Hi, Got a bug report: https://bugzilla.gnome.org/show_bug.cgi?id=644551 that has this error log in it. Is that enough to figure out where things have gone wrong in the firmware? [ 1286.750258] iwl3945 0000:03:00.0: Microcode SW error detected. Restarting 0x82000008. [ 1286.750268] iwl3945 0000:03:00.0: Loaded firmware version: 15.32.2.9 [ 1286.750304] iwl3945 0000:03:00.0: Start IWL Error Log Dump: [ 1286.750309] iwl3945 0000:03:00.0: Status: 0x0002A2E4, count: 1 [ 1286.750314] iwl3945 0000:03:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line [ 1286.750543] iwl3945 0000:03:00.0: SYSASSERT (0x5) 0001680217 0x008B6 0x13756 0x00320 0x00000 764 [ 1286.750547] [ 1286.750677] iwl3945 0000:03:00.0: Start IWL Event Log Dump: display last 20 count [ 1286.750720] iwl3945 0000:03:00.0: 0001679867 0x00000001 1106 [ 1286.750746] iwl3945 0000:03:00.0: 0001679867 0x0000000f 1106 [ 1286.750771] iwl3945 0000:03:00.0: 0001679869 0x00000428 1105 [ 1286.750796] iwl3945 0000:03:00.0: 0001679873 0x00000483 1115 [ 1286.750821] iwl3945 0000:03:00.0: 0001679876 0x00000006 0463 [ 1286.750846] iwl3945 0000:03:00.0: 0001679877 0x00000006 0462 [ 1286.750871] iwl3945 0000:03:00.0: 0001680003 0x04130097 0401 [ 1286.750896] iwl3945 0000:03:00.0: 0001680005 0x00000006 0451 [ 1286.750921] iwl3945 0000:03:00.0: 0001680025 0x00000000 0451 [ 1286.750947] iwl3945 0000:03:00.0: 0001680157 0x44140080 0401 [ 1286.750972] iwl3945 0000:03:00.0: 0001680172 0x00000017 0452 [ 1286.750997] iwl3945 0000:03:00.0: 0001680177 0x00113b6e 0450 [ 1286.751023] iwl3945 0000:03:00.0: 0001680182 0x00113b6e 0450 [ 1286.751048] iwl3945 0000:03:00.0: 0001680187 0x00113b6e 0450 [ 1286.751073] iwl3945 0000:03:00.0: 0001680192 0x00113b6e 0450 [ 1286.751098] iwl3945 0000:03:00.0: 0001680197 0x00113b6e 0450 [ 1286.751123] iwl3945 0000:03:00.0: 0001680202 0x00123b6e 0450 [ 1286.751148] iwl3945 0000:03:00.0: 0001680207 0x00123b6e 0450 [ 1286.751173] iwl3945 0000:03:00.0: 0001680213 0x00123b6e 0450 [ 1286.751198] iwl3945 0000:03:00.0: 0001680218 0x00000100 0125 [ 1286.751212] iwl3945 0000:03:00.0: Error Reply type 0x000002FC cmd REPLY_SCAN_CMD (0x80) seq 0x4414 ser 0x00340000 [ 1286.755637] iwl3945 0000:03:00.0: Can't stop Rx DMA. It appears like the configuration that gets sent to wpa_supplicant is TKIP + WPA2 which seems kinda wrong, doesn't WPA2/RSN require CCMP? Dan -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
