Hello!
I was advised by lwfinger on the opensuse-forums to send the attached
dmesg output to this email address.
The troublesome device as seen by lusb:
Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link
TL-WN821N v2 [Atheros AR9001U-(2)NG]
This USB WLAN Stick worked fine for several months with Suse11.3 out of
the box, but upon upgrading to Suse11.4, it was not even recognized any
more. Following advice on the opensuse-forums (installing
compat-wireless and carl9170), the device is now recognized and works,
but the connection is very slow and breaks down after a minute of data
transfer (but the connection can often be restored again by the
networkmanager). The other end of the WLAN, a D-Link DIR-655 router,
remains unchanged and works fine with several other WLAN devices.
The dmesg.out was taken after: booting, then using the USB WLAN Stick to
browse the net, which caused the connection to drop, networkmanager
reconnecting, browsing, dropping again and eventually connecting the
machine to the net by Ethernet via a WLAN-Bridge device.
Please let me know if this is of any use or whether I can provide any
other information or do some testing to improve the carl9170 driver.
Thanks,
Steffen Jost.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.6-0.5-default (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-04-25 21:48:33 +0200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d2000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002dff0000 (usable)
[ 0.000000] BIOS-e820: 000000002dff0000 - 000000002dff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002dff8000 - 000000002e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: K7VM2./K7VM2., BIOS P1.90 08/28/2003
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x2dff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF0000000 write-back
[ 0.000000] 2 base 02E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0E0000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002dff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002dc00000 page 2M
[ 0.000000] 002dc00000 - 002dff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 2dff0000 @ ffb000-1000000
[ 0.000000] RAMDISK: 2d502000 - 2dfe0000
[ 0.000000] ACPI: RSDP 000fa6f0 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 2dff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 2dff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 2dff0120 0314B (v01 VIA KM266 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 2dff8000 00040
[ 0.000000] ACPI: APIC 2dff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 735MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2dff0000
[ 0.000000] low ram: 0 - 2dff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002dff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002dff0
[ 0.000000] On node 0 totalpages: 188287
[ 0.000000] free_area_init_node: node 0, pgdat c0902c00, node_mem_map ecf42200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1440 pages used for memmap
[ 0.000000] Normal zone: 182864 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000
[ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 2e000000 (gap: 2e000000:d0c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ec800000 s27264 r0 d21888 u4194304
[ 0.000000] pcpu-alloc: s27264 r0 d21888 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186815
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD400BB-00CAA1_WD-WMA8E8858272-part5 resume=/dev/disk/by-id/ata-WDC_WD400BB-00CAA1_WD-WMA8E8858272-part1 splash=silent quiet showopts vga=0x314
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3767680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 722868k/753600k available (4109k kernel code, 30280k reserved, 3127k data, 428k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd33000 - 0xfffff000 (2864 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xee7f0000 - 0xff7fe000 ( 272 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xedff0000 ( 735 MB)
[ 0.000000] .init : 0xc0912000 - 0xc097d000 ( 428 kB)
[ 0.000000] .data : 0xc0603783 - 0xc0911708 (3127 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0603783 (4109 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ec408000 soft=ec40a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.480 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.96 BogoMIPS (lpj=6649920)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004091] Security Framework initialized
[ 0.004140] AppArmor: AppArmor initialized
[ 0.004230] Mount-cache hash table entries: 512
[ 0.004465] Initializing cgroup subsys ns
[ 0.004471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004476] Initializing cgroup subsys cpuacct
[ 0.004482] Initializing cgroup subsys memory
[ 0.004494] Initializing cgroup subsys devices
[ 0.004498] Initializing cgroup subsys freezer
[ 0.004502] Initializing cgroup subsys net_cls
[ 0.004506] Initializing cgroup subsys blkio
[ 0.004560] mce: CPU supports 4 MCE banks
[ 0.004593] Performance Events: AMD PMU driver.
