Set different Cox setting between wl127x and wl128x.
Signed-off-by: Shahar Levi <shahar_levi@xxxxxx>
---
drivers/net/wireless/wl12xx/acx.c | 5 +++++
drivers/net/wireless/wl12xx/main.c | 6 +++++-
2 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index f0345e6..e970b71 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -554,6 +554,11 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl)
goto out;
}
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ c->params[CONF_SG_BT_LOAD_RATIO] = 50;
+ else
+ c->params[CONF_SG_BT_LOAD_RATIO] = 200;
+
/* BT-WLAN coext parameters */
for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
param->params[i] = cpu_to_le32(c->params[i]);
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 32d963d..f8e9e3f 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -54,7 +54,11 @@ static struct conf_drv_settings default_conf = {
[CONF_SG_BT_PER_THRESHOLD] = 7500,
[CONF_SG_HV3_MAX_OVERRIDE] = 0,
[CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
- [CONF_SG_BT_LOAD_RATIO] = 50,
+ /*
+ * CONF_SG_BT_LOAD_RATIO has wl127x or wl128x dependency
+ * (set in wl1271_acx_sg_cfg()
+ */
+ [CONF_SG_BT_LOAD_RATIO] = 0,
[CONF_SG_AUTO_PS_MODE] = 1,
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
