Several function in nvram.c take a pointer value which is not
actually used. These are removed and the header file contained
some other prototypes that were not implemented. As this source
file was the only one using the header file siutils.h it has been
removed.
Cc: devel@xxxxxxxxxxxxxxxxxxxxxx
Cc: linux-wireless@xxxxxxxxxxxxxxx
Reviewed-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Henry Ptasinski <henryp@xxxxxxxxxxxx>
Reviewed-by: Brett Rudley <brudley@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/staging/brcm80211/brcmsmac/aiutils.c | 4 +-
drivers/staging/brcm80211/brcmsmac/nvram.c | 13 +-
drivers/staging/brcm80211/include/bcmnvram.h | 25 +--
drivers/staging/brcm80211/include/siutils.h | 361 --------------------------
4 files changed, 10 insertions(+), 393 deletions(-)
delete mode 100644 drivers/staging/brcm80211/include/siutils.h
diff --git a/drivers/staging/brcm80211/brcmsmac/aiutils.c b/drivers/staging/brcm80211/brcmsmac/aiutils.c
index 3d7a2d6..a61185f 100644
--- a/drivers/staging/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/staging/brcm80211/brcmsmac/aiutils.c
@@ -860,7 +860,7 @@ static si_info_t *ai_doattach(si_info_t *sii, uint devid,
}
/* Init nvram from flash if it exists */
- nvram_init((void *)&(sii->pub));
+ nvram_init();
/* Init nvram from sprom/otp if they exist */
if (srom_var_init
@@ -970,7 +970,7 @@ void ai_detach(si_t *sih)
sii->regs[idx] = NULL;
}
- nvram_exit((void *)si_local); /* free up nvram buffers */
+ nvram_exit(); /* free up nvram buffers */
if (sih->bustype == PCI_BUS) {
if (sii->pch)
diff --git a/drivers/staging/brcm80211/brcmsmac/nvram.c b/drivers/staging/brcm80211/brcmsmac/nvram.c
index 830e30f..085ec0b 100644
--- a/drivers/staging/brcm80211/brcmsmac/nvram.c
+++ b/drivers/staging/brcm80211/brcmsmac/nvram.c
@@ -18,10 +18,8 @@
#include <linux/string.h>
#include <bcmdefs.h>
#include <bcmutils.h>
-#include <siutils.h>
#include <bcmnvram.h>
#include <sbchipc.h>
-#include <bcmsrom.h>
#include <bcmdevs.h>
#include <hndsoc.h>
@@ -42,7 +40,7 @@ static vars_t *vars;
static char *findvar(char *vars, char *lim, const char *name);
-int nvram_init(void *si)
+int nvram_init(void)
{
/* Make sure we read nvram in flash just once before freeing the memory */
@@ -53,7 +51,7 @@ int nvram_init(void *si)
return 0;
}
-int nvram_append(void *si, char *varlst, uint varsz)
+int nvram_append(char *varlst, uint varsz)
{
uint bufsz = VARS_T_OH;
vars_t *new;
@@ -71,14 +69,11 @@ int nvram_append(void *si, char *varlst, uint varsz)
return 0;
}
-void nvram_exit(void *si)
+void nvram_exit(void)
{
vars_t *this, *next;
- si_t *sih;
- sih = (si_t *) si;
this = vars;
-
if (this)
kfree(this->vars);
@@ -175,7 +170,7 @@ int nvram_unset(const char *name)
return 0;
}
-int nvram_reset(void *si)
+int nvram_reset(void)
{
return 0;
}
diff --git a/drivers/staging/brcm80211/include/bcmnvram.h b/drivers/staging/brcm80211/include/bcmnvram.h
index e58151c..12645dd 100644
--- a/drivers/staging/brcm80211/include/bcmnvram.h
+++ b/drivers/staging/brcm80211/include/bcmnvram.h
@@ -30,31 +30,26 @@ struct nvram_header {
};
/*
- * Get default value for an NVRAM variable
- */
-extern char *nvram_default_get(const char *name);
-
-/*
* Initialize NVRAM access. May be unnecessary or undefined on certain
* platforms.
