Search Linux Wireless

Re: can mesh(802.11s) be supported in 802.11n?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 15, 2011 at 6:13 PM, b z <zb80211@xxxxxxxxx> wrote:
> I have got 2 802.11n wireless routers using ralink rt3052f soc chip,mimo 2x2
> burned with openwrt (kernel 2.6.37.6, compat-wireless-2011-05-27)
>
> I configured them as mesh point respectively,  then
> #iw dev wlan0 station dump
>
> but the tx rate and rx rate still not exceed 54mbps, that is mean the
> ht mode(300mbps) is not been actived
>
> can anyone tell me how to active the 802.11n ht mode in mesh?
> it is the problem with mac80211 or rt2800pci driver?
> or mesh using 802.11n is not implemented in the current kernel?

yes HT mode is not yet supported in mesh (in mac80211). it should be
implemented in mac80211

>
> will it be implemented in the future?

some time back Luis sent this link
http://www.youtube.com/watch?v=sSUbCiEEP0k

> thank!
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
shafi
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux