I'm using compat-wireless-2011-03-03 and when the brcm80211 module loads at boot up, I'm getting an an error. See dmesg below. uname -a: Linux sheldon-lenovo 2.6.37.2-sheldon-u160lcd-powertop-1 #1 SMP Thu Mar 3 21:22:39 EST 2011 x86_64 Intel(R) Core(TM) i5 CPU U 470 @ 1.33GHz GenuineIntel GNU/Linux lspci -vvn | grep 14e4: 04:00.0 0280: 14e4:4727 (rev 01) Subsystem: 14e4:0510 dmesg: s:agpgart [ 7.502410] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 7.535645] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.552697] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.569634] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.586262] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.602587] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.628262] sd 0:0:0:0: rpm_resume flags 0x4 [ 7.628267] sd 0:0:0:0: rpm_resume returns 1 [ 7.636622] PM: Adding info for No Bus:eth0 [ 7.636970] atl1c 0000:03:00.0: version 1.0.1.0-NAPI [ 7.637932] PM: Adding info for No Bus:BAT0 [ 7.657374] sd 0:0:0:0: rpm_resume flags 0x4 [ 7.657378] sd 0:0:0:0: rpm_resume returns 1 [ 7.658356] sd 0:0:0:0: rpm_resume flags 0x4 [ 7.658363] sd 0:0:0:0: rpm_resume returns 1 [ 7.662671] ACPI: Battery Slot [BAT0] (battery present) [ 7.688581] Compat-wireless backport release: compat-wireless-2011-01-31-25-g9d8e201 [ 7.694075] rtc_cmos 00:06: RTC can wake from S4 [ 7.695249] usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138 [ 7.695253] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.695257] usb 2-1.5: Product: USB2.0-CRW [ 7.695259] usb 2-1.5: Manufacturer: Generic [ 7.695261] usb 2-1.5: SerialNumber: 20090516388200000 [ 7.695382] PM: Adding info for usb:2-1.5 [ 7.695454] usb 2-1.5: rpm_resume flags 0x4 [ 7.695457] usb 2-1.5: rpm_resume returns 1 [ 7.706735] Linux video capture interface: v2.00 [ 7.817342] Backport based on linux-next.git next-20110303 [ 7.818893] PM: Adding info for usb:2-1.5:1.0 [ 7.822530] usb 2-1.5: rpm_resume flags 0x4 [ 7.822533] usb 2-1.5: rpm_resume returns 1 [ 7.822640] scsi8 : usb-storage 2-1.5:1.0 [ 7.822662] PM: Adding info for scsi:host8 [ 7.822716] PM: Adding info for No Bus:host8 [ 7.822808] PM: Adding info for No Bus:ep_01 [ 7.822828] PM: Adding info for No Bus:ep_82 [ 7.822865] PM: Adding info for No Bus:usbdev2.3 [ 7.822915] PM: Adding info for No Bus:ep_00 [ 7.822922] hub 2-1:1.0: rpm_suspend flags 0x0 [ 7.822925] hub 2-1:1.0: rpm_suspend returns 0 [ 7.858372] PM: Adding info for No Bus:rtc0 [ 7.858419] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 7.874227] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 7.898401] brcm80211: module is from the staging directory, the quality is unknown, you have been warned. [ 7.900720] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.931521] usb 1-1.6: rpm_resume flags 0x4 [ 7.931526] usb 1-1.6: rpm_resume returns 1 [ 7.931543] [drm] Initialized drm 1.1.0 20060810 [ 7.931547] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0190) [ 7.971829] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X [ 7.971909] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.973572] PM: Adding info for No Bus:video0 [ 7.973734] PM: Adding info for No Bus:input4 [ 7.973782] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4 [ 7.978551] brcm80211 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.978560] brcm80211 0000:04:00.0: setting latency timer to 64 [ 8.008670] PM: Adding info for No Bus:0000:04:00.0 [ 8.009181] PM: Adding info for No Bus:event4 [ 8.009259] uvcvideo 1-1.6:1.0: rpm_suspend flags 0x0 [ 8.009270] uvcvideo 1-1.6:1.0: rpm_suspend returns 0 [ 8.009401] usbcore: registered new interface driver uvcvideo [ 8.026970] USB Video Class driver (v1.0.0) [ 8.028264] PM: Removing info for No Bus:0000:04:00.0 [ 8.028345] PM: Adding info for No Bus:0000:04:00.0 [ 8.046282] PM: Removing info for No Bus:0000:04:00.0 [ 8.046480] Found chip type AI (0x13814313) [ 8.048297] uvcvideo 1-1.6:1.0: rpm_resume flags 0x4 [ 8.048303] usb 1-1.6: rpm_resume flags 0x0 [ 8.048306] usb 1-1.6: rpm_resume returns 1 [ 8.048311] uvcvideo 1-1.6:1.0: rpm_resume returns 0 [ 8.048451] uvcvideo 1-1.6:1.0: rpm_suspend flags 0x0 [ 8.048458] uvcvideo 1-1.6:1.0: rpm_suspend returns 0 [ 8.067035] Changing max_res_mask to 0xffff [ 8.083136] Changing min_res_mask to 0x200d [ 8.104910] Applying 4313 WARs [ 8.120917] hda_codec: ALC269VB: BIOS auto-probing. [ 8.121379] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x510 macaddr: ac:81:12:3a:59:4f [ 8.121528] ------------[ cut here ]------------ [ 8.121539] WARNING: at /home/sheldon/compat-wireless-2011-03-03/net/wireless/core.c:475 wiphy_register+0x2de/0x340 [cfg80211]() [ 8.121542] Hardware name: 08945LU [ 8.121543] Modules linked in: snd_hda_codec_realtek i915(+) brcm80211(C+) drm_kms_helper uvcvideo drm snd_hda_intel(+) snd_hda_codec mac80211 snd_hwdep snd_pcm videodev rtc_cmos compat i2c_algo_bit v4l1_compat intel_agp v4l2_compat_ioctl32 atl1c acer_wmi rtc_core cfg80211 evdev intel_gtt snd_timer battery i2c_i801 psmouse rtc_lib sg video ac serio_raw snd agpgart shpchp processor thermal btusb i2c_core output wmi button thermal_sys hwmon soundcore snd_page_alloc bluetooth rfkill [ 8.121571] Pid: 1504, comm: modprobe Tainted: G C 2.6.37.2-sheldon-u160lcd-powertop-1 #1 [ 8.121574] Call Trace: [ 8.121586] [<ffffffff8104c2df>] warn_slowpath_common+0x7f/0xc0 [ 8.121590] [<ffffffff8104c33a>] warn_slowpath_null+0x1a/0x20 [ 8.121595] [<ffffffffa026223e>] wiphy_register+0x2de/0x340 [cfg80211] [ 8.121601] [<ffffffff811135f7>] ? __kmalloc+0x127/0x1f0 [ 8.121610] [<ffffffffa02af22f>] ? ieee80211_register_hw+0x9f/0x590 [mac80211] [ 8.121615] [<ffffffffa02af323>] ieee80211_register_hw+0x193/0x590 [mac80211] [ 8.121639] [<ffffffffa03468c5>] wl_pci_probe+0x656/0x7a0 [brcm80211] [ 8.121645] [<ffffffff815f910e>] ? __pm_runtime_set_status+0x12e/0x200 [ 8.121650] [<ffffffff81567a3f>] local_pci_probe+0x5f/0xd0 [ 8.121654] [<ffffffff81568118>] pci_device_probe+0x88/0xb0 [ 8.121659] [<ffffffff815ef53a>] ? driver_sysfs_add+0x7a/0xb0 [ 8.121662] [<ffffffff815ef826>] driver_probe_device+0x96/0x1c0 [ 8.121666] [<ffffffff815ef9fb>] __driver_attach+0xab/0xb0 [ 8.121669] [<ffffffff815ef950>] ? __driver_attach+0x0/0xb0 [ 8.121672] [<ffffffff815ee73e>] bus_for_each_dev+0x5e/0x90 [ 8.121676] [<ffffffff815ef4be>] driver_attach+0x1e/0x20 [ 8.121679] [<ffffffff815eefe5>] bus_add_driver+0xd5/0x2d0 [ 8.121691] [<ffffffffa0159000>] ? wl_module_init+0x0/0x84 [brcm80211] [ 8.121694] [<ffffffff815efc86>] driver_register+0x76/0x140 [ 8.121698] [<ffffffff81072cfd>] ? notifier_call_chain+0x4d/0x70 [ 8.121710] [<ffffffffa0159000>] ? wl_module_init+0x0/0x84 [brcm80211] [ 8.121714] [<ffffffff815683b6>] __pci_register_driver+0x56/0xd0 [ 8.121725] [<ffffffffa0159082>] wl_module_init+0x82/0x84 [brcm80211] [ 8.121729] [<ffffffff81000304>] do_one_initcall+0x44/0x170 [ 8.121733] [<ffffffff81088073>] sys_init_module+0xc3/0x210 [ 8.121736] [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b [ 8.121739] ---[ end trace a8bbcf613a799428 ]--- [ 8.121742] wl_attach: ieee80211_register_hw failed, status -22 [ 8.121744] wl_set_hint: Sending country code US to MAC80211 [ 8.121750] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver 5.75.11 (1.82.8.0) (Compiled in . at 23:11:48 on Mar 3 2011) [ 8.333625] Unable to query Synaptics hardware. [ 9.585913] scsi host8: rpm_resume flags 0x4 [ 9.585918] scsi host8: rpm_resume returns 1 [ 9.585922] scsi host8: rpm_resume flags 0x4 [ 9.585924] scsi host8: rpm_resume returns 1 [ 9.585950] scsi target8:0:0: rpm_resume flags 0x4 [ 9.585952] scsi target8:0:0: rpm_resume returns -11 [ 9.588517] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 9.608744] PM: Adding info for scsi:target8:0:0 [ 9.608797] scsi target8:0:0: rpm_resume flags 0x4 [ 9.608807] scsi target8:0:0: rpm_resume returns 1 [ 9.608815] scsi 8:0:0:0: rpm_resume flags 0x0 [ 9.608823] scsi 8:0:0:0: rpm_resume returns -11 [ 9.608831] scsi 8:0:0:0: rpm_resume flags 0x4 [ 9.608837] scsi 8:0:0:0: rpm_resume returns 1 [ 9.608921] PM: Adding info for scsi:8:0:0:0 [ 9.609042] PM: Adding info for No Bus:8:0:0:0 [ 9.609122] PM: Adding info for No Bus:8:0:0:0 [ 9.609281] PM: Adding info for No Bus:sg1 [ 9.609348] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 9.626102] PM: Adding info for No Bus:8:0:0:0 [ 9.626359] PM: Adding info for No Bus:8:16 [ 9.626407] scsi target8:0:1: rpm_resume flags 0x4 [ 9.626411] scsi target8:0:1: rpm_resume returns -11 [ 9.626425] PM: Adding info for No Bus:sdb [ 9.626488] scsi target8:0:2: rpm_resume flags 0x4 [ 9.626492] scsi target8:0:2: rpm_resume returns -11 [ 9.629268] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 9.631082] scsi target8:0:3: rpm_resume flags 0x4 [ 9.631087] scsi target8:0:3: rpm_resume returns -11 [ 9.631182] scsi target8:0:4: rpm_resume flags 0x4 [ 9.631185] scsi target8:0:4: rpm_resume returns -11 [ 9.631265] scsi target8:0:5: rpm_resume flags 0x4 [ 9.631269] scsi target8:0:5: rpm_resume returns -11 [ 9.631346] scsi target8:0:6: rpm_resume flags 0x4 [ 9.631350] scsi target8:0:6: rpm_resume returns -11 [ 9.631426] scsi target8:0:7: rpm_resume flags 0x4 [ 9.631429] scsi target8:0:7: rpm_resume returns -11 [ 9.634076] sd 8:0:0:0: rpm_resume flags 0x4 [ 9.634084] sd 8:0:0:0: rpm_resume returns 1 [ 9.651826] PM: Adding info for No Bus:card0 [ 9.651895] PM: Adding info for No Bus:pcmC0D7p [ 9.651944] PM: Adding info for No Bus:pcmC0D3p [ 9.651984] PM: Adding info for No Bus:pcmC0D0p [ 9.652024] PM: Adding info for No Bus:pcmC0D0c [ 9.652069] PM: Adding info for No Bus:input5 [ 9.652089] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 9.670934] PM: Adding info for No Bus:event5 [ 9.671018] PM: Adding info for No Bus:input6 [ 9.671052] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 9.690541] PM: Adding info for No Bus:event6 [ 9.690630] PM: Adding info for No Bus:hwC0D3 [ 9.690714] PM: Adding info for No Bus:hwC0D0 [ 9.690809] PM: Adding info for No Bus:controlC0 [ 9.690878] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.706831] i915 0000:00:02.0: setting latency timer to 64 [ 9.708698] PM: Adding info for No Bus:controlD64 [ 9.708886] PM: Adding info for No Bus:card0 [ 9.809793] PM: Adding info for i2c:i2c-0 [ 9.809900] PM: Adding info for i2c:i2c-1 [ 9.809980] PM: Adding info for i2c:i2c-2 [ 9.810019] PM: Adding info for i2c:i2c-3 [ 9.810054] PM: Adding info for i2c:i2c-4 [ 9.810086] PM: Adding info for i2c:i2c-5 [ 9.810119] PM: Adding info for i2c:i2c-6 [ 9.810150] PM: Adding info for i2c:i2c-7 [ 9.810183] PM: Adding info for i2c:i2c-8 [ 9.810214] PM: Adding info for i2c:i2c-9 [ 9.810247] PM: Adding info for i2c:i2c-10 [ 9.810280] PM: Adding info for i2c:i2c-11 [ 9.810313] PM: Adding info for i2c:i2c-12 [ 9.810345] PM: Adding info for i2c:i2c-13 [ 9.810488] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 9.873921] PM: Adding info for No Bus:card0-LVDS-1 [ 9.874043] PM: Adding info for No Bus:card0-VGA-1 [ 9.874131] PM: Adding info for i2c:i2c-14 [ 9.876495] PM: Removing info for i2c:i2c-14 [ 9.876617] PM: Adding info for No Bus:card0-HDMI-A-1 [ 9.876752] PM: Adding info for No Bus:card0-DP-1 [ 9.877851] PM: Adding info for i2c:i2c-14 [ 9.877905] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.885692] usb 1-1.2: rpm_suspend flags 0x1 [ 9.885702] usb 1-1.2: rpm_suspend returns 0 [ 9.885714] usb 1-1.2: rpm_suspend flags 0x2 [ 9.896690] usb 1-1.2: rpm_suspend returns 0 [ 9.933865] checking generic (d0000000 3ff0000) vs hw (d0000000 10000000) [ 9.933875] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 9.935814] Console: switching to colour dummy device 80x25 [ 9.935863] PM: Removing info for No Bus:fb0 [ 9.935995] PM: Removing info for No Bus:vtcon1 [ 9.936469] PM: Adding info for No Bus:fb0 [ 9.936546] PM: Adding info for No Bus:vtcon1 [ 9.991542] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 9.991569] Console: switching to colour frame buffer device 170x48 [ 10.000213] fb0: inteldrmfb frame buffer device [ 10.000279] drm: registered panic notifier [ 10.040598] PM: Adding info for No Bus:acpi_video0 [ 10.044564] PM: Adding info for No Bus:cooling_device4 [ 10.044584] acpi device:07: registered as cooling_device4 [ 10.044663] PM: Adding info for No Bus:acpi_video0 [ 10.045004] PM: Adding info for No Bus:input7 [ 10.045032] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 10.045130] PM: Adding info for No Bus:event7 [ 10.045143] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.045425] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 10.101670] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.101680] sd 0:0:0:0: rpm_resume returns 1 [ 10.103228] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.103231] sd 0:0:0:0: rpm_resume returns 1 [ 10.181761] PM: Adding info for No Bus:input8 [ 10.181805] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 10.181960] PM: Adding info for No Bus:mouse0 [ 10.182022] PM: Adding info for No Bus:event8 [ 10.876482] usb 1-1.6: rpm_suspend flags 0x1 [ 10.876492] usb 1-1.6: rpm_suspend returns 0 [ 10.876508] usb 1-1.6: rpm_suspend flags 0x2 [ 10.887425] usb 1-1.6: rpm_suspend returns 0 [ 13.880726] usb 1-1: rpm_suspend flags 0x1 [ 13.880736] usb 1-1: rpm_suspend returns 0 [ 13.880751] usb 1-1: rpm_suspend flags 0x2 [ 13.891581] usb 1-1: rpm_suspend returns 0 [ 14.276290] Adding 4886304k swap on /dev/sda2. Priority:-1 extents:1 across:4886304k SS [ 14.324217] fuse init (API version 7.15) [ 14.324533] PM: Adding info for No Bus:fuse [ 14.493930] sd 0:0:0:0: rpm_resume flags 0x4 [ 14.493935] sd 0:0:0:0: rpm_resume returns 1 [ 14.494112] EXT4-fs (sda1): re-mounted. Opts: discard [ 14.506894] EXT4-fs (sda1): re-mounted. Opts: discard [ 14.640154] PM: Adding info for platform:parport_pc.956 [ 14.640198] PM: Removing info for platform:parport_pc.956 [ 14.640252] PM: Adding info for platform:parport_pc.888 [ 14.640317] PM: Removing info for platform:parport_pc.888 [ 14.640370] PM: Adding info for platform:parport_pc.632 [ 14.640416] PM: Removing info for platform:parport_pc.632 [ 14.651184] lp: driver loaded but no devices found [ 14.651548] ppdev: user-space parallel port driver [ 16.868825] usb usb1: rpm_suspend flags 0x1 [ 16.868832] usb usb1: rpm_suspend returns 0 [ 16.868851] usb usb1: rpm_suspend flags 0x2 [ 16.868886] usb usb1: rpm_suspend returns 0 [ 17.986047] atl1c 0000:03:00.0: irq 43 for MSI/MSI-X [ 36.538530] NET: Registered protocol family 10 [ 36.538739] lo: Disabled Privacy Extensions [ 36.538858] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.346988] uvcvideo 1-1.6:1.0: rpm_resume flags 0x4 [ 37.346995] usb 1-1.6: rpm_resume flags 0x0 [ 37.346999] usb 1-1: rpm_resume flags 0x0 [ 37.347002] usb usb1: rpm_resume flags 0x0 [ 37.347006] ehci_hcd 0000:00:1a.0: rpm_resume flags 0x0 [ 37.347009] ehci_hcd 0000:00:1a.0: rpm_resume returns 1 [ 37.360282] sd 8:0:0:0: rpm_resume flags 0x4 [ 37.360289] sd 0:0:0:0: rpm_resume flags 0x4 [ 37.360295] sd 0:0:0:0: rpm_resume returns 1 [ 37.360299] sd 8:0:0:0: rpm_resume returns 1 [ 37.360427] sd 0:0:0:0: rpm_resume flags 0x4 [ 37.360431] sd 0:0:0:0: rpm_resume returns 1 [ 37.366480] usb usb1: rpm_resume returns 0 [ 37.366685] hub 1-0:1.0: rpm_resume flags 0x4 [ 37.366690] usb usb1: rpm_resume flags 0x0 [ 37.366694] usb usb1: rpm_resume returns 1 [ 37.366698] hub 1-0:1.0: rpm_resume returns 0 [ 37.366703] hub 1-0:1.0: rpm_suspend flags 0x0 [ 37.366708] hub 1-0:1.0: rpm_suspend returns 0 [ 37.404448] usb 1-1: rpm_resume returns 0 [ 37.404454] hub 1-1:1.0: rpm_resume flags 0x4 [ 37.404458] usb 1-1: rpm_resume flags 0x0 [ 37.404462] usb 1-1: rpm_resume returns 1 [ 37.404466] hub 1-1:1.0: rpm_resume returns 0 [ 37.404470] hub 1-1:1.0: rpm_suspend flags 0x0 [ 37.404473] hub 1-1:1.0: rpm_suspend returns 0 [ 37.442508] usb 1-1.6: rpm_resume returns 0 [ 37.442515] uvcvideo 1-1.6:1.0: rpm_resume returns 0 [ 37.443451] uvcvideo 1-1.6:1.0: rpm_suspend flags 0x0 [ 37.443457] uvcvideo 1-1.6:1.0: rpm_suspend returns 0 [ 38.330993] PM: Adding info for No Bus:mixer [ 38.339935] PM: Adding info for No Bus:dsp [ 38.340010] PM: Adding info for No Bus:audio [ 38.352123] PM: Adding info for No Bus:seq [ 38.360429] PM: Adding info for No Bus:sequencer [ 38.360490] PM: Adding info for No Bus:sequencer2 [ 38.392837] PM: Adding info for No Bus:vcs2 [ 38.392924] PM: Adding info for No Bus:vcsa2 [ 38.393086] PM: Adding info for No Bus:vcs6 [ 38.393152] PM: Adding info for No Bus:vcsa6 [ 38.394528] PM: Adding info for No Bus:vcs4 [ 38.395185] PM: Adding info for No Bus:vcsa4 [ 38.395386] PM: Adding info for No Bus:vcs5 [ 38.395630] PM: Adding info for No Bus:vcsa5 [ 38.396091] PM: Adding info for No Bus:vcs3 [ 38.396376] PM: Adding info for No Bus:vcsa3 [ 39.847330] usb 1-1.6: rpm_suspend flags 0x1 [ 39.847338] usb 1-1.6: rpm_suspend returns 0 [ 39.847352] usb 1-1.6: rpm_suspend flags 0x2 [ 39.858353] usb 1-1.6: rpm_suspend returns 0 [ 42.843519] usb 1-1: rpm_suspend flags 0x1 [ 42.843524] usb 1-1: rpm_suspend returns 0 [ 42.843541] usb 1-1: rpm_suspend flags 0x2 [ 42.854500] usb 1-1: rpm_suspend returns 0 [ 45.839666] usb usb1: rpm_suspend flags 0x1 [ 45.839672] usb usb1: rpm_suspend returns 0 [ 45.839690] usb usb1: rpm_suspend flags 0x2 [ 45.839725] usb usb1: rpm_suspend returns 0 [ 54.133714] sd 8:0:0:0: rpm_resume flags 0x4 [ 54.133720] sd 8:0:0:0: rpm_resume returns 1 [ 54.140876] sd 8:0:0:0: rpm_resume flags 0x4 [ 54.140880] sd 8:0:0:0: rpm_resume returns 1 [ 54.155041] sd 8:0:0:0: rpm_resume flags 0x4 [ 54.155051] sd 8:0:0:0: rpm_resume returns 1 [ 71.113647] sd 8:0:0:0: rpm_resume flags 0x4 [ 71.113653] sd 8:0:0:0: rpm_resume returns 1 [ 88.090778] sd 8:0:0:0: rpm_resume flags 0x4 [ 88.090784] sd 8:0:0:0: rpm_resume returns 1 [ 105.068875] sd 8:0:0:0: rpm_resume flags 0x4 [ 105.068881] sd 8:0:0:0: rpm_resume returns 1 [ 122.047093] sd 8:0:0:0: rpm_resume flags 0x4 [ 122.047106] sd 8:0:0:0: rpm_resume returns 1 [ 139.026140] sd 8:0:0:0: rpm_resume flags 0x4 [ 139.026147] sd 8:0:0:0: rpm_resume returns 1 [ 156.004497] sd 8:0:0:0: rpm_resume flags 0x4 [ 156.004503] sd 8:0:0:0: rpm_resume returns 1 [ 172.982906] sd 8:0:0:0: rpm_resume flags 0x4 [ 172.982912] sd 8:0:0:0: rpm_resume returns 1 [ 189.961148] sd 8:0:0:0: rpm_resume flags 0x4 [ 189.961154] sd 8:0:0:0: rpm_resume returns 1 [ 206.939066] sd 8:0:0:0: rpm_resume flags 0x4 [ 206.939072] sd 8:0:0:0: rpm_resume returns 1 [ 223.906692] sd 8:0:0:0: rpm_resume flags 0x4 [ 223.906698] sd 8:0:0:0: rpm_resume returns 1 [ 240.895763] sd 8:0:0:0: rpm_resume flags 0x4 [ 240.895769] sd 8:0:0:0: rpm_resume returns 1 [ 257.873881] sd 8:0:0:0: rpm_resume flags 0x4 [ 257.873887] sd 8:0:0:0: rpm_resume returns 1 [ 274.852037] sd 8:0:0:0: rpm_resume flags 0x4 [ 274.852043] sd 8:0:0:0: rpm_resume returns 1 [ 291.830138] sd 8:0:0:0: rpm_resume flags 0x4 [ 291.830144] sd 8:0:0:0: rpm_resume returns 1 [ 308.808363] sd 8:0:0:0: rpm_resume flags 0x4 [ 308.808369] sd 8:0:0:0: rpm_resume returns 1 [ 325.775905] sd 8:0:0:0: rpm_resume flags 0x4 [ 325.775910] sd 8:0:0:0: rpm_resume returns 1 [ 342.764997] sd 8:0:0:0: rpm_resume flags 0x4 [ 342.765002] sd 8:0:0:0: rpm_resume returns 1 [ 359.743252] sd 8:0:0:0: rpm_resume flags 0x4 [ 359.743258] sd 8:0:0:0: rpm_resume returns 1 [ 376.721473] sd 8:0:0:0: rpm_resume flags 0x4 [ 376.721478] sd 8:0:0:0: rpm_resume returns 1 [ 393.699733] sd 8:0:0:0: rpm_resume flags 0x4 [ 393.699739] sd 8:0:0:0: rpm_resume returns 1 [ 410.677761] sd 8:0:0:0: rpm_resume flags 0x4 [ 410.677767] sd 8:0:0:0: rpm_resume returns 1 [ 427.645592] sd 8:0:0:0: rpm_resume flags 0x4 [ 427.645598] sd 8:0:0:0: rpm_resume returns 1 [ 444.634851] sd 8:0:0:0: rpm_resume flags 0x4 [ 444.634857] sd 8:0:0:0: rpm_resume returns 1 [ 461.613026] sd 8:0:0:0: rpm_resume flags 0x4 [ 461.613032] sd 8:0:0:0: rpm_resume returns 1 [ 478.591057] sd 8:0:0:0: rpm_resume flags 0x4 [ 478.591063] sd 8:0:0:0: rpm_resume returns 1 [ 495.569289] sd 8:0:0:0: rpm_resume flags 0x4 [ 495.569295] sd 8:0:0:0: rpm_resume returns 1 [ 512.547300] sd 8:0:0:0: rpm_resume flags 0x4 [ 512.547306] sd 8:0:0:0: rpm_resume returns 1 [ 529.525474] sd 8:0:0:0: rpm_resume flags 0x4 [ 529.525487] sd 8:0:0:0: rpm_resume returns 1 [ 546.504608] sd 8:0:0:0: rpm_resume flags 0x4 [ 546.504614] sd 8:0:0:0: rpm_resume returns 1 [ 563.482561] sd 8:0:0:0: rpm_resume flags 0x4 [ 563.482567] sd 8:0:0:0: rpm_resume returns 1 [ 580.460784] sd 8:0:0:0: rpm_resume flags 0x4 [ 580.460790] sd 8:0:0:0: rpm_resume returns 1 [ 597.439008] sd 8:0:0:0: rpm_resume flags 0x4 [ 597.439014] sd 8:0:0:0: rpm_resume returns 1 [ 614.416871] sd 8:0:0:0: rpm_resume flags 0x4 [ 614.416877] sd 8:0:0:0: rpm_resume returns 1 [ 631.384723] sd 8:0:0:0: rpm_resume flags 0x4 [ 631.384728] sd 8:0:0:0: rpm_resume returns 1 [ 648.373963] sd 8:0:0:0: rpm_resume flags 0x4 [ 648.373969] sd 8:0:0:0: rpm_resume returns 1 [ 665.352152] sd 8:0:0:0: rpm_resume flags 0x4 [ 665.352158] sd 8:0:0:0: rpm_resume returns 1 [ 682.330149] sd 8:0:0:0: rpm_resume flags 0x4 [ 682.330154] sd 8:0:0:0: rpm_resume returns 1 [ 699.308373] sd 8:0:0:0: rpm_resume flags 0x4 [ 699.308379] sd 8:0:0:0: rpm_resume returns 1 [ 716.286432] sd 8:0:0:0: rpm_resume flags 0x4 [ 716.286438] sd 8:0:0:0: rpm_resume returns 1 [ 733.264639] sd 8:0:0:0: rpm_resume flags 0x4 [ 733.264644] sd 8:0:0:0: rpm_resume returns 1 [ 750.243910] sd 8:0:0:0: rpm_resume flags 0x4 [ 750.243916] sd 8:0:0:0: rpm_resume returns 1 [ 767.222015] sd 8:0:0:0: rpm_resume flags 0x4 [ 767.222021] sd 8:0:0:0: rpm_resume returns 1 [ 784.200360] sd 8:0:0:0: rpm_resume flags 0x4 [ 784.200366] sd 8:0:0:0: rpm_resume returns 1 [ 801.178534] sd 8:0:0:0: rpm_resume flags 0x4 [ 801.178540] sd 8:0:0:0: rpm_resume returns 1 [ 818.156482] sd 8:0:0:0: rpm_resume flags 0x4 [ 818.156487] sd 8:0:0:0: rpm_resume returns 1 [ 835.134217] sd 8:0:0:0: rpm_resume flags 0x4 [ 835.134222] sd 8:0:0:0: rpm_resume returns 1 [ 852.113334] sd 8:0:0:0: rpm_resume flags 0x4 [ 852.113340] sd 8:0:0:0: rpm_resume returns 1 [ 869.091383] sd 8:0:0:0: rpm_resume flags 0x4 [ 869.091388] sd 8:0:0:0: rpm_resume returns 1 [ 886.069438] sd 8:0:0:0: rpm_resume flags 0x4 [ 886.069444] sd 8:0:0:0: rpm_resume returns 1 [ 903.047432] sd 8:0:0:0: rpm_resume flags 0x4 [ 903.047439] sd 8:0:0:0: rpm_resume returns 1 [ 920.026447] sd 8:0:0:0: rpm_resume flags 0x4 [ 920.026453] sd 8:0:0:0: rpm_resume returns 1 [ 937.003830] sd 8:0:0:0: rpm_resume flags 0x4 [ 937.003843] sd 8:0:0:0: rpm_resume returns 1 [ 953.983071] sd 8:0:0:0: rpm_resume flags 0x4 [ 953.983076] sd 8:0:0:0: rpm_resume returns 1 [ 970.961017] sd 8:0:0:0: rpm_resume flags 0x4 [ 970.961023] sd 8:0:0:0: rpm_resume returns 1 [ 987.939006] sd 8:0:0:0: rpm_resume flags 0x4 [ 987.939012] sd 8:0:0:0: rpm_resume returns 1 [ 1004.917008] sd 8:0:0:0: rpm_resume flags 0x4 [ 1004.917014] sd 8:0:0:0: rpm_resume returns 1 [ 1021.896125] sd 8:0:0:0: rpm_resume flags 0x4 [ 1021.896130] sd 8:0:0:0: rpm_resume returns 1 [ 1038.873427] sd 8:0:0:0: rpm_resume flags 0x4 [ 1038.873439] sd 8:0:0:0: rpm_resume returns 1 [ 1055.852432] sd 8:0:0:0: rpm_resume flags 0x4 [ 1055.852438] sd 8:0:0:0: rpm_resume returns 1 [ 1072.830616] sd 8:0:0:0: rpm_resume flags 0x4 [ 1072.830621] sd 8:0:0:0: rpm_resume returns 1 [ 1089.808787] sd 8:0:0:0: rpm_resume flags 0x4 [ 1089.808792] sd 8:0:0:0: rpm_resume returns 1 [ 1106.786818] sd 8:0:0:0: rpm_resume flags 0x4 [ 1106.786823] sd 8:0:0:0: rpm_resume returns 1 [ 1123.764909] sd 8:0:0:0: rpm_resume flags 0x4 [ 1123.764915] sd 8:0:0:0: rpm_resume returns 1 [ 1140.732898] sd 8:0:0:0: rpm_resume flags 0x4 [ 1140.732904] sd 8:0:0:0: rpm_resume returns 1 [ 1157.722173] sd 8:0:0:0: rpm_resume flags 0x4 [ 1157.722178] sd 8:0:0:0: rpm_resume returns 1 [ 1174.700496] sd 8:0:0:0: rpm_resume flags 0x4 [ 1174.700502] sd 8:0:0:0: rpm_resume returns 1 [ 1191.678373] sd 8:0:0:0: rpm_resume flags 0x4 [ 1191.678379] sd 8:0:0:0: rpm_resume returns 1 [ 1208.656500] sd 8:0:0:0: rpm_resume flags 0x4 [ 1208.656506] sd 8:0:0:0: rpm_resume returns 1 [ 1225.634527] sd 8:0:0:0: rpm_resume flags 0x4 [ 1225.634532] sd 8:0:0:0: rpm_resume returns 1 [ 1242.602069] sd 8:0:0:0: rpm_resume flags 0x4 [ 1242.602076] sd 8:0:0:0: rpm_resume returns 1 [ 1259.591251] sd 8:0:0:0: rpm_resume flags 0x4 [ 1259.591257] sd 8:0:0:0: rpm_resume returns 1 [ 1276.569682] sd 8:0:0:0: rpm_resume flags 0x4 [ 1276.569688] sd 8:0:0:0: rpm_resume returns 1 [ 1293.547856] sd 8:0:0:0: rpm_resume flags 0x4 [ 1293.547862] sd 8:0:0:0: rpm_resume returns 1 [ 1310.526259] sd 8:0:0:0: rpm_resume flags 0x4 [ 1310.526264] sd 8:0:0:0: rpm_resume returns 1 [ 1327.504255] sd 8:0:0:0: rpm_resume flags 0x4 [ 1327.504261] sd 8:0:0:0: rpm_resume returns 1 [ 1344.472135] sd 8:0:0:0: rpm_resume flags 0x4 [ 1344.472140] sd 8:0:0:0: rpm_resume returns 1 [ 1361.461341] sd 8:0:0:0: rpm_resume flags 0x4 [ 1361.461347] sd 8:0:0:0: rpm_resume returns 1 [ 1374.774686] hub 2-1:1.0: rpm_resume flags 0x4 [ 1374.774692] usb 2-1: rpm_resume flags 0x0 [ 1374.774695] usb 2-1: rpm_resume returns 1 [ 1374.774699] hub 2-1:1.0: rpm_resume returns 0 [ 1374.952451] usb 2-1.3: new high speed USB device using ehci_hcd and address 4 [ 1375.037345] usb 2-1.3: rpm_resume flags 0x0 [ 1375.037349] usb 2-1.3: rpm_resume returns -11 [ 1375.083154] usb 2-1.3: New USB device found, idVendor=1307, idProduct=0165 [ 1375.083159] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1375.083163] usb 2-1.3: Product: USB Mass Storage Device [ 1375.083166] usb 2-1.3: Manufacturer: USBest Technology [ 1375.083169] usb 2-1.3: SerialNumber: 1001095703c1c5 [ 1375.083292] PM: Adding info for usb:2-1.3 [ 1375.083340] usb 2-1.3: rpm_resume flags 0x4 [ 1375.083344] usb 2-1.3: rpm_resume returns 1 [ 1375.083545] PM: Adding info for usb:2-1.3:1.0 [ 1375.083603] usb 2-1.3: rpm_resume flags 0x4 [ 1375.083608] usb 2-1.3: rpm_resume returns 1 [ 1375.083691] scsi9 : usb-storage 2-1.3:1.0 [ 1375.083730] PM: Adding info for scsi:host9 [ 1375.083805] PM: Adding info for No Bus:host9 [ 1375.083915] PM: Adding info for No Bus:ep_01 [ 1375.083966] PM: Adding info for No Bus:ep_82 [ 1375.084022] PM: Adding info for No Bus:ep_83 [ 1375.084073] PM: Adding info for No Bus:usbdev2.4 [ 1375.084187] PM: Adding info for No Bus:ep_00 [ 1375.084194] hub 2-1:1.0: rpm_suspend flags 0x0 [ 1375.084200] hub 2-1:1.0: rpm_suspend returns 0 [ 1376.082056] scsi host9: rpm_resume flags 0x4 [ 1376.082062] scsi host9: rpm_resume returns 1 [ 1376.082066] scsi host9: rpm_resume flags 0x4 [ 1376.082069] scsi host9: rpm_resume returns 1 [ 1376.082092] scsi target9:0:0: rpm_resume flags 0x4 [ 1376.082095] scsi target9:0:0: rpm_resume returns -11 [ 1376.082831] scsi 9:0:0:0: Direct-Access EDGE DiskGO 0.00 PQ: 0 ANSI: 2 [ 1376.082871] PM: Adding info for scsi:target9:0:0 [ 1376.082899] scsi target9:0:0: rpm_resume flags 0x4 [ 1376.082903] scsi target9:0:0: rpm_resume returns 1 [ 1376.082907] scsi 9:0:0:0: rpm_resume flags 0x0 [ 1376.082911] scsi 9:0:0:0: rpm_resume returns -11 [ 1376.082915] scsi 9:0:0:0: rpm_resume flags 0x4 [ 1376.082918] scsi 9:0:0:0: rpm_resume returns 1 [ 1376.082965] PM: Adding info for scsi:9:0:0:0 [ 1376.083056] PM: Adding info for No Bus:9:0:0:0 [ 1376.083109] PM: Adding info for No Bus:9:0:0:0 [ 1376.083214] PM: Adding info for No Bus:sg2 [ 1376.083292] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 1376.083360] PM: Adding info for No Bus:9:0:0:0 [ 1376.083491] scsi target9:0:1: rpm_resume flags 0x4 [ 1376.083496] scsi target9:0:1: rpm_resume returns -11 [ 1376.084106] sd 9:0:0:0: [sdc] 1974272 512-byte logical blocks: (1.01 GB/964 MiB) [ 1376.084258] scsi target9:0:2: rpm_resume flags 0x4 [ 1376.084269] scsi target9:0:2: rpm_resume returns -11 [ 1376.084796] sd 9:0:0:0: [sdc] Write Protect is off [ 1376.084810] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 1376.084819] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 1376.084949] PM: Adding info for No Bus:8:32 [ 1376.085111] PM: Adding info for No Bus:sdc [ 1376.085155] sd 9:0:0:0: rpm_resume flags 0x4 [ 1376.085165] sd 9:0:0:0: rpm_resume returns 1 [ 1376.085307] scsi target9:0:3: rpm_resume flags 0x4 [ 1376.085316] scsi target9:0:3: rpm_resume returns -11 [ 1376.085710] scsi target9:0:4: rpm_resume flags 0x4 [ 1376.085721] scsi target9:0:4: rpm_resume returns -11 [ 1376.086867] scsi target9:0:5: rpm_resume flags 0x4 [ 1376.086878] scsi target9:0:5: rpm_resume returns -11 [ 1376.087101] scsi target9:0:6: rpm_resume flags 0x4 [ 1376.087110] scsi target9:0:6: rpm_resume returns -11 [ 1376.087501] scsi target9:0:7: rpm_resume flags 0x4 [ 1376.087511] scsi target9:0:7: rpm_resume returns -11 [ 1376.088027] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 1376.208120] sdc: [ 1376.209769] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 1376.209775] sd 9:0:0:0: [sdc] Attached SCSI removable disk [ 1376.214278] sd 9:0:0:0: rpm_resume flags 0x4 [ 1376.214288] sd 9:0:0:0: rpm_resume returns 1 [ 1376.480136] sd 9:0:0:0: rpm_resume flags 0x4 [ 1376.480146] sd 9:0:0:0: rpm_resume returns 1 [ 1376.541638] sd 9:0:0:0: rpm_resume flags 0x4 [ 1376.541651] sd 9:0:0:0: rpm_resume returns 1 [ 1378.424051] sd 8:0:0:0: rpm_resume flags 0x4 [ 1378.424057] sd 8:0:0:0: rpm_resume returns 1 [ 1386.390044] sd 9:0:0:0: rpm_resume flags 0x4 [ 1386.390054] sd 9:0:0:0: rpm_resume returns 1 [ 1386.646615] sd 9:0:0:0: rpm_resume flags 0x4 [ 1386.646625] sd 9:0:0:0: rpm_resume returns 1 [ 1393.419914] sd 9:0:0:0: rpm_resume flags 0x4 [ 1393.419919] sd 9:0:0:0: rpm_resume returns 1 [ 1393.425800] sd 9:0:0:0: rpm_resume flags 0x4 [ 1393.425810] sd 9:0:0:0: rpm_resume returns 1 [ 1395.401383] sd 9:0:0:0: rpm_resume flags 0x4 [ 1395.401393] sd 9:0:0:0: rpm_resume returns 1 [ 1395.417517] sd 8:0:0:0: rpm_resume flags 0x4 [ 1395.417526] sd 8:0:0:0: rpm_resume returns 1 [ 1395.453914] sd 9:0:0:0: rpm_resume flags 0x4 [ 1395.453923] sd 9:0:0:0: rpm_resume returns 1 [ 1410.397791] sd 9:0:0:0: rpm_resume flags 0x4 [ 1410.397797] sd 9:0:0:0: rpm_resume returns 1 [ 1412.396280] sd 8:0:0:0: rpm_resume flags 0x4 [ 1412.396285] sd 8:0:0:0: rpm_resume returns 1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
