Search Linux Wireless

Re: [PATCH] rtlwifi: Convert printks to pr_<level>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/20/2011 10:51 AM, Joe Perches wrote:
Use the current logging styles.
Add pr_fmt where appropriate.
Remove now unnecessary prefixes from printks.
Convert hard coded prefix to __func__.
Add a missing "\n" to a format.

Signed-off-by: Joe Perches<joe@xxxxxxxxxxx>
---
  drivers/net/wireless/rtlwifi/base.c               |    9 ++-
  drivers/net/wireless/rtlwifi/cam.c                |    4 +-
  drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c |    5 +-
  drivers/net/wireless/rtlwifi/rtl8192cu/hw.c       |   69 ++++++++------------
  drivers/net/wireless/rtlwifi/rtl8192cu/mac.c      |   11 ++-
  drivers/net/wireless/rtlwifi/rtl8192de/sw.c       |    8 +-
  drivers/net/wireless/rtlwifi/rtl8192se/hw.c       |   10 ++--
  drivers/net/wireless/rtlwifi/rtl8192se/phy.c      |    5 +-
  drivers/net/wireless/rtlwifi/rtl8192se/rf.c       |    4 +-
  drivers/net/wireless/rtlwifi/rtl8192se/sw.c       |    6 +-
  drivers/net/wireless/rtlwifi/usb.c                |   12 ++--
  11 files changed, 72 insertions(+), 71 deletions(-)

diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index bc13533..d88e405 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include<linux/ip.h>
  #include "wifi.h"
  #include "rc.h"
@@ -397,8 +399,8 @@ void rtl_init_rfkill(struct ieee80211_hw *hw)
  	radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw,&valid);

  	if (valid) {
-		printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
-				rtlpriv->rfkill.rfkill_state ? "on" : "off");
+		pr_info("wireless switch is %s\n",
+			rtlpriv->rfkill.rfkill_state ? "on" : "off");

  		rtlpriv->rfkill.rfkill_state = radio_state;

@@ -1402,8 +1404,7 @@ MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
  static int __init rtl_core_module_init(void)
  {
  	if (rtl_rate_control_register())
-		printk(KERN_ERR "rtlwifi: Unable to register rtl_rc,"
-		       "use default RC !!\n");
+		pr_err("Unable to register rtl_rc, use default RC !!\n");

  	return 0;
  }
diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
index 7295af0..b12a668 100644
--- a/drivers/net/wireless/rtlwifi/cam.c
+++ b/drivers/net/wireless/rtlwifi/cam.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include "wifi.h"
  #include "cam.h"

@@ -347,7 +349,7 @@ void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr)
  			/* Remove from HW Security CAM */
  			memset(rtlpriv->sec.hwsec_cam_sta_addr[i], 0, ETH_ALEN);
  			rtlpriv->sec.hwsec_cam_bitmap&= ~(BIT(0)<<  i);
-			printk(KERN_INFO "&&&&&&&&&del entry %d\n", i);
+			pr_info("&&&&&&&&&del entry %d\n", i);
  		}
  	}
  	return;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
index f9f2370..49a064b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include<linux/firmware.h>
  #include "../wifi.h"
  #include "../pci.h"
@@ -224,8 +226,7 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
  	u32 fwsize;
  	enum version_8192c version = rtlhal->version;

-	printk(KERN_INFO "rtl8192c: Loading firmware file %s\n",
-	       rtlpriv->cfg->fw_name);
+	pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name);
  	if (!rtlhal->pfirmware)
  		return 1;

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 2b34764..814c05d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include "../wifi.h"
  #include "../efuse.h"
  #include "../base.h"
@@ -337,7 +339,7 @@ static void _rtl92cu_read_board_type(struct ieee80211_hw *hw, u8 *contents)
  	rtlefuse->board_type = boardType;
  	if (IS_HIGHT_PA(rtlefuse->board_type))
  		rtlefuse->external_pa = 1;
-	printk(KERN_INFO "rtl8192cu: Board Type %x\n", rtlefuse->board_type);
+	pr_info("Board Type %x\n", rtlefuse->board_type);

  #ifdef CONFIG_ANTENNA_DIVERSITY
  	/* Antenna Diversity setting. */
@@ -346,8 +348,7 @@ static void _rtl92cu_read_board_type(struct ieee80211_hw *hw, u8 *contents)
  	else
  		rtl_efuse->antenna_cfg = registry_par->antdiv_cfg; /* 0:OFF, */

-	printk(KERN_INFO "rtl8192cu: Antenna Config %x\n",
-	       rtl_efuse->antenna_cfg);
+	pr_info("Antenna Config %x\n", rtl_efuse->antenna_cfg);
  #endif
  }

@@ -384,71 +385,57 @@ static void _update_bt_param(_adapter *padapter)
  	pbtpriv->bBTNonTrafficModeSet = _FALSE;
  	pbtpriv->CurrentState = 0;
  	pbtpriv->PreviousState = 0;
-	printk(KERN_INFO "rtl8192cu: BT Coexistance = %s\n",
-	       (pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
+	pr_info("BT Coexistance = %s\n",
+		(pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
  	if (pbtpriv->BT_Coexist) {
  		if (pbtpriv->BT_Ant_Num == Ant_x2)
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "Ant_Num = Antx2\n");
+			pr_info("BlueTooth BT_Ant_Num = Antx2\n");
  		else if (pbtpriv->BT_Ant_Num == Ant_x1)
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "Ant_Num = Antx1\n");
+			pr_info("BlueTooth BT_Ant_Num = Antx1\n");
  		switch (pbtpriv->BT_CoexistType) {
  		case BT_2Wire:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "CoexistType = BT_2Wire\n");
+			pr_info("BlueTooth BT_CoexistType = BT_2Wire\n");
  			break;
  		case BT_ISSC_3Wire:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "CoexistType = BT_ISSC_3Wire\n");
+			pr_info("BlueTooth BT_CoexistType = BT_ISSC_3Wire\n");
  			break;
  		case BT_Accel:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "CoexistType = BT_Accel\n");
+			pr_info("BlueTooth BT_CoexistType = BT_Accel\n");
  			break;
  		case BT_CSR_BC4:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "CoexistType = BT_CSR_BC4\n");
+			pr_info("BlueTooth BT_CoexistType = BT_CSR_BC4\n");
  			break;
  		case BT_CSR_BC8:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "CoexistType = BT_CSR_BC8\n");
+			pr_info("BlueTooth BT_CoexistType = BT_CSR_BC8\n");
  			break;
  		case BT_RTL8756:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "CoexistType = BT_RTL8756\n");
+			pr_info("BlueTooth BT_CoexistType = BT_RTL8756\n");
  			break;
  		default:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
-			       "CoexistType = Unknown\n");
+			pr_info("BlueTooth BT_CoexistType = Unknown\n");
  			break;
  		}
-		printk(KERN_INFO "rtl8192cu: BlueTooth BT_Ant_isolation = %d\n",
-		       pbtpriv->BT_Ant_isolation);
+		pr_info("BlueTooth BT_Ant_isolation = %d\n",
+			pbtpriv->BT_Ant_isolation);
  		switch (pbtpriv->BT_Service) {
  		case BT_OtherAction:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
-			       "BT_OtherAction\n");
+			pr_info("BlueTooth BT_Service = BT_OtherAction\n");
  			break;
  		case BT_SCO:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
-			       "BT_SCO\n");
+			pr_info("BlueTooth BT_Service = BT_SCO\n");
  			break;
  		case BT_Busy:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
-			       "BT_Busy\n");
+			pr_info("BlueTooth BT_Service = BT_Busy\n");
  			break;
  		case BT_OtherBusy:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
-			       "BT_OtherBusy\n");
+			pr_info("BlueTooth BT_Service = BT_OtherBusy\n");
  			break;
  		default:
-			printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
-			       "BT_Idle\n");
+			pr_info("BlueTooth BT_Service = BT_Idle\n");
  			break;
  		}
-		printk(KERN_INFO "rtl8192cu: BT_RadioSharedType = 0x%x\n",
-		       pbtpriv->BT_RadioSharedType);
+		pr_info("BT_RadioSharedType = 0x%x\n",
+			pbtpriv->BT_RadioSharedType);
  	}
  }

@@ -526,7 +513,7 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
  		usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
  		*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
  	}
-	printk(KERN_INFO "rtl8192cu: MAC address: %pM\n", rtlefuse->dev_addr);
+	pr_info("MAC address: %pM\n", rtlefuse->dev_addr);
  	_rtl92cu_read_txpower_info_from_hwpg(hw,
  					   rtlefuse->autoload_failflag, hwinfo);
  	rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
@@ -665,7 +652,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
  	rtl_write_word(rtlpriv, REG_APS_FSMCO, value16);
  	do {
  		if (!(rtl_read_word(rtlpriv, REG_APS_FSMCO)&  APFM_ONMAC)) {
-			printk(KERN_INFO "rtl8192cu: MAC auto ON okay!\n");
+			pr_info("MAC auto ON okay!\n");
  			break;
  		}
  		if (pollingCount++>  100) {
@@ -819,7 +806,7 @@ static void _rtl92cu_init_chipN_one_out_ep_priority(struct ieee80211_hw *hw,
  	}
  	_rtl92c_init_chipN_reg_priority(hw, value, value, value, value,
  					value, value);
-	printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
+	pr_info("Tx queue select: 0x%02x\n", queue_sel);
  }

  static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw,
@@ -863,7 +850,7 @@ static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw,
  		hiQ = valueHi;
  	}
  	_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
-	printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
+	pr_info("Tx queue select: 0x%02x\n", queue_sel);
  }

  static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
index a90c09b..194fc69 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -26,6 +26,9 @@
   * Larry Finger<Larry.Finger@xxxxxxxxxxxx>
   *
  ****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include<linux/module.h>

  #include "../wifi.h"
@@ -213,14 +216,14 @@ bool rtl92c_init_llt_table(struct ieee80211_hw *hw, u32 boundary)
  	for (i = 0; i<  (boundary - 1); i++) {
  		rst = rtl92c_llt_write(hw, i , i + 1);
  		if (true != rst) {
-			printk(KERN_ERR "===>  %s #1 fail\n", __func__);
+			pr_err("===>  %s #1 fail\n", __func__);
  			return rst;
  		}
  	}
  	/* end of list */
  	rst = rtl92c_llt_write(hw, (boundary - 1), 0xFF);
  	if (true != rst) {
-		printk(KERN_ERR "===>  %s #2 fail\n", __func__);
+		pr_err("===>  %s #2 fail\n", __func__);
  		return rst;
  	}
  	/* Make the other pages as ring buffer
@@ -231,14 +234,14 @@ bool rtl92c_init_llt_table(struct ieee80211_hw *hw, u32 boundary)
  	for (i = boundary; i<  LLT_LAST_ENTRY_OF_TX_PKT_BUFFER; i++) {
  		rst = rtl92c_llt_write(hw, i, (i + 1));
  		if (true != rst) {
-			printk(KERN_ERR "===>  %s #3 fail\n", __func__);
+			pr_err("===>  %s #3 fail\n", __func__);
  			return rst;
  		}
  	}
  	/* Let last entry point to the start entry of ring buffer */
  	rst = rtl92c_llt_write(hw, LLT_LAST_ENTRY_OF_TX_PKT_BUFFER, boundary);
  	if (true != rst) {
-		printk(KERN_ERR "===>  %s #4 fail\n", __func__);
+		pr_err("===>  %s #4 fail\n", __func__);
  		return rst;
  	}
  	return rst;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
index 0883774..351765d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include<linux/vmalloc.h>

  #include "../wifi.h"
@@ -170,10 +172,8 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
  	}

  	if (!header_print) {
-		printk(KERN_INFO "rtl8192de: Driver for Realtek RTL8192DE"
-		       " WLAN interface");
-		printk(KERN_INFO "rtl8192de: Loading firmware file %s\n",
-		       rtlpriv->cfg->fw_name);
+		pr_info("Driver for Realtek RTL8192DE WLAN interface\n");
+		pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name);
  		header_print++;
  	}
  	/* request fw */
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index b1d0213..73142a9 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include "../wifi.h"
  #include "../efuse.h"
  #include "../base.h"
@@ -465,8 +467,7 @@ static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data)
  			if ((tmpvalue&  BIT(6)))
  				break;

-			printk(KERN_ERR "wait for BIT(6) return value %x\n",
-			       tmpvalue);
+			pr_err("wait for BIT(6) return value %x\n", tmpvalue);
  			if (waitcount == 0)
  				break;

