I'm still fighting with my PCI card. It used to work but I guess the hardware could have died. It won't get an IP from lbuntu network manager. Does anyone have any ideas? I guess one of my next steps is to find a Windows box to try it with. I booted lbuntu from USB and this is what it sees: [ 14.160380] ath9k 0000:02:09.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19 [ 14.583596] ath: EEPROM regdomain: 0x10 [ 14.583599] ath: EEPROM indicates we should expect a direct regpair map [ 14.583602] ath: Country alpha2 being used: CO [ 14.583603] ath: Regpair used: 0x10 [ 14.625139] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 14.625720] Registered led device: ath9k-phy0::radio [ 14.625739] Registered led device: ath9k-phy0::assoc [ 14.625756] Registered led device: ath9k-phy0::tx [ 14.625776] Registered led device: ath9k-phy0::rx [ 14.625780] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xf82c0000, irq=19 [ 14.625912] cfg80211: Calling CRDA for country: CO [ 14.636694] cfg80211: Regulatory domain changed to country: CO [ 14.636697] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.636700] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 14.636703] (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm) [ 14.636705] (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm) [ 14.636707] (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm) [ 142.265205] wlan0: authenticate with 00:18:3f:b6:7d:69 (try 1) [ 142.268896] wlan0: authenticated [ 142.273175] wlan0: associate with 00:18:3f:b6:7d:69 (try 1) [ 142.278909] wlan0: RX AssocResp from 00:18:3f:b6:7d:69 (capab=0x421 status=0 aid=1) [ 142.278918] wlan0: associated [ 142.279566] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 142.279732] cfg80211: Calling CRDA for country: US [ 142.292138] wlan0: deauthenticating from 00:18:3f:b6:7d:69 by local choice (reason=3) [ 142.294425] cfg80211: Received country IE: [ 142.294433] cfg80211: Regulatory domain: US [ 142.294437] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 142.294444] (2402000 KHz - 2472000 KHz @ 40000 KHz), (10000 mBi, 2700 mBm) [ 142.294448] cfg80211: CRDA thinks this should applied: [ 142.294452] cfg80211: Regulatory domain: US [ 142.294455] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 142.294461] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 142.294468] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 142.294474] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.294480] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.294486] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.294492] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 142.294496] cfg80211: We intersect both of these and get: [ 142.294499] cfg80211: Regulatory domain: 98 [ 142.294503] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 142.294509] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 142.294520] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 142.294525] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 142.294530] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 142.294538] cfg80211: Current regulatory domain updated by AP to: US [ 142.294542] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 142.294548] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 142.294983] cfg80211: All devices are disconnected, going to restore regulatory settings [ 142.294992] cfg80211: Restoring regulatory settings [ 142.295000] cfg80211: Calling CRDA to update world regulatory domain [ 142.310828] cfg80211: World regulatory domain updated: [ 142.310838] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 142.310845] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.310852] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 142.310858] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 142.310864] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 142.310870] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
