From: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
Newer devices like rt2800* own a hardware sequence counter and thus
don't need to use a software sequence counter at all. Add a new driver
flag to shortcut the software sequence number generation on devices that
don't need it.
rt61pci, rt73usb and rt2800* seem to make use of a hw sequence counter
while rt2400pci and rt2500* need to do it in software.
Signed-off-by: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
Acked-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 1 +
drivers/net/wireless/rt2x00/rt2500pci.c | 1 +
drivers/net/wireless/rt2x00/rt2500usb.c | 1 +
drivers/net/wireless/rt2x00/rt2x00.h | 1 +
drivers/net/wireless/rt2x00/rt2x00queue.c | 11 +++++++----
5 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 2725f3c..d38acf4 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1641,6 +1641,7 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
*/
__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 3ef1fb4..b00e4d4 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1959,6 +1959,7 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
*/
__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 01f385d..b71df29 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1795,6 +1795,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
}
__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 391669b..be4d4cd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -662,6 +662,7 @@ enum rt2x00_flags {
DRIVER_REQUIRE_L2PAD,
DRIVER_REQUIRE_TXSTATUS_FIFO,
DRIVER_REQUIRE_TASKLET_CONTEXT,
+ DRIVER_REQUIRE_SW_SEQNO,
/*
* Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index b32ca31..eebb564 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -224,10 +224,14 @@ static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
return;
+ __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+
+ if (!test_bit(DRIVER_REQUIRE_SW_SEQNO, &entry->queue->rt2x00dev->flags))
+ return;
+
/*
- * Hardware should insert sequence counter.
- * FIXME: We insert a software sequence counter first for
- * hardware that doesn't support hardware sequence counting.
+ * The hardware is not able to insert a sequence number. Assign a
+ * software generated one here.
*
* This is wrong because beacons are not getting sequence
* numbers assigned properly.
@@ -245,7 +249,6 @@ static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
spin_unlock_irqrestore(&intf->seqlock, irqflags);
- __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
}
static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
