On 9 July 2011 13:06, Hauke Mehrtens <hauke@xxxxxxxxxx> wrote: > This patch add support for the bcma bus. Broadcom uses only Mips 74K > CPUs on the new SoC and on the old ons using ssb bus there are no Mips > 74K CPUs. > > Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx> > --- > arch/mips/bcm47xx/Kconfig | 13 ++++++ > arch/mips/bcm47xx/gpio.c | 22 +++++++++++ > arch/mips/bcm47xx/nvram.c | 10 +++++ > arch/mips/bcm47xx/serial.c | 29 ++++++++++++++ > arch/mips/bcm47xx/setup.c | 53 +++++++++++++++++++++++++- > arch/mips/bcm47xx/time.c | 5 ++ > arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 8 ++++ > arch/mips/include/asm/mach-bcm47xx/gpio.h | 41 ++++++++++++++++++++ > drivers/watchdog/bcm47xx_wdt.c | 11 +++++ > 9 files changed, 190 insertions(+), 2 deletions(-) > > diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig > index 0346f92..6210b8d 100644 > --- a/arch/mips/bcm47xx/Kconfig > +++ b/arch/mips/bcm47xx/Kconfig > @@ -15,4 +15,17 @@ config BCM47XX_SSB > > This will generate an image with support for SSB and MIPS32 R1 instruction set. > > +config BCM47XX_BCMA > + bool "BCMA Support for Broadcom BCM47XX" > + select SYS_HAS_CPU_MIPS32_R2 > + select BCMA > + select BCMA_HOST_SOC > + select BCMA_DRIVER_MIPS > + select BCMA_DRIVER_PCI_HOSTMODE if PCI > + default y > + help > + Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. > + > + This will generate an image with support for BCMA and MIPS32 R2 instruction set. > + BCM47XX_SSB and BCM47XX_BCMA should either exclude each other, or SYS_HAS_CPU_MIPS32_R2 should only be selected when BCM47XX_SSB isn't selected. I would expect an image built when having both selected to also support both systems, but selecting MIPS32_R2 as the CPU this will make it actually not work on SSB systems. > diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c > index 3320e91..9d5bafe 100644 > --- a/arch/mips/bcm47xx/gpio.c > +++ b/arch/mips/bcm47xx/gpio.c > @@ -36,6 +36,16 @@ int gpio_request(unsigned gpio, const char *tag) > > return 0; > #endif > +#ifdef CONFIG_BCM47XX_BCMA > + case BCM47XX_BUS_TYPE_BCMA: > + if ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES) gpio is already unsigned, you shouldn't need to cast it. > + return -EINVAL; > + > + if (test_and_set_bit(gpio, gpio_in_use)) > + return -EBUSY; > + > + return 0; > +#endif > } > return -EINVAL; > } > @@ -57,6 +67,14 @@ void gpio_free(unsigned gpio) > clear_bit(gpio, gpio_in_use); > return; > #endif > +#ifdef CONFIG_BCM47XX_BCMA > + case BCM47XX_BUS_TYPE_BCMA: > + if ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES) Ditto. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
