 20 17:51:18 pc2 kernel: [ 5496.421922] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 25
Jul 20 17:51:18 pc2 kernel: [ 5496.424431] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 26
Jul 20 17:51:18 pc2 kernel: [ 5496.424459] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 27
Jul 20 17:51:18 pc2 kernel: [ 5496.424683] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 29
Jul 20 17:51:18 pc2 kernel: [ 5496.424708] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 30
Jul 20 17:51:18 pc2 kernel: [ 5496.424916] phy0 ->
rt2800usb_txdone_entry_check: Warning - TX status report missed for
queue 2 entry 32
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
