From: Arend van Spriel <arend@xxxxxxxxxxxx>
The header file bcmsrom_fmt.h contains a lot of macro definitions
used by bcmsrom.c and one type definition used by wlc_phy_int.h.
The defintions have been moved appropriately and the include file
bcmsrom_fmt.h is removed.
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Reviewed-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
---
drivers/staging/brcm80211/brcmsmac/bcmsrom.c | 311 +++++++++++++++++
.../staging/brcm80211/brcmsmac/phy/wlc_phy_int.h | 13 +-
drivers/staging/brcm80211/include/bcmsrom.h | 2 -
drivers/staging/brcm80211/include/bcmsrom_fmt.h | 367 --------------------
4 files changed, 321 insertions(+), 372 deletions(-)
delete mode 100644 drivers/staging/brcm80211/include/bcmsrom_fmt.h
diff --git a/drivers/staging/brcm80211/brcmsmac/bcmsrom.c b/drivers/staging/brcm80211/brcmsmac/bcmsrom.c
index a1a2fc5..d374673 100644
--- a/drivers/staging/brcm80211/brcmsmac/bcmsrom.c
+++ b/drivers/staging/brcm80211/brcmsmac/bcmsrom.c
@@ -41,6 +41,317 @@
#define WRITE_WORD_DELAY 20 /* 20 ms between each word write */
#endif
+/* Maximum srom: 6 Kilobits == 768 bytes */
+#define SROM_MAX 768
+
+/* PCI fields */
+#define PCI_F0DEVID 48
+
+#define SROM_WORDS 64
+
+#define SROM_SSID 2
+
+#define SROM_WL1LHMAXP 29
+
+#define SROM_WL1LPAB0 30
+#define SROM_WL1LPAB1 31
+#define SROM_WL1LPAB2 32
+
+#define SROM_WL1HPAB0 33
+#define SROM_WL1HPAB1 34
+#define SROM_WL1HPAB2 35
+
+#define SROM_MACHI_IL0 36
+#define SROM_MACMID_IL0 37
+#define SROM_MACLO_IL0 38
+#define SROM_MACHI_ET1 42
+#define SROM_MACMID_ET1 43
+#define SROM_MACLO_ET1 44
+#define SROM3_MACHI 37
+#define SROM3_MACMID 38
+#define SROM3_MACLO 39
+
+#define SROM_BXARSSI2G 40
+#define SROM_BXARSSI5G 41
+
+#define SROM_TRI52G 42
+#define SROM_TRI5GHL 43
+
+#define SROM_RXPO52G 45
+
+#define SROM_AABREV 46
+/* Fields in AABREV */
+#define SROM_BR_MASK 0x00ff
+#define SROM_CC_MASK 0x0f00
+#define SROM_CC_SHIFT 8
+#define SROM_AA0_MASK 0x3000
+#define SROM_AA0_SHIFT 12
+#define SROM_AA1_MASK 0xc000
+#define SROM_AA1_SHIFT 14
+
+#define SROM_WL0PAB0 47
+#define SROM_WL0PAB1 48
+#define SROM_WL0PAB2 49
+
+#define SROM_LEDBH10 50
+#define SROM_LEDBH32 51
+
+#define SROM_WL10MAXP 52
+
+#define SROM_WL1PAB0 53
+#define SROM_WL1PAB1 54
+#define SROM_WL1PAB2 55
+
+#define SROM_ITT 56
+
+#define SROM_BFL 57
+#define SROM_BFL2 28
+#define SROM3_BFL2 61
+
+#define SROM_AG10 58
+
+#define SROM_CCODE 59
+
+#define SROM_OPO 60
+
+#define SROM3_LEDDC 62
+
+#define SROM_CRCREV 63
+
+/* SROM Rev 4: Reallocate the software part of the srom to accommodate
+ * MIMO features. It assumes up to two PCIE functions and 440 bytes
+ * of usable srom i.e. the usable storage in chips with OTP that
+ * implements hardware redundancy.