*/
-extern int nvram_init(void *sih);
+extern int nvram_init(void);
/*
* Append a chunk of nvram variables to the global list
*/
-extern int nvram_append(void *si, char *vars, uint varsz);
+extern int nvram_append(char *vars, uint varsz);
/*
* Check for reset button press for restoring factory defaults.
*/
-extern int nvram_reset(void *sih);
+extern int nvram_reset(void);
/*
* Disable NVRAM access. May be unnecessary or undefined on certain
* platforms.
*/
-extern void nvram_exit(void *sih);
+extern void nvram_exit(void);
/*
* Get the value of an NVRAM variable. The pointer returned may be
@@ -65,12 +60,6 @@ extern void nvram_exit(void *sih);
extern char *nvram_get(const char *name);
/*
- * Read the reset GPIO value from the nvram and set the GPIO
- * as input
- */
-extern int nvram_resetgpio_init(void *sih);
-
-/*
* Get the value of an NVRAM variable.
* @param name name of variable to get
* @return value of variable or NUL if undefined
@@ -139,12 +128,6 @@ extern int nvram_commit(void);
*/
extern int nvram_getall(char *nvram_buf, int count);
-/*
- * returns the crc value of the nvram
- * @param nvh nvram header pointer
- */
-u8 nvram_calc_crc(struct nvram_header *nvh);
-
#endif /* _LANGUAGE_ASSEMBLY */
/* variable access */
diff --git a/drivers/staging/brcm80211/include/siutils.h b/drivers/staging/brcm80211/include/siutils.h
deleted file mode 100644
index 101e9a4..0000000
--- a/drivers/staging/brcm80211/include/siutils.h
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _siutils_h_
-#define _siutils_h_
-
-#include <hndsoc.h>
-
-/*
- * Data structure to export all chip specific common variables
- * public (read-only) portion of siutils handle returned by si_attach()
- */
-struct si_pub {
- uint socitype; /* SOCI_SB, SOCI_AI */
-
- uint bustype; /* SI_BUS, PCI_BUS */
- uint buscoretype; /* PCI_CORE_ID, PCIE_CORE_ID, PCMCIA_CORE_ID */
- uint buscorerev; /* buscore rev */
- uint buscoreidx; /* buscore index */
- int ccrev; /* chip common core rev */
- u32 cccaps; /* chip common capabilities */
- u32 cccaps_ext; /* chip common capabilities extension */
- int pmurev; /* pmu core rev */
- u32 pmucaps; /* pmu capabilities */
- uint boardtype; /* board type */
- uint boardvendor; /* board vendor */
- uint boardflags; /* board flags */
- uint boardflags2; /* board flags2 */
- uint chip; /* chip number */
- uint chiprev; /* chip revision */
- uint chippkg; /* chip package option */
- u32 chipst; /* chip status */
- bool issim; /* chip is in simulation or emulation */
- uint socirev; /* SOC interconnect rev */
- bool pci_pr32414;
-
-};
-
-/* for HIGH_ONLY driver, the si_t must be writable to allow states sync from BMAC to HIGH driver
- * for monolithic driver, it is readonly to prevent accident change
- */
-typedef const struct si_pub si_t;
-
-/*
- * Many of the routines below take an 'sih' handle as their first arg.
- * Allocate this by calling si_attach(). Free it by calling si_detach().
- * At any one time, the sih is logically focused on one particular si core
- * (the "current core").
- * Use si_setcore() or si_setcoreidx() to change the association to another core.
