During scans the full calibration usually does not make much sense, PAPD probing and IQ calibration should be deferred until there is enough time to complete them. Adding 100 ms to the initial full calibration delay should be enough to do this. Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> Acked-by: Nick Kossifidis <mickflemm@xxxxxxxxx> --- drivers/net/wireless/ath/ath5k/base.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 523bb08..3b58e00 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2725,7 +2725,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, ath5k_ani_init(ah, ani_mode); - ah->ah_cal_next_full = jiffies; + ah->ah_cal_next_full = jiffies + msecs_to_jiffies(100); ah->ah_cal_next_ani = jiffies; ah->ah_cal_next_nf = jiffies; ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8); -- 1.7.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