+ */
+
+#define SROM4_WORDS 220
+
+#define SROM4_SIGN 32
+#define SROM4_SIGNATURE 0x5372
+
+#define SROM4_BREV 33
+
+#define SROM4_BFL0 34
+#define SROM4_BFL1 35
+#define SROM4_BFL2 36
+#define SROM4_BFL3 37
+#define SROM5_BFL0 37
+#define SROM5_BFL1 38
+#define SROM5_BFL2 39
+#define SROM5_BFL3 40
+
+#define SROM4_MACHI 38
+#define SROM4_MACMID 39
+#define SROM4_MACLO 40
+#define SROM5_MACHI 41
+#define SROM5_MACMID 42
+#define SROM5_MACLO 43
+
+#define SROM4_CCODE 41
+#define SROM4_REGREV 42
+#define SROM5_CCODE 34
+#define SROM5_REGREV 35
+
+#define SROM4_LEDBH10 43
+#define SROM4_LEDBH32 44
+#define SROM5_LEDBH10 59
+#define SROM5_LEDBH32 60
+
+#define SROM4_LEDDC 45
+#define SROM5_LEDDC 45
+
+#define SROM4_AA 46
+
+#define SROM4_AG10 47
+#define SROM4_AG32 48
+
+#define SROM4_TXPID2G 49
+#define SROM4_TXPID5G 51
+#define SROM4_TXPID5GL 53
+#define SROM4_TXPID5GH 55
+
+#define SROM4_TXRXC 61
+#define SROM4_TXCHAIN_MASK 0x000f
+#define SROM4_TXCHAIN_SHIFT 0
+#define SROM4_RXCHAIN_MASK 0x00f0
+#define SROM4_RXCHAIN_SHIFT 4
+#define SROM4_SWITCH_MASK 0xff00
+#define SROM4_SWITCH_SHIFT 8
+
+/* Per-path fields */
+#define MAX_PATH_SROM 4
+#define SROM4_PATH0 64
+#define SROM4_PATH1 87
+#define SROM4_PATH2 110
+#define SROM4_PATH3 133
+
+#define SROM4_2G_ITT_MAXP 0
+#define SROM4_2G_PA 1
+#define SROM4_5G_ITT_MAXP 5
+#define SROM4_5GLH_MAXP 6
+#define SROM4_5G_PA 7
+#define SROM4_5GL_PA 11
+#define SROM4_5GH_PA 15
+
+/* All the miriad power offsets */
+#define SROM4_2G_CCKPO 156
+#define SROM4_2G_OFDMPO 157
+#define SROM4_5G_OFDMPO 159
+#define SROM4_5GL_OFDMPO 161
+#define SROM4_5GH_OFDMPO 163
+#define SROM4_2G_MCSPO 165
+#define SROM4_5G_MCSPO 173
+#define SROM4_5GL_MCSPO 181
+#define SROM4_5GH_MCSPO 189
+#define SROM4_CDDPO 197
+#define SROM4_STBCPO 198
+#define SROM4_BW40PO 199
+#define SROM4_BWDUPPO 200
+
+#define SROM4_CRCREV 219
+
+/* SROM Rev 8: Make space for a 48word hardware header for PCIe rev >= 6.
+ * This is acombined srom for both MIMO and SISO boards, usable in
+ * the .130 4Kilobit OTP with hardware redundancy.
+ */
+#define SROM8_BREV 65
+
+#define SROM8_BFL0 66
+#define SROM8_BFL1 67
+#define SROM8_BFL2 68
+#define SROM8_BFL3 69
+
+#define SROM8_MACHI 70
+#define SROM8_MACMID 71
+#define SROM8_MACLO 72
+
+#define SROM8_CCODE 73
+#define SROM8_REGREV 74
+
+#define SROM8_LEDBH10 75
+#define SROM8_LEDBH32 76
+
+#define SROM8_LEDDC 77
+
+#define SROM8_AA 78
+
+#define SROM8_AG10 79
+#define SROM8_AG32 80
+
+#define SROM8_TXRXC 81
+
+#define SROM8_BXARSSI2G 82
+#define SROM8_BXARSSI5G 83
+#define SROM8_TRI52G 84
+#define SROM8_TRI5GHL 85
+#define SROM8_RXPO52G 86
+
+#define SROM8_FEM2G 87
+#define SROM8_FEM5G 88
+#define SROM8_FEM_ANTSWLUT_MASK 0xf800
+#define SROM8_FEM_ANTSWLUT_SHIFT 11
+#define SROM8_FEM_TR_ISO_MASK 0x0700
