On Mon, May 23, 2011 at 2:52 PM, Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote: > On 05/23/2011 11:39 AM, Ben Greear wrote: >> >> On 05/23/2011 09:54 AM, Ben Greear wrote: >>> >>> On 05/23/2011 04:28 AM, Mohammed Shafi wrote: >>>> >>>> On Sat, May 21, 2011 at 3:52 AM, Ben Greear<greearb@xxxxxxxxxxxxxxx> >>>> wrote: >>>>> >>>>> This is on 2.6.39-wl+ >>>>> >>>>> All the 5Ghz channels are showing as passive scanning, which >>>>> makes them unusable for APs if nothing else. >>>> >>>> for me channels 36,40,44,48 are ok in 5ghz. used the latest >>>> wireless-testing just brought the card up as station mode. >>> >>> Most of my systems show the same, at least most of the time. >>> >>> >>>>> Any idea why this is happening? >>>> >>>> don't know, may be regulatory. >>> >>> After a reboot and an idle weekend, mine also look normal. >>> So, it's something transient it appears. >> >> Err, I mis-spoke..the 9380 system still shows passive >> scanning everywhere... > > Busted one: > > ath: EEPROM regdomain: 0x6a > ath: EEPROM indicates we should expect a direct regpair map > ath: Country alpha2 being used: 00 > ath: Regpair used: 0x6a > > cfg80211: Calling CRDA for country: US > cfg80211: Regulatory domain changed to country: US > cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, > max_eirp) > cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) > cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) > cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) > > > Bleh, seems my Sparklan 127 NIC is set to world-roam :( > > What a total pain in the arse! > Ben > > -- > Ben Greear <greearb@xxxxxxxxxxxxxxx> > Candela Technologies Inc http://www.candelatech.com Strange. This is what I get out of my WPEA-127N: ath: EEPROM regdomain: 0x0 ath: EEPROM indicates default country code should be used ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x3a ath: Country alpha2 being used: US ath: Regpair used: 0x3a Here's how my 5GHz channels look: Frequencies: * 5180 MHz [36] (17.0 dBm) * 5200 MHz [40] (17.0 dBm) * 5220 MHz [44] (17.0 dBm) * 5240 MHz [48] (17.0 dBm) * 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5500 MHz [100] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5520 MHz [104] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5540 MHz [108] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5560 MHz [112] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5580 MHz [116] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5680 MHz [136] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5700 MHz [140] (20.0 dBm) (passive scanning, no IBSS, radar detection) * 5745 MHz [149] (30.0 dBm) * 5765 MHz [153] (30.0 dBm) * 5785 MHz [157] (30.0 dBm) * 5805 MHz [161] (30.0 dBm) * 5825 MHz [165] (30.0 dBm) This is running 2.6.37 with compat-wireless from sometime in March, probably. I'll try with 2.6.39 and latest compat-wireless when I get a chance. -Brian -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
