Search Linux Wireless

[PATCH 33/35] staging: brcm80211: use wait queues instead of semaphores in wl_cfg80211.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arend van Spriel <arend@xxxxxxxxxxxx>

In wl_cfg80211.c two semaphores were used to trigger a task to process
an event. The wait queues are better suited for that purpose. This also
removes checkpatch warning on sema_init() calls in this source file.

Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Reviewed-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Franky Lin <frankyl@xxxxxxxxxxxx>
---
 drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c |   28 +++++++++++++++++----
 drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h |    5 +--
 2 files changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
index 440ae6d..1199397 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3165,7 +3165,7 @@ static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_priv *cfg_priv)
 
 static s32 brcmf_create_event_handler(struct brcmf_cfg80211_priv *cfg_priv)
 {
-	sema_init(&cfg_priv->event_sync, 0);
+	init_waitqueue_head(&cfg_priv->event_waitq);
 	cfg_priv->event_tsk = kthread_run(brcmf_event_handler, cfg_priv,
 					  "wl_event_handler");
 	if (IS_ERR(cfg_priv->event_tsk)) {
@@ -3227,7 +3227,7 @@ static s32 brcmf_wakeup_iscan(struct brcmf_cfg80211_iscan_ctrl *iscan)
 {
 	if (likely(iscan->state != WL_ISCAN_STATE_IDLE)) {
 		WL_SCAN("wake up iscan\n");
-		up(&iscan->sync);
+		wake_up(&iscan->waitq);
 		return 0;
 	}
 
@@ -3333,13 +3333,19 @@ static s32 brcmf_iscan_thread(void *data)
 			(struct brcmf_cfg80211_iscan_ctrl *)data;
 	struct brcmf_cfg80211_priv *cfg_priv = iscan_to_cfg(iscan);
 	struct brcmf_cfg80211_iscan_eloop *el = &iscan->el;
+	DECLARE_WAITQUEUE(wait, current);
 	u32 status;
 	int err = 0;
 
 	sched_setscheduler(current, SCHED_FIFO, &param);
 	allow_signal(SIGTERM);
 	status = BRCMF_SCAN_RESULTS_PARTIAL;
-	while (likely(!down_interruptible(&iscan->sync))) {
+	add_wait_queue(&iscan->waitq, &wait);
+	while (1) {
+		prepare_to_wait(&iscan->waitq, &wait, TASK_INTERRUPTIBLE);
+
+		schedule();
+
 		if (kthread_should_stop())
 			break;
 		if (iscan->timer_on) {
@@ -3356,6 +3362,7 @@ static s32 brcmf_iscan_thread(void *data)
 		rtnl_unlock();
 		el->handler[status](cfg_priv);
 	}
+	finish_wait(&iscan->waitq, &wait);
 	if (iscan->timer_on) {
 		del_timer_sync(&iscan->timer);
 		iscan->timer_on = 0;
@@ -3383,7 +3390,7 @@ static s32 brcmf_invoke_iscan(struct brcmf_cfg80211_priv *cfg_priv)
 
 	if (cfg_priv->iscan_on && !iscan->tsk) {
 		iscan->state = WL_ISCAN_STATE_IDLE;
-		sema_init(&iscan->sync, 0);
+		init_waitqueue_head(&iscan->waitq);
 		iscan->tsk = kthread_run(brcmf_iscan_thread, iscan, "wl_iscan");
 		if (IS_ERR(iscan->tsk)) {
 			WL_ERR("Could not create iscan thread\n");
@@ -3531,7 +3538,7 @@ void brcmf_cfg80211_detach(void)
 
 static void brcmf_wakeup_event(struct brcmf_cfg80211_priv *cfg_priv)
 {
-	up(&cfg_priv->event_sync);
+	wake_up(&cfg_priv->event_waitq);
 }
 
 static s32 brcmf_event_handler(void *data)
@@ -3540,12 +3547,20 @@ static s32 brcmf_event_handler(void *data)
 			(struct brcmf_cfg80211_priv *)data;
 	struct sched_param param = {.sched_priority = MAX_RT_PRIO - 1 };
 	struct brcmf_cfg80211_event_q *e;
+	DECLARE_WAITQUEUE(wait, current);
 
 	sched_setscheduler(current, SCHED_FIFO, &param);
 	allow_signal(SIGTERM);
-	while (likely(!down_interruptible(&cfg_priv->event_sync))) {
+	add_wait_queue(&cfg_priv->event_waitq, &wait);
+	while (1) {
+		prepare_to_wait(&cfg_priv->event_waitq, &wait,
+				TASK_INTERRUPTIBLE);
+
+		schedule();
+
 		if (kthread_should_stop())
 			break;
+
 		e = brcmf_deq_event(cfg_priv);
 		if (unlikely(!e)) {
 			WL_ERR("event queue empty...\n");
@@ -3561,6 +3576,7 @@ static s32 brcmf_event_handler(void *data)
 
 		brcmf_put_event(e);
 	}
+	finish_wait(&cfg_priv->event_waitq, &wait);
 	WL_INFO("was terminated\n");
 	return 0;
 }
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
index 48f10d0..e25c755 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
@@ -249,7 +249,7 @@ struct brcmf_cfg80211_iscan_ctrl {
 	u32 timer_on;
 	s32 state;
 	struct task_struct *tsk;
-	struct semaphore sync;
+	wait_queue_head_t waitq;
 	struct brcmf_cfg80211_iscan_eloop el;
 	void *data;
 	s8 ioctl_buf[BRCMF_C_IOCTL_SMLEN];
@@ -295,13 +295,12 @@ struct brcmf_cfg80211_priv {
 						 cfg80211 layer */
 	struct brcmf_cfg80211_ie ie;	/* information element object for
 					 internal purpose */
-	struct semaphore event_sync;	/* for synchronization of main event
-					 thread */
 	struct brcmf_cfg80211_profile *profile;	/* holding dongle profile */
 	struct brcmf_cfg80211_iscan_ctrl *iscan;	/* iscan controller */
 	struct brcmf_cfg80211_connect_info conn_info; /* association info */
 	struct brcmf_cfg80211_pmk_list *pmk_list;	/* wpa2 pmk list */
 	struct task_struct *event_tsk;	/* task of main event handler thread */
+	wait_queue_head_t event_waitq;	/* wait queue for main event handling */
 	unsigned long status;		/* current dongle status */
 	void *pub;
 	u32 channel;		/* current channel */
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux