Search Linux Wireless

Re: Looking for 3x3 Atheros NICs using ath9k driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4 May 2011 02:00, Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote:

> Here's the lspci for the SR71-A that doesn't work with ath9k:
>
> 03:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless
> Network Adapter (rev 01)
>        Subsystem: Atheros Communications Inc. Device ee1c

... ee1c? Err, that isn't right. Not by a very, very long shot.

What board are you putting this into?

>From FreeBSD on a RSPRO (ar71xx mips):

ath0@pci0:0:17:0:       class=0x028000 card=0x40820777 chip=0x0027168c
rev=0x01 hdr=0x00
    vendor     = 'Atheros Communications Inc.'
    class      = network

That definitely, positively is the same AC1A revision that you have.
It even does 11n(ag) too. Honest. I've seen it. :-)

This and the previous AR93xx "0xabcd" device id post is starting to
sound a lot like something's not waking up the PCI bus and/or chip
"right" in order to get the PCI vendor id init'ed from the EEPROM..



Adrian
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux