Hi Roberto! Did you do EVERYTHING as described on this page: http://acx100.erley.org/stable.html I once had a similar error as you have, which was due to not having installed crda, if I remember correctly. Just a thought of mine. Best regards, Dennis Roberto Riggio schrieb: > Hi, > > I'm using openwrt with the latest compat wireless. Is an ath9k supported > wireless NIC supposed to work over channel 12 and 13 if the country code > is set to IT? > > If I run: > > iw phy phy0 info > > tis is what i get: > > Frequencies: > * 2412 MHz [1] (20.0 dBm) > * 2417 MHz [2] (20.0 dBm) > * 2422 MHz [3] (20.0 dBm) > * 2427 MHz [4] (20.0 dBm) > * 2432 MHz [5] (20.0 dBm) > * 2437 MHz [6] (20.0 dBm) > * 2442 MHz [7] (20.0 dBm) > * 2447 MHz [8] (20.0 dBm) > * 2452 MHz [9] (20.0 dBm) > * 2457 MHz [10] (20.0 dBm) > * 2462 MHz [11] (20.0 dBm) > * 2467 MHz [12] (disabled) > * 2472 MHz [13] (disabled) > * 2484 MHz [14] (disabled) > > Actually, I get the same even if I set the country code to JP,where also > channel 14 should be supported. > > Thanks > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