@@ -1255,8 +1256,7 @@ static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
  			if ((tmp&  BIT(6)))
  				break;

-			printk(KERN_ERR "wait for BIT(6) return value %x\n",
-			       tmp);
+			pr_err("wait for BIT(6) return value %x\n", tmp);

  			if (waitcnt == 0)
  				break;
@@ -1315,7 +1315,7 @@ static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
  	if (u1btmp&  BIT(7)) {
  		u1btmp&= ~(BIT(6) | BIT(7));
  		if (!_rtl92s_set_sysclk(hw, u1btmp)) {
-			printk(KERN_ERR "Switch ctrl path fail\n");
+			pr_err("Switch ctrl path fail\n");
  			return;
  		}
  	}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
index 81a5aa4..f27171a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include "../wifi.h"
  #include "../pci.h"
  #include "../ps.h"
@@ -1016,8 +1018,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
  	rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);

  	if (rtstatus != true) {
-		printk(KERN_ERR  "_rtl92s_phy_bb_config_parafile(): "
-		       "AGC Table Fail\n");
+		pr_err("%s(): AGC Table Fail\n", __func__);
  		goto phy_BB8190_Config_ParaFile_Fail;
  	}

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
index c6e3a4c..0ad50fe 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include "../wifi.h"
  #include "reg.h"
  #include "def.h"
@@ -507,7 +509,7 @@ bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
  		}

  		if (rtstatus != true) {
-			printk(KERN_ERR "Radio[%d] Fail!!", rfpath);
+			pr_err("Radio[%d] Fail!!\n", rfpath);
  			goto fail;
  		}

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 1c6cb1d..3876078 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -27,6 +27,8 @@
   *
   *****************************************************************************/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include<linux/vmalloc.h>

  #include "../wifi.h"
@@ -183,8 +185,8 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
  		return 1;
  	}

-	printk(KERN_INFO "rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE\n"
-	       "           Loading firmware %s\n", rtlpriv->cfg->fw_name);
+	pr_info("Driver for Realtek RTL8192SE/RTL8191SE\n"
+		"Loading firmware %s\n", rtlpriv->cfg->fw_name);
  	/* request fw */
  	err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
  			rtlpriv->io.dev);
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index a9367eb..8b1cef0 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -24,6 +24,9 @@
   * Hsinchu 300, Taiwan.
   *
   *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
  #include<linux/usb.h>
  #include "core.h"
  #include "wifi.h"
@@ -104,9 +107,8 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request,
  				 pdata, len, 0); /* max. timeout */

  	if (status<  0)
-		printk(KERN_ERR "reg 0x%x, usbctrl_vendorreq TimeOut! "
-		       "status:0x%x value=0x%x\n", value, status,
-		       *(u32 *)pdata);
+		pr_err("reg 0x%x, usbctrl_vendorreq TimeOut! status:0x%x value=0x%x\n",
+		       value, status, *(u32 *)pdata);
  	return status;
  }

@@ -316,7 +318,7 @@ static int _rtl_usb_init_rx(struct ieee80211_hw *hw)
  	rtlusb->usb_rx_segregate_hdl =
  		rtlpriv->cfg->usb_interface_cfg->usb_rx_segregate_hdl;

-	printk(KERN_INFO "rtl8192cu: rx_max_size %d, rx_urb_num %d, in_ep %d\n",
+	pr_info("rx_max_size %d, rx_urb_num %d, in_ep %d\n",
  		rtlusb->rx_max_size, rtlusb->rx_urb_num, rtlusb->in_ep);
  	init_usb_anchor(&rtlusb->rx_submitted);
  	return 0;
@@ -580,7 +582,7 @@ static void _rtl_rx_completed(struct urb *_urb)
  		} else{
  			/* TO DO */
  			_rtl_rx_pre_process(hw, skb);
-			printk(KERN_ERR "rtlwifi: rx agg not supported\n");
+			pr_err("rx agg not supported\n");
  		}
  		goto resubmit;
  	}

Joe,

In general these look good, but why not define pr_fmt in rtlwifi/wifi.h. That header is used by every source file, and you only need the define once.

Larry

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux