W dniu 26 czerwca 2011 22:48 użytkownik Rafał Miłecki <zajec5@xxxxxxxxx> napisał: > W dniu 23 czerwca 2011 22:30 użytkownik Larry Finger > <Larry.Finger@xxxxxxxxxxxx> napisał: >> Rafał and John, >> >> I was doing routine testing today on 3.0-rc4 kernels built from >> wireless-testing and Linus's mainline git tree. To my surprise, I noticed an >> important difference on the netbook with a 14e4:4315 BCM4312 802.11b/g LP >> PHY device. Although b43 would work OK with light loads, it would always >> fail at heavy loads. Sometimes, it would get the "Out of order TX status" >> failure, and sometimes it would just lose the connection. As that machine is >> quite slow, I maintain its kernel source on an NFS volume exported by an >> x86_64 machine with fast CPUs and relatively fast disks. >> >> Until today, the BCM4312 had never been able to complete the "make >> modules_install" step needed to get a new kernel on the netbook, and would >> fail in the middle of copying the modules from the NFS volume to the local >> /lib/modules tree. After installing the wireless-testing 3.0-rc4 kernel >> using rtl8187 as the network driver, I was quite surprised to find that the >> new kernel could use b43 to install the new kernel from Linus's tree. After >> booting that kernel, the failure returned. >> >> I then made other load tests on the w-t kernel without failures. >> >> There are no real differences between the b43 sources in the two kernels. >> There are lots of changes associated with the bus reorganization; however >> these do not seem to cause the problem. >> >> Only one of the patches to ssb seems to be the "fix", namely commit eb40e3e8 >> entitled "drivers/ssb/driver_chipcommon_pmu.c: uninitilized warning" by >> Connor Hansen. I need to do more tests on this patch, but the kernel from >> Linus's tree could reinstall itself when I added this patch. I see no >> indication in the commit message regarding pushing this one to stable, but I >> think it should go upstream to mainline and the stable trees. > > It does not look like possible fix to me. Plus it sounds like false > warning from compiler. > > Take a look at relation between: > 1) updown_tab and updown_tab_size > 2) depend_tab and depend_tab_size > > Second value (*_size) is never used when first one is NULL. In switch > we don't change updown_tab or depend_tab. They are both NULL, so > updown_tab_size and depend_tab_size should never be checked at all. > > Could you do more tests about this, please? Larry, please, don't let this fix hide. As you can know, I've some problems with my BCM4312. Would like to hear what improved support for yours. -- Rafał -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
