We were performing it on wrong core, it was outdated and is already
implemented in ssb.
Signed-off-by: RafaÅ MiÅecki <zajec5@xxxxxxxxx>
---
drivers/net/wireless/b43legacy/main.c | 32 --------------------------------
1 files changed, 0 insertions(+), 32 deletions(-)
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index c7fd73e..2162663 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3104,37 +3104,6 @@ static void setup_struct_wldev_for_init(struct b43legacy_wldev *dev)
memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
}
-static void b43legacy_imcfglo_timeouts_workaround(struct b43legacy_wldev *dev)
-{
-#ifdef CONFIG_SSB_DRIVER_PCICORE
- struct ssb_bus *bus = dev->dev->bus;
- u32 tmp;
-
- if (bus->pcicore.dev &&
- bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
- bus->pcicore.dev->id.revision <= 5) {
- /* IMCFGLO timeouts workaround. */
- tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
- switch (bus->bustype) {
- case SSB_BUSTYPE_PCI:
- case SSB_BUSTYPE_PCMCIA:
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 0x32;
- break;
- case SSB_BUSTYPE_SSB:
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 0x53;
- break;
- default:
- break;
- }
- ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
- }
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
-}
-
static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev,
bool idle) {
u16 pu_delay = 1050;
@@ -3278,7 +3247,6 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
/* Enable IRQ routing to this device. */
ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
- b43legacy_imcfglo_timeouts_workaround(dev);
prepare_phy_data_for_init(dev);
b43legacy_phy_calibrate(dev);
err = b43legacy_chip_init(dev);
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
