Search Linux Wireless

Re: [PATCH 2.6.38] ath9k: remove support for the FIF_PROMISC_IN_BSS filter flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/08/2011 06:56 PM, Rajkumar Manoharan wrote:
On Wed, Mar 09, 2011 at 06:18:12AM +0530, Felix Fietkau wrote:
The hardware rx filter flag triggered by FIF_PROMISC_IN_BSS is overly broad
and covers even frames with PHY errors. When this flag is enabled, this message
shows up frequently during scanning or hardware resets:

ath: Could not stop RX, we could be confusing the DMA engine when we start RX up

Since promiscuous mode is usually not particularly useful, yet enabled by
default by bridging (either used normally in 4-addr mode, or with hacks
for various virtualization software), we should sacrifice it for better
reliability during normal operation.

This patch leaves it enabled if there are active monitor mode interfaces, since
it's very useful for debugging.

Signed-off-by: Felix Fietkau<nbd@xxxxxxxxxxx>
Cc: stable@xxxxxxxxxx
---
  drivers/net/wireless/ath/ath9k/recv.c |    4 +---
  1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index cb559e3..a9c3f46 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -413,9 +413,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
  	 * mode interface or when in monitor mode. AP mode does not need this
  	 * since it receives all in-BSS frames anyway.
  	 */
-	if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP)&&
-	     (sc->rx.rxfilter&  FIF_PROMISC_IN_BSS)) ||
-	    (sc->sc_ah->is_monitoring))
+	if (sc->sc_ah->is_monitoring)
  		rfilt |= ATH9K_RX_FILTER_PROM;

Assume there are 2 vifs (STA + MON) and both running. Doing a scan on STA vif, dumps dma messages.

Sounds like you got a reproducible test case then!

This patch may be fine, but either way, it is at best making it harder to
hit the DMA issue, not actually fixing the underlying cause.

Thanks,
Ben


--
Rajkumar
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc  http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux