Search Linux Wireless

Re: ath9k WDS panic without CONFIG_ATH9K_RATE_CONTROL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2011-06-16 11:54 PM, Pavel Roskin wrote:
On 06/15/2011 10:11 PM, Felix Fietkau wrote:

 Some time ago I sent some patches to fix the issues with WDS (and add
 support for HT, including aggregation).

 These patches assume that you set up an AP on both sides alongside the
 WDS interface (beacons of the APs are used to exchange rates and
 capabilities).

I think WDS should work without beacons.  At least the basic rates
should be available when the interface is brought up.  Further changes
to the set of supported rates can be made with iw.

WDS is somewhat orthogonal to the beacons.  The beacons are primarily
meant for the stations.
For 802.11n you need proper HT capabilites anyway. I think it usually doesn't make much sense to use WDS without AP interfaces, but if you consider it worth adding support for, then please build your patches on top of my patch series.

- Felix
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux