Search Linux Wireless

[PATCH 3/3] ath9k_hw: Increase the wait count for nf load.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Increasing the wait count makes the nf load pass in
most of the cases.

Signed-off-by: Vivek Natarajan <vnatarajan@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/calib.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index b4a92a4..8649581 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -262,7 +262,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	 * since 250us often results in NF load timeout and causes deaf
 	 * condition during stress testing 12/12/2009
 	 */
-	for (j = 0; j < 1000; j++) {
+	for (j = 0; j < 10000; j++) {
 		if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
 		     AR_PHY_AGC_CONTROL_NF) == 0)
 			break;
@@ -278,7 +278,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	 * here, the baseband nf cal will just be capped by our present
 	 * noisefloor until the next calibration timer.
 	 */
-	if (j == 1000) {
+	if (j == 10000) {
 		ath_dbg(common, ATH_DBG_ANY,
 			"Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
 			REG_READ(ah, AR_PHY_AGC_CONTROL));
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux