Hi all, A while back, I posted to the list looking for an AR7010+AR9280 USB 802.11n device that I could hopefully use with ath9k: http://comments.gmane.org/gmane.linux.kernel.wireless.general/67252 One adapter that came up was the Xbox 360 802.11n adapter, which has this chipset solution: http://www.wikidevi.com/wiki/Microsoft_Xbox_360_Wireless_N_Networking_Adapter I purchased one of the Xbox 360 802.11n adapters, and would now like to get it working with ath9k_htc, but having some issues. First, I added support for the USB device. I edited ./drivers/net/wireless/ath/ath9k/hif_usb.c ... and added this to static struct usb_device_id ath9k_hif_usb_ids[]: { USB_DEVICE(0x045e, 0x02a8), .driver_info = AR9280_USB }, /* Microsoft Wireless N */ After that, I rebuilt and got the module up and running. However, when I plug in the device, I get the following errors: After installing the new driver and plugging in the device, this is the error I get: [ 4599.236871] usb 1-1: ath9k_htc: Transferred FW: htc_7010.fw, size: 72996 [ 4600.237494] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive [ 4600.237494] Failed to initialize the device [ 4600.240386] ath9k_htc: probe of 1-1:1.0 failed with error -22 [ 4600.248782] usbcore: registered new interface driver ath9k_htc The light on the Xbox adapter goes solid, which makes me believe part of the firmware was written to the device. Has anyone had any experience with getting the Xbox 802.11n adapter to work with compat-wireless? If not, does anyone have any suggestions or direction I should go in? Thanks! George -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
