Hi shafi, [Sorry for the duplicate, lost the Cc's the first time around.] On Fri, Jul 01, 2011 at 07:39:40PM +0530, Mohammed Shafi wrote: > On Fri, Jul 1, 2011 at 7:31 PM, Mohammed Shafi <shafi.wireless@xxxxxxxxx> wrote: > > On Fri, Jul 1, 2011 at 7:05 PM, Forest Bond <forest@xxxxxxxxxxxxxxxxxxx> wrote: > >> Now the module loads fine and appears to load the firmware correctly, but the > >> interface never comes up. Here's what happens when I insert the device: > >> > >> [ 206.270348] usb 5-7: new high speed USB device using ehci_hcd and address 5 > >> [ 206.422393] usb 5-7: configuration #1 chosen from 1 choice > >> [ 206.657723] Compat-wireless backport release: compat-wireless-v3.0-rc4-1 > >> [ 206.657732] Backport based on linux-2.6-allstable.git v3.0-rc4 > >> [ 206.864667] Calling CRDA to update world regulatory domain > >> [ 207.714633] usb 5-7: ath9k_htc: Transferred FW: htc_9271.fw, size: 51288 > >> [ 207.861037] ath9k_htc 5-7:1.0: ath9k_htc: HTC initialized with 33 credits > >> > >> At this point the interface is not visible in the output of ifconfig. Something > >> has gone wrong with USB, because lsusb hangs until I unplug the device, at which > >> point I see the following in dmesg: > >> > >> [ 225.464212] usb 5-7: USB disconnect, address 5 > >> [ 225.592282] ath: Reading Magic # failed > >> [ 225.592310] ath: no band has been marked as supported in EEPROM > >> [ 225.592315] ath: Unable to initialize hardware; initialization status: -22 > >> [ 225.592321] ath: Unable to initialize hardware; initialization status: -22 > >> [ 225.592336] Failed to initialize the device > >> [ 225.592400] ath9k_htc: probe of 5-7:1.0 failed with error -22 > >> [ 225.712249] usbcore: registered new interface driver ath9k_htc > > > > something wrong in reading EEPROM, please post the kernel log for > > sudo modprobe ath9k_htc debug debug=0x404 > > please do > sudo modprobe ath9k_htc debug=0xffffffff > this will give lots of information [ 98.421395] Compat-wireless backport release: compat-wireless-v3.0-rc4-1 [ 98.421405] Backport based on linux-2.6-allstable.git v3.0-rc4 [ 98.638709] Calling CRDA to update world regulatory domain [ 99.219353] usbcore: registered new interface driver ath9k_htc [ 103.829197] usb 5-7: new high speed USB device using ehci_hcd and address 5 [ 103.985215] usb 5-7: configuration #1 chosen from 1 choice [ 104.288053] usb 5-7: ath9k_htc: Transferred FW: htc_9271.fw, size: 51288 [ 104.448323] ath9k_htc 5-7:1.0: ath9k_htc: HTC initialized with 33 credits [ 104.453395] ath: UNDEFINED -> AWAKE [ 104.454654] ath: serialize_regmode is 0 [ 104.686218] ath: Timeout waiting for WMI command: WMI_REG_WRITE_CMDID [ 104.686240] ath: REGISTER WRITE FAILED, multi len: 9 [ 104.901237] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 104.901259] ath: REGISTER READ FAILED: (0x9c00, -110) [ 104.901276] ath: Reading from EEPROM, not flash [ 105.136983] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 105.137000] ath: Multiple REGISTER READ FAILED (count: 8) [ 105.408496] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 105.408513] ath: Multiple REGISTER READ FAILED (count: 8) [ 105.676507] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 105.676524] ath: Multiple REGISTER READ FAILED (count: 8) [ 105.911084] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 105.911106] ath: Multiple REGISTER READ FAILED (count: 8) [ 106.148500] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 106.148517] ath: Multiple REGISTER READ FAILED (count: 8) [ 106.380920] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 106.380933] ath: Multiple REGISTER READ FAILED (count: 8) [ 106.646720] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 106.646737] ath: Multiple REGISTER READ FAILED (count: 8) [ 106.877455] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 106.877473] ath: Multiple REGISTER READ FAILED (count: 8) [ 107.106916] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 107.106932] ath: Multiple REGISTER READ FAILED (count: 8) [ 107.327013] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 107.327029] ath: Multiple REGISTER READ FAILED (count: 8) [ 107.549431] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 107.549453] ath: Multiple REGISTER READ FAILED (count: 8) [ 107.784184] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 107.784205] ath: Multiple REGISTER READ FAILED (count: 8) [ 108.028850] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 108.028867] ath: Multiple REGISTER READ FAILED (count: 8) [ 108.268894] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 108.268911] ath: Multiple REGISTER READ FAILED (count: 8) [ 108.507164] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 108.507180] ath: Multiple REGISTER READ FAILED (count: 8) [ 108.746603] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 108.746619] ath: Multiple REGISTER READ FAILED (count: 8) [ 108.978447] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 108.978464] ath: Multiple REGISTER READ FAILED (count: 8) [ 109.219056] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 109.219069] ath: Multiple REGISTER READ FAILED (count: 8) [ 109.496668] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 109.496685] ath: Multiple REGISTER READ FAILED (count: 8) [ 109.735763] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 109.735780] ath: Multiple REGISTER READ FAILED (count: 8) [ 109.973853] ath: Timeout waiting for WMI command: WMI_REG_READ_CMDID [ 109.973869] ath: Multiple REGISTER READ FAILED (count: 8) > > make sure to enable CONFIG_ATH_DEBUG and ATH9K_HTC_DEBUGFS > > http://wireless.kernel.org/en/users/Drivers/ath9k/debug > > > > was this previously working? Not that I am aware of. This is this first time I've tried it. Thanks, Forest -- Forest Bond http://www.alittletooquiet.net http://www.rapidrollout.com
Attachment:
signature.asc
Description: Digital signature