+#define SROM8_FEM_TR_ISO_SHIFT 8
+#define SROM8_FEM_PDET_RANGE_MASK 0x00f8
+#define SROM8_FEM_PDET_RANGE_SHIFT 3
+#define SROM8_FEM_EXTPA_GAIN_MASK 0x0006
+#define SROM8_FEM_EXTPA_GAIN_SHIFT 1
+#define SROM8_FEM_TSSIPOS_MASK 0x0001
+#define SROM8_FEM_TSSIPOS_SHIFT 0
+
+#define SROM8_THERMAL 89
+
+/* Temp sense related entries */
+#define SROM8_MPWR_RAWTS 90
+#define SROM8_TS_SLP_OPT_CORRX 91
+/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
+#define SROM8_FOC_HWIQ_IQSWP 92
+
+/* Temperature delta for PHY calibration */
+#define SROM8_PHYCAL_TEMPDELTA 93
+
+/* Per-path offsets & fields */
+#define SROM8_PATH0 96
+#define SROM8_PATH1 112
+#define SROM8_PATH2 128
+#define SROM8_PATH3 144
+
+#define SROM8_2G_ITT_MAXP 0
+#define SROM8_2G_PA 1
+#define SROM8_5G_ITT_MAXP 4
+#define SROM8_5GLH_MAXP 5
+#define SROM8_5G_PA 6
+#define SROM8_5GL_PA 9
+#define SROM8_5GH_PA 12
+
+/* All the miriad power offsets */
+#define SROM8_2G_CCKPO 160
+
+#define SROM8_2G_OFDMPO 161
+#define SROM8_5G_OFDMPO 163
+#define SROM8_5GL_OFDMPO 165
+#define SROM8_5GH_OFDMPO 167
+
+#define SROM8_2G_MCSPO 169
+#define SROM8_5G_MCSPO 177
+#define SROM8_5GL_MCSPO 185
+#define SROM8_5GH_MCSPO 193
+
+#define SROM8_CDDPO 201
+#define SROM8_STBCPO 202
+#define SROM8_BW40PO 203
+#define SROM8_BWDUPPO 204
+
+/* SISO PA parameters are in the path0 spaces */
+#define SROM8_SISO 96
+
+/* Legacy names for SISO PA paramters */
+#define SROM8_W0_ITTMAXP (SROM8_SISO + SROM8_2G_ITT_MAXP)
+#define SROM8_W0_PAB0 (SROM8_SISO + SROM8_2G_PA)
+#define SROM8_W0_PAB1 (SROM8_SISO + SROM8_2G_PA + 1)
+#define SROM8_W0_PAB2 (SROM8_SISO + SROM8_2G_PA + 2)
+#define SROM8_W1_ITTMAXP (SROM8_SISO + SROM8_5G_ITT_MAXP)
+#define SROM8_W1_MAXP_LCHC (SROM8_SISO + SROM8_5GLH_MAXP)
+#define SROM8_W1_PAB0 (SROM8_SISO + SROM8_5G_PA)
+#define SROM8_W1_PAB1 (SROM8_SISO + SROM8_5G_PA + 1)
+#define SROM8_W1_PAB2 (SROM8_SISO + SROM8_5G_PA + 2)
+#define SROM8_W1_PAB0_LC (SROM8_SISO + SROM8_5GL_PA)
+#define SROM8_W1_PAB1_LC (SROM8_SISO + SROM8_5GL_PA + 1)
+#define SROM8_W1_PAB2_LC (SROM8_SISO + SROM8_5GL_PA + 2)
+#define SROM8_W1_PAB0_HC (SROM8_SISO + SROM8_5GH_PA)
+#define SROM8_W1_PAB1_HC (SROM8_SISO + SROM8_5GH_PA + 1)
+#define SROM8_W1_PAB2_HC (SROM8_SISO + SROM8_5GH_PA + 2)
+
+/* SROM REV 9 */
+#define SROM9_2GPO_CCKBW20 160
+#define SROM9_2GPO_CCKBW20UL 161
+#define SROM9_2GPO_LOFDMBW20 162
+#define SROM9_2GPO_LOFDMBW20UL 164
+
+#define SROM9_5GLPO_LOFDMBW20 166
+#define SROM9_5GLPO_LOFDMBW20UL 168
+#define SROM9_5GMPO_LOFDMBW20 170
+#define SROM9_5GMPO_LOFDMBW20UL 172
+#define SROM9_5GHPO_LOFDMBW20 174
+#define SROM9_5GHPO_LOFDMBW20UL 176
+
+#define SROM9_2GPO_MCSBW20 178
+#define SROM9_2GPO_MCSBW20UL 180
+#define SROM9_2GPO_MCSBW40 182
+
+#define SROM9_5GLPO_MCSBW20 184
+#define SROM9_5GLPO_MCSBW20UL 186
+#define SROM9_5GLPO_MCSBW40 188
+#define SROM9_5GMPO_MCSBW20 190
+#define SROM9_5GMPO_MCSBW20UL 192
+#define SROM9_5GMPO_MCSBW40 194
+#define SROM9_5GHPO_MCSBW20 196
+#define SROM9_5GHPO_MCSBW20UL 198
+#define SROM9_5GHPO_MCSBW40 200
+
+#define SROM9_PO_MCS32 202
+#define SROM9_PO_LOFDM40DUP 203
+
/* SROM flags (see sromvar_t) */
#define SRFL_MORE 1 /* value continues as described by the next entry */
#define SRFL_NOFFS 2 /* value bits can't be all one's */
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_int.h b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_int.h
index 10cbf52..8e7fb94 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_int.h
+++ b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_int.h
@@ -21,7 +21,6 @@
#include <bcmdefs.h>
#include <bcmutils.h>
-#include <bcmsrom_fmt.h>
#include <wlc_phy_hal.h>
#define PHYHAL_ERROR 0x0001
@@ -42,6 +41,14 @@ extern u32 phyhal_msg_level;
#define LCNXN_BASEREV 16
+typedef struct {
+ u8 tssipos; /* TSSI positive slope, 1: positive, 0: negative */
+ u8 extpagain; /* Ext PA gain-type: full-gain: 0, pa-lite: 1, no_pa: 2 */
+ u8 pdetrange; /* support 32 combinations of different Pdet dynamic ranges */
+ u8 triso; /* TR switch isolation */
+ u8 antswctrllut; /* antswctrl lookup table configuration: 32 possible choices */
+} wlc_phy_srom_fem_t;
+
struct wlc_hw_info;
typedef struct phy_info phy_info_t;
typedef void (*initfn_t) (phy_info_t *);
@@ -653,8 +660,8 @@ struct phy_info {
s8 tx_power_offset[TXP_NUM_RATES];
u8 tx_power_target[TXP_NUM_RATES];
- srom_fem_t srom_fem2g;
- srom_fem_t srom_fem5g;
+ wlc_phy_srom_fem_t srom_fem2g;
+ wlc_phy_srom_fem_t srom_fem5g;
u8 tx_power_max;
u8 tx_power_max_rate_ind;
diff --git a/drivers/staging/brcm80211/include/bcmsrom.h b/drivers/staging/brcm80211/include/bcmsrom.h
index b2dc895..b9500ec 100644
--- a/drivers/staging/brcm80211/include/bcmsrom.h
+++ b/drivers/staging/brcm80211/include/bcmsrom.h
@@ -17,8 +17,6 @@
#ifndef _bcmsrom_h_
#define _bcmsrom_h_
-#include <bcmsrom_fmt.h>
-
/* Prototypes */
extern int srom_var_init(si_t *sih, uint bus, void *curmap,
char **vars, uint *count);
diff --git a/drivers/staging/brcm80211/include/bcmsrom_fmt.h b/drivers/staging/brcm80211/include/bcmsrom_fmt.h
deleted file mode 100644
index 4666afd..0000000
--- a/drivers/staging/brcm80211/include/bcmsrom_fmt.h
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _bcmsrom_fmt_h_
-#define _bcmsrom_fmt_h_
-
-/* Maximum srom: 6 Kilobits == 768 bytes */
-#define SROM_MAX 768
-#define SROM_MAXW 384
-#define VARS_MAX 4096
-
-/* PCI fields */
-#define PCI_F0DEVID 48
-
-#define SROM_WORDS 64
-
-#define SROM3_SWRGN_OFF 28 /* s/w region offset in words */
-
-#define SROM_SSID 2
-
-#define SROM_WL1LHMAXP 29
-
-#define SROM_WL1LPAB0 30
-#define SROM_WL1LPAB1 31
-#define SROM_WL1LPAB2 32
-
-#define SROM_WL1HPAB0 33
-#define SROM_WL1HPAB1 34
-#define SROM_WL1HPAB2 35
-
-#define SROM_MACHI_IL0 36
-#define SROM_MACMID_IL0 37
-#define SROM_MACLO_IL0 38
-#define SROM_MACHI_ET0 39
-#define SROM_MACMID_ET0 40
-#define SROM_MACLO_ET0 41
-#define SROM_MACHI_ET1 42
-#define SROM_MACMID_ET1 43
-#define SROM_MACLO_ET1 44
-#define SROM3_MACHI 37
-#define SROM3_MACMID 38
-#define SROM3_MACLO 39
-
-#define SROM_BXARSSI2G 40
-#define SROM_BXARSSI5G 41
-
-#define SROM_TRI52G 42
-#define SROM_TRI5GHL 43
-
-#define SROM_RXPO52G 45
-
-#define SROM2_ENETPHY 45
-
-#define SROM_AABREV 46
-/* Fields in AABREV */
-#define SROM_BR_MASK 0x00ff
-#define SROM_CC_MASK 0x0f00
-#define SROM_CC_SHIFT 8
-#define SROM_AA0_MASK 0x3000
-#define SROM_AA0_SHIFT 12
-#define SROM_AA1_MASK 0xc000
-#define SROM_AA1_SHIFT 14
-
-#define SROM_WL0PAB0 47
-#define SROM_WL0PAB1 48
-#define SROM_WL0PAB2 49
-
-#define SROM_LEDBH10 50
-#define SROM_LEDBH32 51
-
-#define SROM_WL10MAXP 52
-
-#define SROM_WL1PAB0 53
-#define SROM_WL1PAB1 54
-#define SROM_WL1PAB2 55
-
-#define SROM_ITT 56
-
-#define SROM_BFL 57
-#define SROM_BFL2 28
-#define SROM3_BFL2 61
-
-#define SROM_AG10 58
-
-#define SROM_CCODE 59
-
-#define SROM_OPO 60
-
-#define SROM3_LEDDC 62
-
-#define SROM_CRCREV 63
-
-/* SROM Rev 4: Reallocate the software part of the srom to accommodate
- * MIMO features. It assumes up to two PCIE functions and 440 bytes
- * of usable srom i.e. the usable storage in chips with OTP that
- * implements hardware redundancy.
- */
-
-#define SROM4_WORDS 220
-
-#define SROM4_SIGN 32
-#define SROM4_SIGNATURE 0x5372
-
-#define SROM4_BREV 33
-
-#define SROM4_BFL0 34
-#define SROM4_BFL1 35
-#define SROM4_BFL2 36
-#define SROM4_BFL3 37
-#define SROM5_BFL0 37
-#define SROM5_BFL1 38
-#define SROM5_BFL2 39
-#define SROM5_BFL3 40
-
-#define SROM4_MACHI 38
-#define SROM4_MACMID 39
-#define SROM4_MACLO 40
-#define SROM5_MACHI 41
-#define SROM5_MACMID 42
-#define SROM5_MACLO 43
-
-#define SROM4_CCODE 41
-#define SROM4_REGREV 42
-#define SROM5_CCODE 34
-#define SROM5_REGREV 35
-
-#define SROM4_LEDBH10 43
-#define SROM4_LEDBH32 44
-#define SROM5_LEDBH10 59
-#define SROM5_LEDBH32 60
-
-#define SROM4_LEDDC 45
-#define SROM5_LEDDC 45
-
-#define SROM4_AA 46
-#define SROM4_AA2G_MASK 0x00ff
-#define SROM4_AA2G_SHIFT 0
-#define SROM4_AA5G_MASK 0xff00
-#define SROM4_AA5G_SHIFT 8
-
-#define SROM4_AG10 47
-#define SROM4_AG32 48
-
-#define SROM4_TXPID2G 49
-#define SROM4_TXPID5G 51
-#define SROM4_TXPID5GL 53
-#define SROM4_TXPID5GH 55
-
-#define SROM4_TXRXC 61
-#define SROM4_TXCHAIN_MASK 0x000f
-#define SROM4_TXCHAIN_SHIFT 0
-#define SROM4_RXCHAIN_MASK 0x00f0
-#define SROM4_RXCHAIN_SHIFT 4
-#define SROM4_SWITCH_MASK 0xff00