[ 0.004605] ... version: 0
[ 0.004607] ... bit width: 48
[ 0.004609] ... generic registers: 4
[ 0.004612] ... value mask: 0000ffffffffffff
[ 0.004615] ... max period: 00007fffffffffff
[ 0.004617] ... fixed-purpose events: 0
[ 0.004620] ... event mask: 000000000000000f
[ 0.005118] SMP alternatives: switching to UP code
[ 0.012105] Freeing SMP alternatives: 28k freed
[ 0.012152] ACPI: Core revision 20101013
[ 0.019824] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020929] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060626] CPU0: AMD Athlon(tm) XP 2000+ stepping 01
[ 0.064000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064000] Brought up 1 CPUs
[ 0.064000] Total of 1 processors activated (3324.96 BogoMIPS).
[ 0.064000] devtmpfs: initialized
[ 0.064000] regulator: core version 0.5
[ 0.064000] regulator: dummy:
[ 0.064000] Time: 13:01:42 Date: 04/30/11
[ 0.064000] NET: Registered protocol family 16
[ 0.064000] ACPI: bus type pci registered
[ 0.066766] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
[ 0.066769] PCI: Using configuration type 1 for base access
[ 0.068087] bio: create slab <bio-0> at 0
[ 0.069256] ACPI: EC: Look up EC in DSDT
[ 0.075101] ACPI: Interpreter enabled
[ 0.075108] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.075148] ACPI: Using IOAPIC for interrupt routing
[ 0.076072] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.076102] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.076234] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.076353] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.076499] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.076640] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.080247] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.080531] ACPI: Power Resource [URP1] (off)
[ 0.080562] ACPI: Power Resource [URP2] (off)
[ 0.080593] ACPI: Power Resource [FDDP] (off)
[ 0.080626] ACPI: Power Resource [LPTP] (off)
[ 0.080802] ACPI: No dock devices found.
[ 0.080811] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.081008] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.081315] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.081320] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.081324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.081328] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.081333] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xffdfffff] (ignored)
[ 0.081337] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[ 0.081370] pci 0000:00:00.0: [1106:3116] type 0 class 0x000600
[ 0.081385] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.081460] pci 0000:00:01.0: [1106:b091] type 1 class 0x000604
[ 0.081500] pci 0000:00:01.0: supports D1
[ 0.081534] pci 0000:00:0a.0: [1244:0e00] type 0 class 0x000280
[ 0.081551] pci 0000:00:0a.0: reg 10: [mem 0xdfffffe0-0xdfffffff]
[ 0.081561] pci 0000:00:0a.0: reg 14: [io 0xec00-0xec1f]
[ 0.081613] pci 0000:00:0a.0: supports D2
[ 0.081617] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold
[ 0.081622] pci 0000:00:0a.0: PME# disabled
[ 0.081651] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.081693] pci 0000:00:10.0: reg 20: [io 0xe000-0xe01f]
[ 0.081723] pci 0000:00:10.0: supports D1 D2
[ 0.081726] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081731] pci 0000:00:10.0: PME# disabled
[ 0.081755] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.081797] pci 0000:00:10.1: reg 20: [io 0xe400-0xe41f]
[ 0.081827] pci 0000:00:10.1: supports D1 D2
[ 0.081830] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081835] pci 0000:00:10.1: PME# disabled
[ 0.081857] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.081899] pci 0000:00:10.2: reg 20: [io 0xe800-0xe81f]
[ 0.081929] pci 0000:00:10.2: supports D1 D2
[ 0.081933] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081938] pci 0000:00:10.2: PME# disabled
[ 0.081962] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[ 0.081979] pci 0000:00:10.3: reg 10: [mem 0xdffffe00-0xdffffeff]
[ 0.082035] pci 0000:00:10.3: supports D1 D2
[ 0.082038] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082043] pci 0000:00:10.3: PME# disabled
[ 0.082070] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[ 0.082131] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.082142] pci 0000:00:11.0: quirk: [io 0x0800-0x087f] claimed by vt8235 PM
[ 0.082147] pci 0000:00:11.0: quirk: [io 0x0400-0x040f] claimed by vt8235 SMB
[ 0.082186] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[ 0.082230] pci 0000:00:11.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.082287] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.082304] pci 0000:00:11.5: reg 10: [io 0xdc00-0xdcff]
[ 0.082364] pci 0000:00:11.5: supports D1 D2
[ 0.082398] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[ 0.082414] pci 0000:00:12.0: reg 10: [io 0xd800-0xd8ff]
[ 0.082425] pci 0000:00:12.0: reg 14: [mem 0xdffffd00-0xdffffdff]
[ 0.082476] pci 0000:00:12.0: supports D1 D2
[ 0.082479] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082484] pci 0000:00:12.0: PME# disabled
[ 0.082546] pci 0000:01:00.0: [5333:8d04] type 0 class 0x000300
[ 0.082562] pci 0000:01:00.0: reg 10: [mem 0xdfe80000-0xdfefffff]
[ 0.082571] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
[ 0.082602] pci 0000:01:00.0: reg 30: [mem 0xdfe70000-0xdfe7ffff pref]
[ 0.082621] pci 0000:01:00.0: supports D1 D2
[ 0.082654] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.082661] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.082666] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfefffff]
[ 0.082672] pci 0000:00:01.0: bridge window [mem 0xcfc00000-0xdfbfffff pref]
[ 0.082682] pci_bus 0000:00: on NUMA node 0
[ 0.082688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.095100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.095222] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.095340] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.095458] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.095503] HEST: Table is not found!
[ 0.095908] SCSI subsystem initialized
[ 0.096086] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.096090] vgaarb: loaded
[ 0.096364] PCI: Using ACPI for IRQ routing
[ 0.096372] PCI: pci_cache_line_size set to 32 bytes
[ 0.096437] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.096442] reserve RAM buffer: 000000002dff0000 - 000000002fffffff
[ 0.096653] NetLabel: Initializing
[ 0.096656] NetLabel: domain hash size = 128
[ 0.096658] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.096682] NetLabel: unlabeled traffic allowed by default
[ 0.096700] Switching to clocksource tsc
[ 0.099426] AppArmor: AppArmor Filesystem Enabled
[ 0.099478] pnp: PnP ACPI init
[ 0.099552] ACPI: bus type pnp registered
[ 0.099946] pnp 00:00: [bus 00-ff]
[ 0.099952] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.099957] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.099961] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.099965] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.099969] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.099973] pnp 00:00: [mem 0x30000000-0xffdfffff window]
[ 0.099977] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[ 0.099977] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.099977] pnp 00:01: [io 0x03f2-0x03f3]
[ 0.099977] pnp 00:01: [io 0x03f4-0x03f5]
[ 0.099977] pnp 00:01: [io 0x03f7]
[ 0.099977] pnp 00:01: [irq 6]
[ 0.099977] pnp 00:01: [dma 2]
[ 0.099977] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.100463] pnp 00:02: [io 0x0010-0x001f]
[ 0.100468] pnp 00:02: [io 0x0022-0x003f]
[ 0.100471] pnp 00:02: [io 0x0044-0x005f]
[ 0.100475] pnp 00:02: [io 0x0062-0x0063]
[ 0.100478] pnp 00:02: [io 0x0065-0x006f]
[ 0.100481] pnp 00:02: [io 0x0072-0x007f]
[ 0.100484] pnp 00:02: [io 0x0080]
[ 0.100487] pnp 00:02: [io 0x0084-0x0086]
[ 0.100490] pnp 00:02: [io 0x0088]
[ 0.100493] pnp 00:02: [io 0x008c-0x008e]
[ 0.100496] pnp 00:02: [io 0x0090-0x009f]
[ 0.100499] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.100503] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.100506] pnp 00:02: [io 0x0295-0x0296]
[ 0.100509] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.100513] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.100516] pnp 00:02: [io 0x0400-0x040f]
[ 0.100519] pnp 00:02: [io 0x0800-0x087f]
[ 0.100523] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.100526] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.100631] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.100668] pnp 00:03: [dma 4]
[ 0.100672] pnp 00:03: [io 0x0000-0x000f]
[ 0.100676] pnp 00:03: [io 0x0081-0x0083]
[ 0.100683] pnp 00:03: [io 0x0087]
[ 0.100687] pnp 00:03: [io 0x0089-0x008b]
[ 0.100691] pnp 00:03: [io 0x008f]
[ 0.100694] pnp 00:03: [io 0x00c0-0x00df]
[ 0.100742] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.100764] pnp 00:04: [io 0x0070-0x0071]
[ 0.100773] pnp 00:04: [irq 8]
[ 0.100825] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.100843] pnp 00:05: [io 0x0061]
[ 0.100891] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.100910] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.100917] pnp 00:06: [irq 13]
[ 0.100965] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.101040] pnp 00:07: [io 0x0060]
[ 0.101044] pnp 00:07: [io 0x0064]
[ 0.101052] pnp 00:07: [irq 1]
[ 0.101107] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.101405] pnp: PnP ACPI: found 8 devices
[ 0.101408] ACPI: ACPI bus type pnp unregistered
[ 0.101416] PnPBIOS: Disabled by ACPI PNP
[ 0.101444] system 00:02: [io 0x0295-0x0296] has been reserved
[ 0.101449] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.101453] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.101457] system 00:02: [io 0x0400-0x040f] has been reserved
[ 0.101461] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.101468] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.101473] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.139796] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.139802] pci 0000:00:01.0: bridge window [io disabled]
[ 0.139811] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfefffff]
[ 0.139818] pci 0000:00:01.0: bridge window [mem 0xcfc00000-0xdfbfffff pref]
[ 0.139841] pci 0000:00:01.0: setting latency timer to 64
[ 0.139848] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.139852] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.139857] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfefffff]
[ 0.139861] pci_bus 0000:01: resource 2 [mem 0xcfc00000-0xdfbfffff pref]
[ 0.140012] NET: Registered protocol family 2
[ 0.140155] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.140981] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.144861] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.146664] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.146670] TCP reno registered
[ 0.146682] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146746] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.147119] NET: Registered protocol family 1
[ 0.147161] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.147352] pci 0000:01:00.0: Boot video device
[ 0.147357] PCI: CLS 32 bytes, default 32
[ 0.147511] Unpacking initramfs...
[ 0.580367] Freeing initrd memory: 11128k freed
[ 0.621099] audit: initializing netlink socket (disabled)
[ 0.621141] type=2000 audit(1304168502.616:1): initialized
[ 0.641521] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.641775] VFS: Disk quotas dquot_6.5.2
[ 0.641824] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.642014] msgmni has been set to 358
[ 0.642391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.642434] io scheduler noop registered
[ 0.642437] io scheduler deadline registered
[ 0.642452] io scheduler cfq registered (default)
[ 0.643189] vesafb: framebuffer at 0xd0000000, mapped to 0xee880000, using 1875k, total 31680k
[ 0.643194] vesafb: mode is 800x600x16, linelength=1600, pages=32
[ 0.643197] vesafb: protected mode interface info at c000:7f61
[ 0.643201] vesafb: pmi: set display start = c00c7fef, set palette = c00c8038
[ 0.643204] vesafb: scrolling: redraw
[ 0.643209] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.644862] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.644873] bootsplash: silentjpeg size 124451 bytes
[ 0.665155] bootsplash: ...found (800x600, 111015 bytes, v3).
[ 0.718728] Console: switching to colour frame buffer device 96x33
[ 0.771009] fb0: VESA VGA frame buffer device
[ 0.771163] ERST: Table is not found!
[ 0.771222] isapnp: Scanning for PnP cards...
[ 1.081235] isapnp: No Plug & Play device found
[ 1.081825] Non-volatile memory driver v1.3
[ 1.081829] Linux agpgart interface v0.103
[ 1.082046] agpgart: Detected VIA PM266/KM266 chipset
[ 1.093279] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 1.093335] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 1.095473] Fixed MDIO Bus: probed
[ 1.095548] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.095552] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.095781] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.095960] mice: PS/2 mouse device common for all mice
[ 1.096388] cpuidle: using governor ladder
[ 1.096393] cpuidle: using governor menu
[ 1.096793] TCP cubic registered
[ 1.096838] NET: Registered protocol family 10
[ 1.097436] lo: Disabled Privacy Extensions
[ 1.097807] Registering the dns_resolver key type
[ 1.097934] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 1.097956] Using IPI No-Shortcut mode
[ 1.098204] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD400BB-00CAA1_WD-WMA8E8858272-part1
[ 1.114192] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.114286] PM: Hibernation image not present or could not be loaded.
[ 1.114314] registered taskstats version 1
[ 1.114582] Magic number: 7:581:29
[ 1.114936] Freeing unused kernel memory: 428k freed
[ 1.116098] Write protecting the kernel text: 4112k
[ 1.116174] Write protecting the kernel read-only data: 2868k
[ 1.243374] libata version 3.00 loaded.
[ 1.247376] pata_via 0000:00:11.1: version 0.3.4
[ 1.247413] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 1.248312] scsi0 : pata_via
[ 1.248521] scsi1 : pata_via
[ 1.251719] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.251724] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.413475] ata1.00: ATA-5: WDC WD400BB-00CAA1, 17.07W17, max UDMA/100
[ 1.413481] ata1.00: 78165360 sectors, multi 16: LBA
[ 1.429280] ata1.00: configured for UDMA/100
[ 1.429577] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00CA 17.0 PQ: 0 ANSI: 5
[ 1.430199] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.430287] sd 0:0:0:0: [sda] Write Protect is off
[ 1.430293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.430331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.484586] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.485226] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.872824] ata2.00: ATAPI: IDE DVD-ROM 16X, V3.10, max UDMA/33
[ 1.872833] ata2.01: ATAPI: LITE-ON LTR-32123S, XS0X, max UDMA/33
[ 1.880349] ata2.00: configured for UDMA/33
[ 1.896213] ata2.01: configured for UDMA/33
[ 1.904397] scsi 1:0:0:0: CD-ROM IDE DVD-ROM 16X 3.10 PQ: 0 ANSI: 5
[ 1.910337] scsi 1:0:1:0: CD-ROM LITE-ON LTR-32123S XS0X PQ: 0 ANSI: 5
[ 1.938050] ACPI: acpi_idle registered with cpuidle
[ 1.964465] udev[75]: starting version 166
[ 2.039783] usbcore: registered new interface driver usbfs
[ 2.039852] usbcore: registered new interface driver hub
[ 2.285990] rtc_cmos 00:04: RTC can wake from S4
[ 2.286217] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.286286] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 2.327298] usbcore: registered new device driver usb
[ 2.340271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.340393] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 2.340444] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 2.340513] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 2.340638] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffffe00
[ 2.352096] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 2.352203] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.352208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.352213] usb usb1: Product: EHCI Host Controller
[ 2.352217] usb usb1: Manufacturer: Linux 2.6.37.6-0.5-default ehci_hcd
[ 2.352220] usb usb1: SerialNumber: 0000:00:10.3
[ 2.352555] hub 1-0:1.0: USB hub found
[ 2.352568] hub 1-0:1.0: 6 ports detected
[ 2.362337] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.362493] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.362525] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.362566] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.362616] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[ 2.362708] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.362712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.362717] usb usb2: Product: UHCI Host Controller
[ 2.362720] usb usb2: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd
[ 2.362723] usb usb2: SerialNumber: 0000:00:10.0
[ 2.363022] hub 2-0:1.0: USB hub found
[ 2.363038] hub 2-0:1.0: 2 ports detected
[ 2.363163] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.363173] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.363194] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.363220] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
[ 2.363277] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.363281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.363285] usb usb3: Product: UHCI Host Controller
[ 2.363288] usb usb3: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd
[ 2.363292] usb usb3: SerialNumber: 0000:00:10.1
[ 2.363448] hub 3-0:1.0: USB hub found
[ 2.363455] hub 3-0:1.0: 2 ports detected
[ 2.363551] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.363562] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.363574] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.363599] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[ 2.363655] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.363659] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.363663] usb usb4: Product: UHCI Host Controller
[ 2.363666] usb usb4: Manufacturer: Linux 2.6.37.6-0.5-default uhci_hcd
[ 2.363669] usb usb4: SerialNumber: 0000:00:10.2
[ 2.363825] hub 4-0:1.0: USB hub found
[ 2.363832] hub 4-0:1.0: 2 ports detected
[ 2.720091] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 2.942215] usb 1-2: New USB device found, idVendor=0cf3, idProduct=1002
[ 2.942225] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.942231] usb 1-2: Product: USB2.0 WLAN
[ 2.942234] usb 1-2: Manufacturer: ATHER
[ 2.942237] usb 1-2: SerialNumber: 12345
[ 3.021744] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.021754] PM: Basic memory bitmaps created
[ 3.029078] PM: Basic memory bitmaps freed
[ 3.056068] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 3.103222] PM: Starting manual resume from disk
[ 3.103232] PM: Hibernation image partition 8:1 present
[ 3.103234] PM: Looking for hibernation image.
[ 3.103678] PM: Image not found (code -22)
[ 3.103681] PM: Hibernation image not present or could not be loaded.
[ 3.207676] usb 1-3: New USB device found, idVendor=0ac8, idProduct=3450
[ 3.207685] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.207691] usb 1-3: Product: Vimicro USB Camera (Altair)
[ 3.207694] usb 1-3: Manufacturer: Vimicro
[ 3.410309] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.536924] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 3.575544] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 3.752718] usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
[ 3.752728] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.752733] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 3.752736] usb 2-1: Manufacturer: Logitech
[ 3.992059] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.190322] usb 3-2: New USB device found, idVendor=03f0, idProduct=3a11
[ 4.190330] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.190336] usb 3-2: Product: officejet 5500 series
[ 4.190339] usb 3-2: Manufacturer: hp
[ 4.190341] usb 3-2: SerialNumber: MY39NC20M896
[ 5.212212] preloadtrace: systemtap: 1.4/0.149, base: eee4c000, memory: 30data/39text/6ctx/13net/260alloc kb, probes: 34
[ 6.332405] udev[306]: starting version 166
[ 7.040255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.303292] WARNING! power/level is deprecated; use power/control instead
[ 7.318094] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.318277] ACPI: Power Button [PWRB]
[ 7.318411] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 7.318475] ACPI: Sleep Button [SLPB]
[ 7.318561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.318620] ACPI: Power Button [PWRF]
[ 7.341192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.416895] Floppy drive(s): fd0 is 1.44M
[ 7.436231] FDC 0 is a post-1991 82077
[ 7.451340] NET: Registered protocol family 23
[ 7.548722] Modular ISDN core version 1.1.21
[ 7.549012] NET: Registered protocol family 34
[ 7.579886] mISDNipac module version 2.0
[ 7.590165] AVM Fritz PCI driver Rev. 2.1
[ 7.590280] fcpci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.590286] mISDN: found adapter Fritz!Card PCI v2 at 0000:00:0a.0
[ 7.590306] AVM.1: AVM Fritz!CARD PCIv2 config irq:18 base:0xEC00
[ 7.612023] AVM 1 cards installed DEBUG
[ 7.700671] cfg80211: Calling CRDA to update world regulatory domain
[ 7.748665] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 7.748791] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.753579] eth0: VIA Rhine II at 0xdffffd00, 00:0b:6a:26:5f:78, IRQ 23.
[ 7.754295] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 7.798025] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.036361] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.036454] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.036527] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 8.199839] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input5
[ 8.200224] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1/input0
[ 8.200290] usbcore: registered new interface driver usbhid
[ 8.200293] usbhid: USB HID core driver
[ 8.289875] Linux video capture interface: v2.00
[ 8.401709] sr0: scsi3-mmc drive: 16x/16x cd/rw xa/form2 cdda tray
[ 8.401725] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 8.402058] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.455097] sr1: scsi3-mmc drive: 212x/40x writer cd/rw xa/form2 cdda tray
[ 8.455433] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 8.594504] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450)
[ 8.606810] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0/input/input6
[ 8.606968] usbcore: registered new interface driver uvcvideo
[ 8.607112] USB Video Class driver (v1.0.0)
[ 8.643052] cfg80211: World regulatory domain updated:
[ 8.643065] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.643070] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.643074] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.643078] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.643082] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.643086] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.713544] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 8.983866] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 8.984064] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 9.442102] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3A11
[ 9.442166] usbcore: registered new interface driver usblp
[ 9.916283] usbcore: registered new interface driver ar9170usb
[ 10.177059] usb 1-2: ar9170.fw firmware file not found, trying old firmware...
[ 10.526000] Adding 449784k swap on /dev/sda1. Priority:-1 extents:1 across:449784k
[ 11.130602] ath: EEPROM regdomain: 0x809c
[ 11.130610] ath: EEPROM indicates we should expect a country code
[ 11.130614] ath: doing EEPROM country->regdmn map search
[ 11.130618] ath: country maps to regdmn code: 0x52
[ 11.130623] ath: Country alpha2 being used: CN
[ 11.130626] ath: Regpair used: 0x52
[ 11.258624] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.260459] cfg80211: Calling CRDA for country: CN
[ 11.264370] Registered led device: ar9170-phy0::tx
[ 11.264429] Registered led device: ar9170-phy0::assoc
[ 11.264437] usb 1-2: Atheros AR9170 is registered as 'phy0'
[ 11.291923] cfg80211: Regulatory domain changed to country: CN
[ 11.291933] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.291938] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.291942] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 11.719225] device-mapper: uevent: version 1.0.3
[ 11.731016] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx
[ 12.347921] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[ 12.472178] REISERFS (device sda2): found reiserfs format "3.6" with standard journal
[ 12.472279] REISERFS (device sda2): using ordered data mode
[ 12.472282] reiserfs: using flush barriers
[ 12.475004] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.479564] REISERFS (device sda2): checking transaction log (sda2)
[ 12.545594] REISERFS (device sda2): Using r5 hash to sort names
[ 14.868905] type=1400 audit(1304168516.868:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=764 comm="apparmor_parser"
[ 15.002669] type=1400 audit(1304168517.000:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=803 comm="apparmor_parser"
[ 15.413970] type=1400 audit(1304168517.412:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=807 comm="apparmor_parser"
[ 15.758482] type=1400 audit(1304168517.756:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=811 comm="apparmor_parser"
[ 17.053604] type=1400 audit(1304168519.052:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=816 comm="apparmor_parser"
[ 17.054145] type=1400 audit(1304168519.052:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=816 comm="apparmor_parser"
[ 17.054371] type=1400 audit(1304168519.052:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=816 comm="apparmor_parser"
[ 17.054776] type=1400 audit(1304168519.052:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=816 comm="apparmor_parser"
[ 17.361797] type=1400 audit(1304168519.360:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=820 comm="apparmor_parser"
[ 17.723610] type=1400 audit(1304168519.720:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=824 comm="apparmor_parser"
[ 20.262022] audit_printk_skb: 21 callbacks suppressed
[ 20.262032] type=1400 audit(1304168522.260:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dovecot" pid=856 comm="apparmor_parser"
[ 20.719161] type=1400 audit(1304168522.716:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=860 comm="apparmor_parser"
[ 21.247346] type=1400 audit(1304168523.244:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mdnsd" pid=864 comm="apparmor_parser"
[ 22.088399] type=1400 audit(1304168524.088:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nmbd" pid=868 comm="apparmor_parser"
[ 22.544367] type=1400 audit(1304168524.544:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nscd" pid=872 comm="apparmor_parser"
[ 23.421976] type=1400 audit(1304168525.420:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=876 comm="apparmor_parser"
[ 24.501722] type=1400 audit(1304168526.500:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbd" pid=880 comm="apparmor_parser"
[ 24.966283] type=1400 audit(1304168526.964:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/traceroute" pid=884 comm="apparmor_parser"
[ 32.136560] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 33.103306] nf_conntrack version 0.5.0 (11475 buckets, 45900 max)
[ 34.142794] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.395165] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 40.701994] powernow-k8: Processor cpuid 681 not supported
[ 41.761008] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.772083] eth0: link down
[ 41.772682] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.162420] [drm] Initialized drm 1.1.0 20060810
[ 42.185748] NET: Registered protocol family 17
[ 42.742619] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 42.743009] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
[ 42.748338] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 42.748383] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[ 42.748450] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[ 46.489140] start_kdeinit (1553): /proc/1553/oom_adj is deprecated, please use /proc/1553/oom_score_adj instead.
[ 50.604231] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0
[ 50.771740] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
[ 53.838536] wlan0: authenticate with 00:24:01:28:34:bb (try 1)
[ 53.840790] wlan0: authenticated
[ 53.840924] wlan0: associate with 00:24:01:28:34:bb (try 1)
[ 53.844850] wlan0: RX AssocResp from 00:24:01:28:34:bb (capab=0x431 status=0 aid=2)
[ 53.844861] wlan0: associated
[ 53.950756] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 66.024714] bootsplash: status on console 0 changed to on
[ 96.342080] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 108.989609] fuse init (API version 7.15)
[ 109.422601] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1598 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 111.712964] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1618 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 127.163474] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1793 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 139.693716] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=1925 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 150.788254] wlan0: deauthenticated from 00:24:01:28:34:bb (Reason: 4)
[ 150.902192] cfg80211: Calling CRDA to update world regulatory domain
[ 151.067312] cfg80211: World regulatory domain updated:
[ 151.067330] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 151.067336] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 151.067341] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 151.067345] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 151.067349] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 151.067352] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 153.397131] wlan0: authenticate with 00:24:01:28:34:bb (try 1)
[ 153.596062] wlan0: authenticate with 00:24:01:28:34:bb (try 2)
[ 153.796164] wlan0: authenticate with 00:24:01:28:34:bb (try 3)
[ 153.996066] wlan0: authentication with 00:24:01:28:34:bb timed out
[ 165.797685] wlan0: direct probe to 00:24:01:28:34:bb (try 1)
[ 165.996080] wlan0: direct probe to 00:24:01:28:34:bb (try 2)
[ 166.196066] wlan0: direct probe to 00:24:01:28:34:bb (try 3)
[ 166.396208] wlan0: direct probe to 00:24:01:28:34:bb timed out
[ 169.161471] wlan0: direct probe to 00:24:01:28:34:bb (try 1)
[ 169.360072] wlan0: direct probe to 00:24:01:28:34:bb (try 2)
[ 169.560040] wlan0: direct probe to 00:24:01:28:34:bb (try 3)
[ 169.760036] wlan0: direct probe to 00:24:01:28:34:bb timed out
[ 181.580185] wlan0: direct probe to 00:24:01:28:34:bb (try 1)
[ 181.780063] wlan0: direct probe to 00:24:01:28:34:bb (try 2)
[ 181.980176] wlan0: direct probe to 00:24:01:28:34:bb (try 3)
[ 182.180041] wlan0: direct probe to 00:24:01:28:34:bb timed out
[ 198.860150] wlan0: direct probe to 00:24:01:28:34:bb (try 1)
[ 199.060193] wlan0: direct probe to 00:24:01:28:34:bb (try 2)
[ 199.260147] wlan0: direct probe to 00:24:01:28:34:bb (try 3)
[ 199.460050] wlan0: direct probe to 00:24:01:28:34:bb timed out
[ 211.263257] wlan0: direct probe to 00:24:01:28:34:bb (try 1)
[ 211.460078] wlan0: direct probe to 00:24:01:28:34:bb (try 2)
[ 211.660077] wlan0: direct probe to 00:24:01:28:34:bb (try 3)
[ 211.860041] wlan0: direct probe to 00:24:01:28:34:bb timed out
[ 230.493024] wlan0: authenticate with 00:24:01:28:34:bb (try 1)
[ 230.496972] wlan0: authenticated
[ 230.497119] wlan0: associate with 00:24:01:28:34:bb (try 1)
[ 230.500902] wlan0: RX AssocResp from 00:24:01:28:34:bb (capab=0x431 status=0 aid=2)
[ 230.500920] wlan0: associated
[ 234.765224] martian source 255.255.255.255 from 192.168.0.1, on dev wlan0
[ 234.765239] ll header: ff:ff:ff:ff:ff:ff:00:24:01:28:34:bb:08:00
[ 242.680367] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3111 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 261.487153] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3331 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 264.847381] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3361 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 267.447303] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3387 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 269.442531] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=173.57.93.224 DST=192.168.0.194 LEN=54 TOS=0x00 PREC=0x00 TTL=109 ID=3419 PROTO=UDP SPT=61773 DPT=1025 LEN=34
[ 378.311650] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=23363 PROTO=UDP SPT=53 DPT=48287 LEN=126
[ 378.526081] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=23364 PROTO=UDP SPT=53 DPT=48287 LEN=126
[ 379.586986] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=23371 PROTO=UDP SPT=53 DPT=51789 LEN=131
[ 379.737029] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=94:0c:6d:8f:6e:67:00:24:01:28:34:bb:08:00 SRC=192.168.0.1 DST=192.168.0.194 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=23374 PROTO=UDP SPT=53 DPT=51789 LEN=131
