Use the valid calibration mask for init calibration
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-commands.h | 16 +++++++++++++---
1 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 1c0dea2..d7f20c8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -3167,9 +3167,6 @@ enum {
#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE (253)
-#define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(0xffffffff)
-#define IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK cpu_to_le32(BIT(0))
-
/* This enum defines the bitmap of various calibrations to enable in both
* init ucode and runtime ucode through CALIBRATION_CFG_CMD.
*/
@@ -3187,6 +3184,19 @@ enum iwl_ucode_calib_cfg {
IWL_CALIB_CFG_TX_PWR_IDX = BIT(10),
};
+#define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX | \
+ IWL_CALIB_CFG_DC_IDX | \
+ IWL_CALIB_CFG_LO_IDX | \
+ IWL_CALIB_CFG_TX_IQ_IDX | \
+ IWL_CALIB_CFG_RX_IQ_IDX | \
+ IWL_CALIB_CFG_NOISE_IDX | \
+ IWL_CALIB_CFG_CRYSTAL_IDX | \
+ IWL_CALIB_CFG_TEMPERATURE_IDX | \
+ IWL_CALIB_CFG_PAPD_IDX | \
+ IWL_CALIB_CFG_SENSITIVITY_IDX | \
+ IWL_CALIB_CFG_TX_PWR_IDX)
+
+#define IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK cpu_to_le32(BIT(0))
struct iwl_calib_cfg_elmnt_s {
__le32 is_enable;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
