The LED gpio is incorrectly programmed for AR9300 and so the led is not working propelry. AR93xx uses gpio 10 for LED and not the default. Cc: compat@xxxxxxxxxxxxx Signed-off-by: Senthil Balasubramanian <senthilkumar@xxxxxxxxxxx> --- v2: ccing compat@xxxxxxxxxxxxx drivers/net/wireless/ath/ath9k/ath9k.h | 1 + drivers/net/wireless/ath/ath9k/gpio.c | 2 ++ 2 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index a6b5388..5ebfc57 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -453,6 +453,7 @@ void ath9k_btcoex_timer_pause(struct ath_softc *sc); #define ATH_LED_PIN_DEF 1 #define ATH_LED_PIN_9287 8 +#define ATH_LED_PIN_9300 10 #define ATH_LED_PIN_9485 6 #ifdef CONFIG_MAC80211_LEDS diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c index 44a0a88..3e617e7 100644 --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c @@ -46,6 +46,8 @@ void ath_init_leds(struct ath_softc *sc) sc->sc_ah->led_pin = ATH_LED_PIN_9287; else if (AR_SREV_9485(sc->sc_ah)) sc->sc_ah->led_pin = ATH_LED_PIN_9485; + else if (AR_SREV_9300(sc->sc_ah)) + sc->sc_ah->led_pin = ATH_LED_PIN_9300; else sc->sc_ah->led_pin = ATH_LED_PIN_DEF; } -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