-#define SROM4_SWITCH_SHIFT 8
-
-/* Per-path fields */
-#define MAX_PATH_SROM 4
-#define SROM4_PATH0 64
-#define SROM4_PATH1 87
-#define SROM4_PATH2 110
-#define SROM4_PATH3 133
-
-#define SROM4_2G_ITT_MAXP 0
-#define SROM4_2G_PA 1
-#define SROM4_5G_ITT_MAXP 5
-#define SROM4_5GLH_MAXP 6
-#define SROM4_5G_PA 7
-#define SROM4_5GL_PA 11
-#define SROM4_5GH_PA 15
-
-/* Fields in the ITT_MAXP and 5GLH_MAXP words */
-#define B2G_MAXP_MASK 0xff
-#define B2G_ITT_SHIFT 8
-#define B5G_MAXP_MASK 0xff
-#define B5G_ITT_SHIFT 8
-#define B5GH_MAXP_MASK 0xff
-#define B5GL_MAXP_SHIFT 8
-
-/* All the miriad power offsets */
-#define SROM4_2G_CCKPO 156
-#define SROM4_2G_OFDMPO 157
-#define SROM4_5G_OFDMPO 159
-#define SROM4_5GL_OFDMPO 161
-#define SROM4_5GH_OFDMPO 163
-#define SROM4_2G_MCSPO 165
-#define SROM4_5G_MCSPO 173
-#define SROM4_5GL_MCSPO 181
-#define SROM4_5GH_MCSPO 189
-#define SROM4_CDDPO 197
-#define SROM4_STBCPO 198
-#define SROM4_BW40PO 199
-#define SROM4_BWDUPPO 200
-
-#define SROM4_CRCREV 219
-
-/* SROM Rev 8: Make space for a 48word hardware header for PCIe rev >= 6.
- * This is acombined srom for both MIMO and SISO boards, usable in
- * the .130 4Kilobit OTP with hardware redundancy.
- */
-
-#define SROM8_SIGN 64
-
-#define SROM8_BREV 65
-
-#define SROM8_BFL0 66
-#define SROM8_BFL1 67
-#define SROM8_BFL2 68
-#define SROM8_BFL3 69
-
-#define SROM8_MACHI 70
-#define SROM8_MACMID 71
-#define SROM8_MACLO 72
-
-#define SROM8_CCODE 73
-#define SROM8_REGREV 74
-
-#define SROM8_LEDBH10 75
-#define SROM8_LEDBH32 76
-
-#define SROM8_LEDDC 77
-
-#define SROM8_AA 78
-
-#define SROM8_AG10 79
-#define SROM8_AG32 80
-
-#define SROM8_TXRXC 81
-
-#define SROM8_BXARSSI2G 82
-#define SROM8_BXARSSI5G 83
-#define SROM8_TRI52G 84
-#define SROM8_TRI5GHL 85
-#define SROM8_RXPO52G 86
-
-#define SROM8_FEM2G 87
-#define SROM8_FEM5G 88
-#define SROM8_FEM_ANTSWLUT_MASK 0xf800
-#define SROM8_FEM_ANTSWLUT_SHIFT 11
-#define SROM8_FEM_TR_ISO_MASK 0x0700
-#define SROM8_FEM_TR_ISO_SHIFT 8
-#define SROM8_FEM_PDET_RANGE_MASK 0x00f8
-#define SROM8_FEM_PDET_RANGE_SHIFT 3
-#define SROM8_FEM_EXTPA_GAIN_MASK 0x0006
-#define SROM8_FEM_EXTPA_GAIN_SHIFT 1
-#define SROM8_FEM_TSSIPOS_MASK 0x0001
-#define SROM8_FEM_TSSIPOS_SHIFT 0
-
-#define SROM8_THERMAL 89
-
-/* Temp sense related entries */
-#define SROM8_MPWR_RAWTS 90
-#define SROM8_TS_SLP_OPT_CORRX 91
-/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
-#define SROM8_FOC_HWIQ_IQSWP 92
-
-/* Temperature delta for PHY calibration */
-#define SROM8_PHYCAL_TEMPDELTA 93
-
-/* Per-path offsets & fields */
-#define SROM8_PATH0 96
-#define SROM8_PATH1 112
-#define SROM8_PATH2 128
-#define SROM8_PATH3 144
-
-#define SROM8_2G_ITT_MAXP 0
-#define SROM8_2G_PA 1
-#define SROM8_5G_ITT_MAXP 4
-#define SROM8_5GLH_MAXP 5
-#define SROM8_5G_PA 6
