Add to compat-3.0-stable Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx> --- defconfigs/atheros-debug.mk | 248 ++++++++++++++++++++++++++----------------- 1 files changed, 150 insertions(+), 98 deletions(-) diff --git a/defconfigs/atheros-debug.mk b/defconfigs/atheros-debug.mk index d9534eb..fb884aa 100644 --- a/defconfigs/atheros-debug.mk +++ b/defconfigs/atheros-debug.mk @@ -14,20 +14,28 @@ else include $(KLIB_BUILD)/.config endif -# We will warn when you don't have MQ support or NET_SCHED enabled. -# -# We could consider just quiting if MQ and NET_SCHED is disabled -# as I suspect all users of this package want 802.11e (WME) and -# 802.11n (HT) support. ifneq ($(wildcard $(KLIB_BUILD)/Makefile),) -COMPAT_LATEST_VERSION = 37 -KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p') + +COMPAT_LATEST_VERSION = 1 + +KERNEL_VERSION := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^\([0-9]\)\..*/\1/p') + +ifneq ($(KERNEL_VERSION),2) +KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^3\.\([0-9]\+\).*/\1/p') +else +COMPAT_26LATEST_VERSION = 39 +KERNEL_26SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p') +COMPAT_26VERSIONS := $(shell I=$(COMPAT_26LATEST_VERSION); while [ "$$I" -gt $(KERNEL_26SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done) +$(foreach ver,$(COMPAT_26VERSIONS),$(eval CONFIG_COMPAT_KERNEL_2_6_$(ver)=y)) +KERNEL_SUBLEVEL := -1 +endif + COMPAT_VERSIONS := $(shell I=$(COMPAT_LATEST_VERSION); while [ "$$I" -gt $(KERNEL_SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done) -$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_$(ver)=y)) +$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_3_$(ver)=y)) -ifdef CONFIG_COMPAT_KERNEL_24 +ifdef CONFIG_COMPAT_KERNEL_2_6_24 $(error "ERROR: compat-wireless by default supports kernels >= 2.6.24, try enabling only one driver though") -endif #CONFIG_COMPAT_KERNEL_24 +endif #CONFIG_COMPAT_KERNEL_2_6_24 ifeq ($(CONFIG_CFG80211),y) $(error "ERROR: your kernel has CONFIG_CFG80211=y, you should have it CONFIG_CFG80211=m if you want to use this thing.") @@ -37,7 +45,7 @@ endif # 2.6.27 has FTRACE_DYNAMIC borked, so we will complain if # you have it enabled, otherwise you will very likely run into # a kernel panic. -ifeq ($(KERNEL_SUBLEVEL),27) +ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -eq 27 && echo yes),yes) ifeq ($(CONFIG_DYNAMIC_FTRACE),y) $(error "ERROR: Your 2.6.27 kernel has CONFIG_DYNAMIC_FTRACE, please upgrade your distribution kernel as newer ones should not have this enabled (and if so report a bug) or remove this warning if you know what you are doing") endif @@ -54,7 +62,7 @@ endif # # In kernel 2.6.32 both attributes were removed. # -ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes) +ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes) ifeq ($(CONFIG_MAC80211),) $(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.") endif @@ -62,6 +70,11 @@ endif ifneq ($(KERNELRELEASE),) # This prevents a warning +# We will warn when you don't have MQ support or NET_SCHED enabled. +# +# We could consider just quiting if MQ and NET_SCHED is disabled +# as I suspect all users of this package want 802.11e (WME) and +# 802.11n (HT) support. ifeq ($(CONFIG_NET_SCHED),) QOS_REQS_MISSING+=CONFIG_NET_SCHED endif @@ -92,21 +105,20 @@ else endif # The Bluetooth compatibility only builds on kernels >= 2.6.27 for now -ifndef CONFIG_COMPAT_KERNEL_27 +ifndef CONFIG_COMPAT_KERNEL_2_6_27 ifeq ($(CONFIG_BT),y) # we'll ignore compiling bluetooth else CONFIG_COMPAT_BLUETOOTH=y CONFIG_COMPAT_BLUETOOTH_MODULES=m endif -endif #CONFIG_COMPAT_KERNEL_27 +endif #CONFIG_COMPAT_KERNEL_2_6_27 -ifdef CONFIG_COMPAT_KERNEL_33 +ifdef CONFIG_COMPAT_KERNEL_2_6_33 ifdef CONFIG_FW_LOADER CONFIG_COMPAT_FIRMWARE_CLASS=m endif #CONFIG_FW_LOADER -endif #CONFIG_COMPAT_KERNEL_33 - +endif #CONFIG_COMPAT_KERNEL_2_6_33 # Wireless subsystem stuff CONFIG_MAC80211=m @@ -133,7 +145,9 @@ CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y +ifdef CONFIG_LEDS_TRIGGERS CONFIG_MAC80211_LEDS=y +endif #CONFIG_LEDS_TRIGGERS # enable mesh networking too CONFIG_MAC80211_MESH=y @@ -153,8 +167,8 @@ CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG=y CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m +CONFIG_COMPAT_BT_L2CAP=y +CONFIG_COMPAT_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -164,7 +178,9 @@ CONFIG_BT_BNEP_PROTO_FILTER=y ifdef CONFIG_ISDN_CAPI CONFIG_BT_CMTP=m endif #CONFIG_ISDN_CAPI -CONFIG_BT_HIDP=m +ifndef CONFIG_COMPAT_KERNEL_2_6_28 +CONFIG_COMPAT_BT_HIDP=m +endif #CONFIG_COMPAT_KERNEL_2_6_28 CONFIG_BT_HCIUART=M CONFIG_BT_HCIUART_H4=y @@ -196,26 +212,24 @@ else #CONFIG_CFG80211_WEXT $(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.") endif #CONFIG_WIRELESS_EXT -ifneq ($(CONFIG_STAGING),) - CONFIG_COMPAT_STAGING=m -endif +ifdef CONFIG_STAGING +CONFIG_COMPAT_STAGING=m +endif #CONFIG_STAGING # mac80211 test driver CONFIG_MAC80211_HWSIM=m -# PCI Drivers -ifdef CONFIG_PCI - CONFIG_ATH5K=m CONFIG_ATH5K_DEBUG=y -CONFIG_ATH9K_HW=m +# CONFIG_ATH5K_AHB=y + CONFIG_ATH9K=m -# Note: once ath9k_htc is added we'll have to move -# CONFIG_ATH9K_COMMON to an area that doesn't depend on PCI -# as you could then have ath9k disabled but ath9k_htc enabled. +CONFIG_ATH9K_HW=m CONFIG_ATH9K_COMMON=m CONFIG_ATH9K_DEBUGFS=y +# CONFIG_ATH9K_AHB=y CONFIG_ATH9K_PKTLOG=y + # Disable this to get minstrel as default, we leave the ath9k # rate control algorithm as the default for now as that is also # default upstream on the kernel. We will move this to minstrel @@ -224,15 +238,25 @@ CONFIG_ATH9K_PKTLOG=y # for long range considerations. CONFIG_ATH9K_RATE_CONTROL=y +# PCI Drivers +ifdef CONFIG_PCI -CONFIG_COMPAT_IWLWIFI=m +CONFIG_ATH5K_PCI=y +CONFIG_ATH9K_PCI=y + +CONFIG_IWLAGN=m # CONFIG_IWLWIFI_DEBUG=y # CONFIG_IWLWIFI_DEBUGFS=y # CONFIG_IWLWIFI_DEVICE_TRACING=y -CONFIG_IWLAGN=m -CONFIG_COMPAT_IWL4965=y -CONFIG_IWL5000=y +# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y +CONFIG_IWL_P2P=y + +CONFIG_IWLWIFI_LEGACY=m +CONFIG_COMPAT_IWL4965=m CONFIG_IWL3945=m +# CONFIG_IWLWIFI_LEGACY_DEBUG=y +# CONFIG_IWLWIFI_LEGACY_DEBUGFS=y +# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING=y CONFIG_B43=m @@ -241,16 +265,20 @@ CONFIG_B43_PCI_AUTOSELECT=y ifdef CONFIG_PCMCIA CONFIG_B43_PCMCIA=y endif #CONFIG_PCMCIA +ifdef CONFIG_MAC80211_LEDS CONFIG_B43_LEDS=y +endif #CONFIG_MAC80211_LEDS CONFIG_B43_PHY_LP=y -CONFIG_B43_NPHY=y +CONFIG_B43_PHY_N=y # CONFIG_B43_FORCE_PIO=y # CONFIG_B43_DEBUG=y CONFIG_B43LEGACY=m CONFIG_B43LEGACY_HWRNG=y CONFIG_B43LEGACY_PCI_AUTOSELECT=y +ifdef CONFIG_MAC80211_LEDS CONFIG_B43LEGACY_LEDS=y +endif #CONFIG_MAC80211_LEDS # CONFIG_B43LEGACY_DEBUG=y CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y @@ -286,7 +314,6 @@ endif #CONFIG_WIRELESS_EXT ifdef CONFIG_SSB # Sonics Silicon Backplane CONFIG_SSB_SPROM=y -# CONFIG_SSB_DEBUG=y CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST=y @@ -312,10 +339,9 @@ CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m ifdef CONFIG_CRC_CCITT CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_PCI=y -# CONFIG_RT2800PCI_RT30XX=y -# CONFIG_RT2800PCI_RT35XX=y -# CONFIG_RT2800PCI_SOC=y +CONFIG_RT2800PCI_RT33XX=y +CONFIG_RT2800PCI_RT35XX=y +# CONFIG_RT2800PCI_RT53XX=y endif #CONFIG_CRC_CCITT NEED_RT2X00=y @@ -324,7 +350,6 @@ NEED_RT2X00=y # driver as we're in the PCI section. ifdef CONFIG_CRC_ITU_T CONFIG_RT61PCI=m -NEED_RT2X00_FIRMWARE=y endif #CONFIG_CRC_ITU_T CONFIG_MWL8K=m @@ -333,11 +358,11 @@ CONFIG_MWL8K=m CONFIG_ATL1=m CONFIG_ATL2=m CONFIG_ATL1E=m -ifdef CONFIG_COMPAT_KERNEL_27 +ifdef CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_ATL1C=n -else #CONFIG_COMPAT_KERNEL_27 +else #CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_ATL1C=m -endif #CONFIG_COMPAT_KERNEL_27 +endif #CONFIG_COMPAT_KERNEL_2_6_27 ifdef CONFIG_WIRELESS_EXT CONFIG_HERMES=m @@ -355,18 +380,25 @@ CONFIG_PCMCIA_SPECTRUM=m endif #CONFIG_PCMCIA endif #CONFIG_WIRELESS_EXT +CONFIG_RTL8192CE=m +CONFIG_RTL8192SE=m + +ifdef CONFIG_COMPAT_STAGING +CONFIG_BRCMSMAC=m +endif #CONFIG_COMPAT_STAGING + endif #CONFIG_PCI ## end of PCI ifdef CONFIG_PCMCIA -ifdef CONFIG_COMPAT_KERNEL_27 +ifdef CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS=n CONFIG_LIBERTAS_CS=n -else #CONFIG_COMPAT_KERNEL_27 +else #CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS_CS=m NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_27 +endif #CONFIG_COMPAT_KERNEL_2_6_27 endif #CONFIG_PCMCIA ## end of PCMCIA @@ -376,8 +408,10 @@ CONFIG_EEPROM_93CX6=m # USB Drivers ifdef CONFIG_USB -CONFIG_ZD1211RW=m +ifndef CONFIG_COMPAT_KERNEL_2_6_29 +CONFIG_COMPAT_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG=y +endif #CONFIG_COMPAT_KERNEL_2_6_29 # Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat... @@ -386,38 +420,41 @@ CONFIG_ZD1211RW=m # is only wireless RNDIS chip known to date. # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER # it also requires new RNDIS_HOST and CDC_ETHER modules which we add -ifdef CONFIG_COMPAT_KERNEL_29 +ifdef CONFIG_COMPAT_KERNEL_2_6_29 CONFIG_USB_COMPAT_USBNET=n CONFIG_USB_NET_COMPAT_RNDIS_HOST=n CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n CONFIG_USB_NET_COMPAT_CDCETHER=n -else #CONFIG_COMPAT_KERNEL_29 +else #CONFIG_COMPAT_KERNEL_2_6_29 CONFIG_USB_COMPAT_USBNET=m ifdef CONFIG_USB_NET_CDCETHER CONFIG_USB_NET_COMPAT_RNDIS_HOST=m CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m endif #CONFIG_USB_NET_CDCETHER +ifdef CONFIG_USB_NET_CDCETHER_MODULE +CONFIG_USB_NET_COMPAT_RNDIS_HOST=m +CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m +endif #CONFIG_USB_NET_CDCETHER CONFIG_USB_NET_COMPAT_CDCETHER=m -endif #CONFIG_COMPAT_KERNEL_29 +endif #CONFIG_COMPAT_KERNEL_2_6_29 CONFIG_P54_USB=m CONFIG_RTL8187=m +ifdef CONFIG_MAC80211_LEDS CONFIG_RTL8187_LEDS=y +endif #CONFIG_MAC80211_LEDS CONFIG_AT76C50X_USB=m -ifndef CONFIG_COMPAT_KERNEL_28 -CONFIG_AR9170_USB=m -CONFIG_AR9170_LEDS=y -endif #CONFIG_COMPAT_KERNEL_28 - -ifndef CONFIG_COMPAT_KERNEL_29 +ifndef CONFIG_COMPAT_KERNEL_2_6_29 CONFIG_CARL9170=m +ifdef CONFIG_MAC80211_LEDS CONFIG_CARL9170_LEDS=y +endif #CONFIG_MAC80211_LEDS CONFIG_CARL9170_DEBUGFS=y CONFIG_CARL9170_WPC=y -endif #CONFIG_COMPAT_KERNEL_29 +endif #CONFIG_COMPAT_KERNEL_2_6_29 # This activates a threading fix for usb urb. # this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351 @@ -431,8 +468,9 @@ CONFIG_ATH9K_HTC_DEBUGFS=y CONFIG_RT2500USB=m ifdef CONFIG_CRC_CCITT CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT30XX=y +CONFIG_RT2800USB_RT33XX=y CONFIG_RT2800USB_RT35XX=y +# CONFIG_RT2800USB_RT53XX=y CONFIG_RT2800USB_UNKNOWN=y endif #CONFIG_CRC_CCITT CONFIG_RT2X00_LIB_USB=m @@ -440,18 +478,17 @@ NEED_RT2X00=y # RT73USB requires firmware ifdef CONFIG_CRC_ITU_T CONFIG_RT73USB=m -NEED_RT2X00_FIRMWARE=y endif #CONFIG_CRC_ITU_T -ifdef CONFIG_COMPAT_KERNEL_27 +ifdef CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS_THINFIRM_USB=n CONFIG_LIBERTAS_USB=n NEED_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_27 +else #CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_LIBERTAS_USB=m NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_27 +endif #CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_ORINOCO_USB=m @@ -461,26 +498,28 @@ CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_ATH3K=m +CONFIG_RTL8192CU=m + endif #CONFIG_USB end of USB driver list ifdef CONFIG_SPI_MASTER -ifndef CONFIG_COMPAT_KERNEL_25 +ifndef CONFIG_COMPAT_KERNEL_2_6_25 ifdef CONFIG_CRC7 CONFIG_WL1251_SPI=m -CONFIG_WL1271_SPI=m +CONFIG_WL12XX_SPI=m endif #CONFIG_CRC7 CONFIG_P54_SPI=m -ifdef CONFIG_COMPAT_KERNEL_27 +ifdef CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS_SPI=n NEED_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_27 +else #CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS_SPI=m NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_27 +endif #CONFIG_COMPAT_KERNEL_2_6_27 -endif #CONFIG_COMPAT_KERNEL_25 +endif #CONFIG_COMPAT_KERNEL_2_6_25 endif #CONFIG_SPI_MASTER end of SPI driver list ifdef CONFIG_MMC @@ -489,23 +528,27 @@ CONFIG_SSB_SDIOHOST=y CONFIG_B43_SDIO=y ifdef CONFIG_CRC7 -CONFIG_WL1251_SDIO=m +ifdef CONFIG_WL12XX_PLATFORM_DATA +CONFIG_COMPAT_WL1251_SDIO=m +endif #CONFIG_WL12XX_PLATFORM_DATA -ifndef CONFIG_COMPAT_KERNEL_32 +ifndef CONFIG_COMPAT_KERNEL_2_6_32 ifdef CONFIG_WL12XX_PLATFORM_DATA -CONFIG_WL1271_SDIO=m +CONFIG_COMPAT_WL12XX_SDIO=m endif #CONFIG_WL12XX_PLATFORM_DATA -endif #CONFIG_COMPAT_KERNEL_32 +endif #CONFIG_COMPAT_KERNEL_2_6_32 endif #CONFIG_CRC7 -ifdef CONFIG_COMPAT_KERNEL_27 +CONFIG_MWIFIEX_SDIO=m + +ifdef CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS_SDIO=n NEED_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_27 +else #CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS_SDIO=m NEED_LIBERTAS=y -endif #CONFIG_COMPAT_KERNEL_27 +endif #CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_IWM=m # CONFIG_IWM_DEBUG=y @@ -513,10 +556,8 @@ CONFIG_IWM=m CONFIG_BT_HCIBTSDIO=m CONFIG_BT_MRVL_SDIO=m -ifneq ($(CONFIG_COMPAT_STAGING),) +ifdef CONFIG_COMPAT_STAGING ifdef CONFIG_WIRELESS_EXT -CONFIG_ATH6KL_CFG80211=y -CONFIG_ATH6KL_DEBUG=y # CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set # CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set # CONFIG_ATH6KL_ENABLE_HOST_DEBUG is not set @@ -527,66 +568,77 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y CONFIG_ATH6K_LEGACY=m -CONFIG_BRCM80211=m -CONFIG_BRCM80211_PCI=y +CONFIG_BRCMFMAC=m endif #CONFIG_WIRELESS_EXT -endif #CONFIG_MMC +endif #CONFIG_COMPAT_STAGING + +endif #CONFIG_MMC -endif # end of SDIO driver list +CONFIG_RTLWIFI=m +CONFIG_RTL8192C_COMMON=m # Common rt2x00 requirements ifeq ($(NEED_RT2X00),y) CONFIG_RT2X00=y CONFIG_RT2X00_LIB=m CONFIG_RT2800_LIB=m -CONFIG_RT2X00_LIB_HT=y CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y -ifdef CONFIG_COMPAT_KERNEL_25 +# CONFIG_RT2X00_LIB_SOC=y +ifdef CONFIG_COMPAT_KERNEL_2_6_25 CONFIG_RT2X00_LIB_LEDS=n -else #CONFIG_COMPAT_KERNEL_25 +else #CONFIG_COMPAT_KERNEL_2_6_25 +ifdef CONFIG_LEDS_CLASS CONFIG_RT2X00_LIB_LEDS=y -endif #CONFIG_COMPAT_KERNEL_25 +endif #CONFIG_LEDS_CLASS +endif #CONFIG_COMPAT_KERNEL_2_6_25 # CONFIG_RT2X00_DEBUG=y # CONFIG_RT2X00_LIB_DEBUGFS endif -ifeq ($(NEED_RT2X00_FIRMWARE),y) -CONFIG_RT2X00_LIB_FIRMWARE=y -endif - # p54 CONFIG_P54_COMMON=m +ifdef CONFIG_MAC80211_LEDS CONFIG_P54_LEDS=y +endif #CONFIG_MAC80211_LEDS # Atheros CONFIG_ATH_COMMON=m CONFIG_ATH_DEBUG=y -CONFIG_WL12XX=y +ifdef CONFIG_COMPAT_STAGING +CONFIG_BRCMUTIL=m +# CONFIG_BRCMDBG=y +endif #CONFIG_COMPAT_STAGING + ifdef CONFIG_CRC7 CONFIG_WL1251=m -CONFIG_WL1271=m +CONFIG_WL12XX=m +CONFIG_WL12XX_HT=y endif #CONFIG_CRC7 -ifdef CONFIG_COMPAT_KERNEL_27 +CONFIG_MWIFIEX=m + +ifdef CONFIG_COMPAT_KERNEL_2_6_27 CONFIG_LIBERTAS=n -else #CONFIG_COMPAT_KERNEL_27 +else #CONFIG_COMPAT_KERNEL_2_6_27 ifeq ($(NEED_LIBERTAS),y) CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS=m CONFIG_LIBERTAS_MESH=y # CONFIG_LIBERTAS_DEBUG=y endif -endif #CONFIG_COMPAT_KERNEL_27 +endif #CONFIG_COMPAT_KERNEL_2_6_27 # We need the backported rfkill module on kernel < 2.6.31. # In more recent kernel versions use the in kernel rfkill module. -ifdef CONFIG_COMPAT_KERNEL_31 +ifdef CONFIG_COMPAT_KERNEL_2_6_31 CONFIG_RFKILL_BACKPORT=m +ifdef CONFIG_LEDS_TRIGGERS CONFIG_RFKILL_BACKPORT_LEDS=y +endif #CONFIG_LEDS_TRIGGERS CONFIG_RFKILL_BACKPORT_INPUT=y -endif #CONFIG_COMPAT_KERNEL_31 +endif #CONFIG_COMPAT_KERNEL_2_6_31 -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
