On 05/31/2011 04:37 AM, Andreas Schwab wrote:
RafaÅ MiÅecki<zajec5-Re5JQEeQqe8AvxtiuMwx3w@xxxxxxxxxxxxxxxx> writes:+/************************************************** + * Workarounds. + **************************************************/ + +static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) +{ + return (ssb_pcie_read(pc, 0x204)& 0x10) ? 0xC0 : 0x80; +} + +static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) +{ + const u8 serdes_pll_device = 0x1D; + const u8 serdes_rx_device = 0x1F; + u16 tmp; + + ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, + ssb_pcicore_polarity_workaround(pc)); + tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); + if (tmp& 0x4000) + ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp& ~0x4000); +}b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) Machine check in kernel mode. Caused by (from SRR1=149030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] PowerMac Modules linked in: crc_itu_t ssb(+) snd_aoa_soundbus sungem sungem_phy NIP: c0013324 LR: f2143e84 CTR: c001331c REGS: c2ca5b80 TRAP: 0200 Not tainted (3.0.0-rc1) MSR: 00149030<EE,ME,IR,DR> CR: 22004422 XER: 20000000 TASK = ef9cef90[285] 'modprobe' THREAD: c2ca4000 GPR00: c2d1f87c c2ca5c30 ef9cef90 00002381 00000134 00000204 00000080 c2ca5bc8 GPR08: 04773e80 c2d1f87c 00000000 c001331c ffffffff 1002833c f2141968 f214821c GPR16: f21478b7 f2148250 f21478c0 f2147894 00100100 00200200 00001310 c2d1fb2c GPR24: f2147ee8 00000000 00000000 00000000 f2148204 c2d1f800 00000134 c2d1f800 NIP [c0013324] ioread32+0x8/0x14 LR [f2143e84] ssb_pci_read32+0x4c/0x5c [ssb] Call Trace: [c2ca5c30] [c2d1f800] 0xc2d1f800 (unreliable) [c2ca5c40] [f2146244] ssb_pcie_read+0x4c/0x54 [ssb] [c2ca5c50] [f2146440] ssb_pcicore_serdes_workaround+0x1c/0x170 [ssb] [c2ca5c70] [f2141c24] ssb_attach_queued_buses+0x94/0x288 [ssb] [c2ca5cd0] [f2142078] ssb_bus_register+0xe4/0x160 [ssb] [c2ca5cf0] [f2142134] ssb_bus_pcibus_register+0x40/0x80 [ssb] [c2ca5d00] [f2144a60] ssb_pcihost_probe+0xd8/0x114 [ssb] [c2ca5d30] [c018f6ac] local_pci_probe+0x28/0x38 [c2ca5d40] [c0190690] pci_device_probe+0x68/0x94 [c2ca5d70] [c02bc8a4] driver_probe_device+0xc8/0x170 [c2ca5d90] [c02bc9bc] __driver_attach+0x70/0x98 [c2ca5db0] [c02bb9ec] bus_for_each_dev+0x60/0x90 [c2ca5de0] [c02bc538] driver_attach+0x24/0x34 [c2ca5df0] [c02bc11c] bus_add_driver+0xbc/0x23c [c2ca5e10] [c02bcfc8] driver_register+0xb8/0x144 [c2ca5e30] [c01908c8] __pci_register_driver+0x4c/0xc8 [c2ca5e50] [f214486c] ssb_pcihost_register+0x50/0x60 [ssb] [c2ca5e60] [f214c094] b43_pci_ssb_bridge_init+0x18/0xbc [ssb] [c2ca5e70] [f214c05c] ssb_modinit+0x5c/0x7c [ssb] [c2ca5e80] [c00049d8] do_one_initcall+0xe0/0x1c0 [c2ca5eb0] [c005f7b0] sys_init_module+0x164c/0x1850 [c2ca5f40] [c0010cd8] ret_from_syscall+0x0/0x40 --- Exception: c01 at 0xff0b714 LR = 0x100050f0 Instruction dump: 0c030000 4c00012c 5463043e 4e800020 7c0004ac a0630000 0c030000 4c00012c 5463043e 4e800020 7c0004ac 7c601c2c<0c030000> 4c00012c 4e800020 7c0004ac ---[ end trace 9824f03a7724930b ]---
We get a PPC machine check if we try to read a non-existent register, whereas x86 returns all 1's on reads.
Obviously, this section needs to be conditionalized depending on revision info. From the traceback, it must be the serdes_pll_device read that failed. The specs say that should be a valid register for PCIe and PCI core rev 3 - 5. As the PCI core in this device is 0xc, should we be in this routine? See http://bcm-v4.sipsolutions.net/PCI-E.
Larry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