- */
-
-#define BADIDX (SI_MAXCORES + 1)
-
-/* clkctl xtal what flags */
-#define XTAL 0x1 /* primary crystal oscillator (2050) */
-#define PLL 0x2 /* main chip pll */
-
-/* clkctl clk mode */
-#define CLK_FAST 0 /* force fast (pll) clock */
-#define CLK_DYNAMIC 2 /* enable dynamic clock control */
-
-/* GPIO usage priorities */
-#define GPIO_DRV_PRIORITY 0 /* Driver */
-#define GPIO_APP_PRIORITY 1 /* Application */
-#define GPIO_HI_PRIORITY 2 /* Highest priority. Ignore GPIO reservation */
-
-/* GPIO pull up/down */
-#define GPIO_PULLUP 0
-#define GPIO_PULLDN 1
-
-/* GPIO event regtype */
-#define GPIO_REGEVT 0 /* GPIO register event */
-#define GPIO_REGEVT_INTMSK 1 /* GPIO register event int mask */
-#define GPIO_REGEVT_INTPOL 2 /* GPIO register event int polarity */
-
-/* device path */
-#define SI_DEVPATH_BUFSZ 16 /* min buffer size in bytes */
-
-/* SI routine enumeration: to be used by update function with multiple hooks */
-#define SI_DOATTACH 1
-#define SI_PCIDOWN 2
-#define SI_PCIUP 3
-
-#define ISSIM_ENAB(sih) 0
-
-/* PMU clock/power control */
-#if defined(BCMPMUCTL)
-#define PMUCTL_ENAB(sih) (BCMPMUCTL)
-#else
-#define PMUCTL_ENAB(sih) ((sih)->cccaps & CC_CAP_PMU)
-#endif
-
-/* chipcommon clock/power control (exclusive with PMU's) */
-#if defined(BCMPMUCTL) && BCMPMUCTL
-#define CCCTL_ENAB(sih) (0)
-#define CCPLL_ENAB(sih) (0)
-#else
-#define CCCTL_ENAB(sih) ((sih)->cccaps & CC_CAP_PWR_CTL)
-#define CCPLL_ENAB(sih) ((sih)->cccaps & CC_CAP_PLL_MASK)
-#endif
-
-typedef void (*gpio_handler_t) (u32 stat, void *arg);
-
-/* External PA enable mask */
-#define GPIO_CTRL_EPA_EN_MASK 0x40
-
-/* === exported functions === */
-extern si_t *si_attach(uint pcidev, void *regs, uint bustype,
- void *sdh, char **vars, uint *varsz);
-
-extern void si_detach(si_t *sih);
-extern bool si_pci_war16165(si_t *sih);
-
-extern uint si_coreid(si_t *sih);
-extern uint si_flag(si_t *sih);
-extern uint si_coreidx(si_t *sih);
-extern uint si_corerev(si_t *sih);
-extern uint si_corereg(si_t *sih, uint coreidx, uint regoff, uint mask,
- uint val);
-extern void si_write_wrapperreg(si_t *sih, u32 offset, u32 val);
-extern u32 si_core_cflags(si_t *sih, u32 mask, u32 val);
-extern u32 si_core_sflags(si_t *sih, u32 mask, u32 val);
-extern bool si_iscoreup(si_t *sih);
-extern uint si_findcoreidx(si_t *sih, uint coreid, uint coreunit);
-#ifndef BCMSDIO
-extern void *si_setcoreidx(si_t *sih, uint coreidx);
-#endif
-extern void *si_setcore(si_t *sih, uint coreid, uint coreunit);
-extern void *si_switch_core(si_t *sih, uint coreid, uint *origidx,
- uint *intr_val);
-extern void si_restore_core(si_t *sih, uint coreid, uint intr_val);
-extern void si_core_reset(si_t *sih, u32 bits, u32 resetbits);
-extern void si_core_disable(si_t *sih, u32 bits);
-extern u32 si_alp_clock(si_t *sih);
-extern u32 si_ilp_clock(si_t *sih);
-extern void si_pci_setup(si_t *sih, uint coremask);
-extern void si_setint(si_t *sih, int siflag);
-extern bool si_backplane64(si_t *sih);
-extern void si_register_intr_callback(si_t *sih, void *intrsoff_fn,
- void *intrsrestore_fn,
- void *intrsenabled_fn, void *intr_arg);
-extern void si_deregister_intr_callback(si_t *sih);
-extern void si_clkctl_init(si_t *sih);
-extern u16 si_clkctl_fast_pwrup_delay(si_t *sih);
-extern bool si_clkctl_cc(si_t *sih, uint mode);
-extern int si_clkctl_xtal(si_t *sih, uint what, bool on);
-extern bool si_deviceremoved(si_t *sih);
-extern u32 si_socram_size(si_t *sih);
-
-extern void si_watchdog(si_t *sih, uint ticks);
-extern u32 si_gpiocontrol(si_t *sih, u32 mask, u32 val,
- u8 priority);
-
-#ifdef BCMSDIO
-extern void si_sdio_init(si_t *sih);
-#endif
-
-#define si_eci(sih) 0
-#define si_eci_init(sih) (0)
-#define si_eci_notify_bt(sih, type, val) (0)
-#define si_seci(sih) 0
-
-/* OTP status */
-extern bool si_is_otp_disabled(si_t *sih);
-extern bool si_is_otp_powered(si_t *sih);
-extern void si_otp_power(si_t *sih, bool on);
-
-/* SPROM availability */
-extern bool si_is_sprom_available(si_t *sih);
-#ifdef SI_SPROM_PROBE
-extern void si_sprom_init(si_t *sih);
-#endif /* SI_SPROM_PROBE */
-
-#define SI_ERROR(args)
-
-#ifdef BCMDBG
-#define SI_MSG(args) printk args
-#else
-#define SI_MSG(args)
-#endif /* BCMDBG */
-
-/* Define SI_VMSG to printf for verbose debugging, but don't check it in */
-#define SI_VMSG(args)
-
-#define IS_SIM(chippkg) ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID))
-
-typedef u32(*si_intrsoff_t) (void *intr_arg);
-typedef void (*si_intrsrestore_t) (void *intr_arg, u32 arg);
-typedef bool(*si_intrsenabled_t) (void *intr_arg);
-
-typedef struct gpioh_item {
- void *arg;
- bool level;
- gpio_handler_t handler;
- u32 event;
- struct gpioh_item *next;
-} gpioh_item_t;
-
-/* misc si info needed by some of the routines */
-typedef struct si_info {
- struct si_pub pub; /* back plane public state (must be first) */
- void *pbus; /* handle to bus (pci/sdio/..) */
- uint dev_coreid; /* the core provides driver functions */
- void *intr_arg; /* interrupt callback function arg */
- si_intrsoff_t intrsoff_fn; /* turns chip interrupts off */
- si_intrsrestore_t intrsrestore_fn; /* restore chip interrupts */
- si_intrsenabled_t intrsenabled_fn; /* check if interrupts are enabled */
-
- void *pch; /* PCI/E core handle */
-
- gpioh_item_t *gpioh_head; /* GPIO event handlers list */
-
- bool memseg; /* flag to toggle MEM_SEG register */
-
- char *vars;
- uint varsz;
-
- void *curmap; /* current regs va */
- void *regs[SI_MAXCORES]; /* other regs va */
-
- uint curidx; /* current core index */
- uint numcores; /* # discovered cores */
- uint coreid[SI_MAXCORES]; /* id of each core */
- u32 coresba[SI_MAXCORES]; /* backplane address of each core */
- void *regs2[SI_MAXCORES]; /* va of each core second register set (usbh20) */
- u32 coresba2[SI_MAXCORES]; /* address of each core second register set (usbh20) */
- u32 coresba_size[SI_MAXCORES]; /* backplane address space size */
- u32 coresba2_size[SI_MAXCORES]; /* second address space size */
-
- void *curwrap; /* current wrapper va */
- void *wrappers[SI_MAXCORES]; /* other cores wrapper va */
- u32 wrapba[SI_MAXCORES]; /* address of controlling wrapper */
-
- u32 cia[SI_MAXCORES]; /* erom cia entry for each core */
- u32 cib[SI_MAXCORES]; /* erom cia entry for each core */
- u32 oob_router; /* oob router registers for axi */
-} si_info_t;
-
-#define SI_INFO(sih) ((si_info_t *)(sih))
-
-#define GOODCOREADDR(x, b) (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \
- IS_ALIGNED((x), SI_CORE_SIZE))
-#define GOODREGS(regs) ((regs) != NULL && IS_ALIGNED((unsigned long)(regs), SI_CORE_SIZE))
-#define BADCOREADDR 0
-#define GOODIDX(idx) (((uint)idx) < SI_MAXCORES)
-#define NOREV -1 /* Invalid rev */
-
-/* Newer chips can access PCI/PCIE and CC core without requiring to change
- * PCI BAR0 WIN
- */
-#define SI_FAST(si) (((si)->pub.buscoretype == PCIE_CORE_ID) || \
- (((si)->pub.buscoretype == PCI_CORE_ID) && (si)->pub.buscorerev >= 13))
-
-#define PCIEREGS(si) (((char *)((si)->curmap) + PCI_16KB0_PCIREGS_OFFSET))
-#define CCREGS_FAST(si) (((char *)((si)->curmap) + PCI_16KB0_CCREGS_OFFSET))
-
-/*
- * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts
- * before after core switching to avoid invalid register access inside ISR.
- */
-#define INTR_OFF(si, intr_val) \
- if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
- intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
-#define INTR_RESTORE(si, intr_val) \
- if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
- (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
-
-/* dynamic clock control defines */
-#define LPOMINFREQ 25000 /* low power oscillator min */
-#define LPOMAXFREQ 43000 /* low power oscillator max */
-#define XTALMINFREQ 19800000 /* 20 MHz - 1% */
-#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */
-#define PCIMINFREQ 25000000 /* 25 MHz */
-#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */
-
-#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */
-#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */
-
-#define PCI(si) (((si)->pub.bustype == PCI_BUS) && \
- ((si)->pub.buscoretype == PCI_CORE_ID))
-#define PCIE(si) (((si)->pub.bustype == PCI_BUS) && \
- ((si)->pub.buscoretype == PCIE_CORE_ID))
-#define PCI_FORCEHT(si) \
- (PCIE(si) && (si->pub.chip == BCM4716_CHIP_ID))
-
-/* GPIO Based LED powersave defines */
-#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */
-#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */
-
-#ifndef DEFAULT_GPIOTIMERVAL
-#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
-#endif
-
-/*
- * Build device path. Path size must be >= SI_DEVPATH_BUFSZ.
- * The returned path is NULL terminated and has trailing '/'.
- * Return 0 on success, nonzero otherwise.
- */
-extern int si_devpath(si_t *sih, char *path, int size);
-/* Read variable with prepending the devpath to the name */
-extern char *si_getdevpathvar(si_t *sih, const char *name);
-extern int si_getdevpathintvar(si_t *sih, const char *name);
-
-extern void si_war42780_clkreq(si_t *sih, bool clkreq);
-extern void si_pci_sleep(si_t *sih);
-extern void si_pci_down(si_t *sih);
-extern void si_pci_up(si_t *sih);
-extern void si_pcie_extendL1timer(si_t *sih, bool extend);
-extern int si_pci_fixcfg(si_t *sih);
-
-extern void si_chipcontrl_epa4331(si_t *sih, bool on);
-/* Enable Ex-PA for 4313 */
-extern void si_epa_4313war(si_t *sih);
-
-char *si_getnvramflvar(si_t *sih, const char *name);
-
-/* AMBA Interconnect exported externs */
-extern si_t *ai_attach(uint pcidev, void *regs, uint bustype,
- void *sdh, char **vars, uint *varsz);
-extern si_t *ai_kattach(void);
-extern void ai_scan(si_t *sih, void *regs, uint devid);
-
-extern uint ai_flag(si_t *sih);
-extern void ai_setint(si_t *sih, int siflag);
-extern uint ai_coreidx(si_t *sih);
-extern uint ai_corevendor(si_t *sih);
-extern uint ai_corerev(si_t *sih);
-extern bool ai_iscoreup(si_t *sih);
-extern void *ai_setcoreidx(si_t *sih, uint coreidx);
-extern u32 ai_core_cflags(si_t *sih, u32 mask, u32 val);
-extern void ai_core_cflags_wo(si_t *sih, u32 mask, u32 val);
-extern u32 ai_core_sflags(si_t *sih, u32 mask, u32 val);
-extern uint ai_corereg(si_t *sih, uint coreidx, uint regoff, uint mask,
- uint val);
-extern void ai_core_reset(si_t *sih, u32 bits, u32 resetbits);
-extern void ai_core_disable(si_t *sih, u32 bits);
-extern int ai_numaddrspaces(si_t *sih);
-extern u32 ai_addrspace(si_t *sih, uint asidx);
-extern u32 ai_addrspacesize(si_t *sih, uint asidx);
-extern void ai_write_wrap_reg(si_t *sih, u32 offset, u32 val);
-
-#ifdef BCMSDIO
-#define si_setcoreidx(sih, idx) sb_setcoreidx(sih, idx)
-#define si_coreid(sih) sb_coreid(sih)
-#define si_corerev(sih) sb_corerev(sih)
-#endif
-
-#endif /* _siutils_h_ */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
