Hi Troy, On Tue, Jun 28, 2011 at 1:19 PM, Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx> wrote: <snip> > Thanks for taking a look. I'm pretty sure it is a hardware problem and > not software. proc/interrupts is showing the correct irq as claimed. > Looking at a scope, I'm just getting no activity on the WLAN_IRQ pin. Can you tell us what is the host configuration on the host pin? In other words, what type of detection - edge or level. Also, what is the pull configuration - up or down, and how much pull. The pull up/down configuration, if not correctly set, could explain why you don't see anything in the scope. > The datasheet says that the slow clock is 32768 HZ +/- 150 ppm. Mine > currently measures 32650. This needs fixed, but is unlikely to be my > problem isn't it? See if you can get closer to the required value, but I don't think it is the problem here either. Regards, Oz. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