-#define SROM8_5GL_PA 9
-#define SROM8_5GH_PA 12
-
-/* All the miriad power offsets */
-#define SROM8_2G_CCKPO 160
-
-#define SROM8_2G_OFDMPO 161
-#define SROM8_5G_OFDMPO 163
-#define SROM8_5GL_OFDMPO 165
-#define SROM8_5GH_OFDMPO 167
-
-#define SROM8_2G_MCSPO 169
-#define SROM8_5G_MCSPO 177
-#define SROM8_5GL_MCSPO 185
-#define SROM8_5GH_MCSPO 193
-
-#define SROM8_CDDPO 201
-#define SROM8_STBCPO 202
-#define SROM8_BW40PO 203
-#define SROM8_BWDUPPO 204
-
-/* SISO PA parameters are in the path0 spaces */
-#define SROM8_SISO 96
-
-/* Legacy names for SISO PA paramters */
-#define SROM8_W0_ITTMAXP (SROM8_SISO + SROM8_2G_ITT_MAXP)
-#define SROM8_W0_PAB0 (SROM8_SISO + SROM8_2G_PA)
-#define SROM8_W0_PAB1 (SROM8_SISO + SROM8_2G_PA + 1)
-#define SROM8_W0_PAB2 (SROM8_SISO + SROM8_2G_PA + 2)
-#define SROM8_W1_ITTMAXP (SROM8_SISO + SROM8_5G_ITT_MAXP)
-#define SROM8_W1_MAXP_LCHC (SROM8_SISO + SROM8_5GLH_MAXP)
-#define SROM8_W1_PAB0 (SROM8_SISO + SROM8_5G_PA)
-#define SROM8_W1_PAB1 (SROM8_SISO + SROM8_5G_PA + 1)
-#define SROM8_W1_PAB2 (SROM8_SISO + SROM8_5G_PA + 2)
-#define SROM8_W1_PAB0_LC (SROM8_SISO + SROM8_5GL_PA)
-#define SROM8_W1_PAB1_LC (SROM8_SISO + SROM8_5GL_PA + 1)
-#define SROM8_W1_PAB2_LC (SROM8_SISO + SROM8_5GL_PA + 2)
-#define SROM8_W1_PAB0_HC (SROM8_SISO + SROM8_5GH_PA)
-#define SROM8_W1_PAB1_HC (SROM8_SISO + SROM8_5GH_PA + 1)
-#define SROM8_W1_PAB2_HC (SROM8_SISO + SROM8_5GH_PA + 2)
-
-#define SROM8_CRCREV 219
-
-/* SROM REV 9 */
-#define SROM9_2GPO_CCKBW20 160
-#define SROM9_2GPO_CCKBW20UL 161
-#define SROM9_2GPO_LOFDMBW20 162
-#define SROM9_2GPO_LOFDMBW20UL 164
-
-#define SROM9_5GLPO_LOFDMBW20 166
-#define SROM9_5GLPO_LOFDMBW20UL 168
-#define SROM9_5GMPO_LOFDMBW20 170
-#define SROM9_5GMPO_LOFDMBW20UL 172
-#define SROM9_5GHPO_LOFDMBW20 174
-#define SROM9_5GHPO_LOFDMBW20UL 176
-
-#define SROM9_2GPO_MCSBW20 178
-#define SROM9_2GPO_MCSBW20UL 180
-#define SROM9_2GPO_MCSBW40 182
-
-#define SROM9_5GLPO_MCSBW20 184
-#define SROM9_5GLPO_MCSBW20UL 186
-#define SROM9_5GLPO_MCSBW40 188
-#define SROM9_5GMPO_MCSBW20 190
-#define SROM9_5GMPO_MCSBW20UL 192
-#define SROM9_5GMPO_MCSBW40 194
-#define SROM9_5GHPO_MCSBW20 196
-#define SROM9_5GHPO_MCSBW20UL 198
-#define SROM9_5GHPO_MCSBW40 200
-
-#define SROM9_PO_MCS32 202
-#define SROM9_PO_LOFDM40DUP 203
-
-#define SROM9_REV_CRC 219
-
-typedef struct {
- u8 tssipos; /* TSSI positive slope, 1: positive, 0: negative */
- u8 extpagain; /* Ext PA gain-type: full-gain: 0, pa-lite: 1, no_pa: 2 */
- u8 pdetrange; /* support 32 combinations of different Pdet dynamic ranges */
- u8 triso; /* TR switch isolation */
- u8 antswctrllut; /* antswctrl lookup table configuration: 32 possible choices */
-} srom_fem_t;
-
-#endif /* _bcmsrom_fmt_h_ */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
