________________________________________
From: Mohammed Shafi Shajakhan [mohammed@xxxxxxxxxxxxxxxx]
Sent: 15 June 2011 18:25:31
To: linville@xxxxxxxxxxxxx
Cc: linux-wireless@xxxxxxxxxxxxxxx; Rodriguez, Luis; Shajakhan, Mohammed; Gulasekaran, Susinder; Balasubramanian, senthilkumar
Subject: [PATCH] ath9k: Add debug messages to track PAPRD failures
From: Mohammed Shafi Shajakhan <mshajakhan@xxxxxxxxxxx>
Add few debug messages for some of the possible scenarios
where we can detect PAPRD failures. this will help us to be
sure that we had really enabled PAPRD
Cc: susinder@xxxxxxxxxxxxxxxx
Cc: senthilb@xxxxxxxxxxxxxxxx
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/main.c | 15 +++++++++++----
1 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 7f94533..e0e0e86 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -360,7 +360,7 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int
txctl.paprd = BIT(chain);
if (ath_tx_start(hw, skb, &txctl) != 0) {
- ath_dbg(common, ATH_DBG_XMIT, "PAPRD TX failed\n");
+ ath_dbg(common, ATH_DBG_CALIBRATE, "PAPRD TX failed\n");
dev_kfree_skb_any(skb);
return false;
}
@@ -369,7 +369,7 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int
msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
if (!time_left)
- ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE,
+ ath_dbg(common, ATH_DBG_CALIBRATE,
"Timeout waiting for paprd training on TX chain %d\n",
chain);
@@ -431,11 +431,18 @@ void ath_paprd_calibrate(struct work_struct *work)
if (!ath_paprd_send_frame(sc, skb, chain))
goto fail_paprd;
- if (!ar9003_paprd_is_done(ah))
+ if (!ar9003_paprd_is_done(ah)) {
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "PAPRD not yet done on chain %d\n", chain);
break;
+ }
this message seems to indeed hit for AR9485, as this register value is different for AR9485
#define AR_PHY_PAPRD_TRAINER_STAT1 (AR_SM_BASE + 0x4a0)
- if (ar9003_paprd_create_curve(ah, caldata, chain) != 0)
+ if (ar9003_paprd_create_curve(ah, caldata, chain)) {
+ ath_dbg(common, ATH_DBG_CALIBRATE,
+ "PAPRD create curve failed on chain %d\n",
+ chain);
break;
+ }
chain_ok = 1;
}
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
