From: George <george0505@xxxxxxxxxxx>
Add the rtlwifi/rtl8192cu routines for dm.c, fw.c, led.c and sw.c.
Where possible, these routines use the corresponding code in rtl8192ce.
Signed-off-by: George <george0505@xxxxxxxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
Index: wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/dm.c
===================================================================
--- /dev/null
+++ wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/dm.c
@@ -0,0 +1,118 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+
+#include "../rtl8192c/dm_common.c"
+
+void rtl92c_dm_dynamic_txpower(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ long undecorated_smoothed_pwdb;
+
+ if (!rtlpriv->dm.dynamic_txpower_enable)
+ return;
+
+ if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+ return;
+ }
+
+ if ((mac->link_state < MAC80211_LINKED) &&
+ (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+ ("Not connected to any\n"));
+
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+
+ rtlpriv->dm.last_dtp_lvl = TXHIGHPWRLEVEL_NORMAL;
+ return;
+ }
+
+ if (mac->link_state >= MAC80211_LINKED) {
+ if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("AP Client PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.undecorated_smoothed_pwdb;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("STA Default Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ }
+ } else {
+ undecorated_smoothed_pwdb =
+ rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("AP Ext Port PWDB = 0x%lx\n",
+ undecorated_smoothed_pwdb));
+ }
+
+ if (undecorated_smoothed_pwdb >= TX_POWER_NEAR_FIELD_THRESH_LVL2) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_LEVEL1;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("TXHIGHPWRLEVEL_LEVEL1 (TxPwr=0x0)\n"));
+ } else if ((undecorated_smoothed_pwdb <
+ (TX_POWER_NEAR_FIELD_THRESH_LVL2 - 3)) &&
+ (undecorated_smoothed_pwdb >=
+ TX_POWER_NEAR_FIELD_THRESH_LVL1)) {
+
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_LEVEL1;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("TXHIGHPWRLEVEL_LEVEL1 (TxPwr=0x10)\n"));
+ } else if (undecorated_smoothed_pwdb <
+ (TX_POWER_NEAR_FIELD_THRESH_LVL1 - 5)) {
+ rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("TXHIGHPWRLEVEL_NORMAL\n"));
+ }
+
+ if ((rtlpriv->dm.dynamic_txhighpower_lvl != rtlpriv->dm.last_dtp_lvl)) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("PHY_SetTxPowerLevel8192S() Channel = %d\n",
+ rtlphy->current_channel));
+ rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
+ }
+
+ rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
+}
+
+
Index: wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/fw.c
===================================================================
--- /dev/null
+++ wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/fw.c
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../rtl8192ce/fw.c"
+
+
Index: wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/led.c
===================================================================
--- /dev/null
+++ wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/led.c
@@ -0,0 +1,143 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../usb.h"
+#include "reg.h"
+#include "led.h"
+
+static void _rtl92cu_init_led(struct ieee80211_hw *hw,
+ struct rtl_led *pled, enum rtl_led_pin ledpin)
+{
+ pled->hw = hw;
+ pled->ledpin = ledpin;
+ pled->ledon = false;
+}
+
+static void _rtl92cu_deInit_led(struct rtl_led *pled)
+{
+}
+
+void rtl92cu_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+ u8 ledcfg;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+ ("LedAddr:%X ledpin=%d\n", REG_LEDCFG2, pled->ledpin));
+ ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
+ switch (pled->ledpin) {
+ case LED_PIN_GPIO0:
+ break;
+ case LED_PIN_LED0:
+ rtl_write_byte(rtlpriv,
+ REG_LEDCFG2, (ledcfg & 0xf0) | BIT(5) | BIT(6));
+ break;
+ case LED_PIN_LED1:
+ rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+ pled->ledon = true;
+}
+
+void rtl92cu_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ u8 ledcfg;
+
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+ ("LedAddr:%X ledpin=%d\n", REG_LEDCFG2, pled->ledpin));
+ ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
+ switch (pled->ledpin) {
+ case LED_PIN_GPIO0:
+ break;
+ case LED_PIN_LED0:
+ ledcfg &= 0xf0;
+ if (usbpriv->ledctl.led_opendrain == true)
+ rtl_write_byte(rtlpriv, REG_LEDCFG2,
+ (ledcfg | BIT(1) | BIT(5) | BIT(6)));
+ else
+ rtl_write_byte(rtlpriv, REG_LEDCFG2,
+ (ledcfg | BIT(3) | BIT(5) | BIT(6)));
+ break;
+ case LED_PIN_LED1:
+ ledcfg &= 0x0f;
+ rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+ pled->ledon = false;
+}
+
+void rtl92cu_init_sw_leds(struct ieee80211_hw *hw)
+{
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ _rtl92cu_init_led(hw, &(usbpriv->ledctl.sw_led0), LED_PIN_LED0);
+ _rtl92cu_init_led(hw, &(usbpriv->ledctl.sw_led1), LED_PIN_LED1);
+}
+
+void rtl92cu_deinit_sw_leds(struct ieee80211_hw *hw)
+{
+ struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
+ _rtl92cu_deInit_led(&(usbpriv->ledctl.sw_led0));
+ _rtl92cu_deInit_led(&(usbpriv->ledctl.sw_led1));
+}
+
+static void _rtl92cu_sw_led_control(struct ieee80211_hw *hw,
+ enum led_ctl_mode ledaction)
+{
+}
+
+void rtl92cu_led_control(struct ieee80211_hw *hw,
+ enum led_ctl_mode ledaction)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
+ (ledaction == LED_CTL_TX ||
+ ledaction == LED_CTL_RX ||
+ ledaction == LED_CTL_SITE_SURVEY ||
+ ledaction == LED_CTL_LINK ||
+ ledaction == LED_CTL_NO_LINK ||
+ ledaction == LED_CTL_START_TO_LINK ||
+ ledaction == LED_CTL_POWER_ON)) {
+ return;
+ }
+ RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n",
+ ledaction));
+ _rtl92cu_sw_led_control(hw, ledaction);
+}
+
Index: wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
===================================================================
--- /dev/null
+++ wireless-testing/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -0,0 +1,329 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../usb.h"
+#include "../efuse.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "mac.h"
+#include "dm.h"
+#include "sw.h"
+#include "trx.h"
+#include "led.h"
+#include "hw.h"
+
+
+MODULE_AUTHOR("Georgia <georgia@xxxxxxxxxxx>");
+MODULE_AUTHOR("Ziv Huang <ziv_huang@xxxxxxxxxxx>");
+MODULE_AUTHOR("Larry Finger <Larry.Finger@xxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8192C/8188C 802.11n USB wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin");
+
+static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->dm.dm_initialgain_enable = 1;
+ rtlpriv->dm.dm_flag = 0;
+ rtlpriv->dm.disable_framebursting = 0;
+ rtlpriv->dm.thermalvalue = 0;
+ rtlpriv->rtlhal.pfirmware = vmalloc(0x4000);
+ if (!rtlpriv->rtlhal.pfirmware) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Can't alloc buffer for fw.\n"));
+ return 1;
+ }
+ return 0;
+}
+
+static void rtl92cu_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->rtlhal.pfirmware) {
+ vfree(rtlpriv->rtlhal.pfirmware);
+ rtlpriv->rtlhal.pfirmware = NULL;
+ }
+}
+
+static struct rtl_hal_ops rtl8192cu_hal_ops = {
+ .init_sw_vars = rtl92cu_init_sw_vars,
+ .deinit_sw_vars = rtl92cu_deinit_sw_vars,
+ .read_chip_version = rtl92c_read_chip_version,
+ .read_eeprom_info = rtl92cu_read_eeprom_info,
+ .enable_interrupt = rtl92c_enable_interrupt,
+ .disable_interrupt = rtl92c_disable_interrupt,
+ .hw_init = rtl92cu_hw_init,
+ .hw_disable = rtl92cu_card_disable,
+ .set_network_type = rtl92cu_set_network_type,
+ .set_chk_bssid = rtl92cu_set_check_bssid,
+ .set_qos = rtl92c_set_qos,
+ .set_bcn_reg = rtl92cu_set_beacon_related_registers,
+ .set_bcn_intv = rtl92cu_set_beacon_interval,
+ .update_interrupt_mask = rtl92cu_update_interrupt_mask,
+ .get_hw_reg = rtl92cu_get_hw_reg,
+ .set_hw_reg = rtl92cu_set_hw_reg,
+ .update_rate_table = rtl92cu_update_hal_rate_table,
+ .update_rate_mask = rtl92cu_update_hal_rate_mask,
+ .fill_tx_desc = rtl92cu_tx_fill_desc,
+ .fill_fake_txdesc = rtl92cu_fill_fake_txdesc,
+ .fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc,
+ .cmd_send_packet = rtl92cu_cmd_send_packet,
+ .query_rx_desc = rtl92cu_rx_query_desc,
+ .set_channel_access = rtl92cu_update_channel_access_setting,
+ .radio_onoff_checking = rtl92cu_gpio_radio_on_off_checking,
+ .set_bw_mode = rtl92c_phy_set_bw_mode,
+ .switch_channel = rtl92c_phy_sw_chnl,
+ .dm_watchdog = rtl92c_dm_watchdog,
+ .scan_operation_backup = rtl92c_phy_scan_operation_backup,
+ .set_rf_power_state = rtl92c_phy_set_rf_power_state,
+ .led_control = rtl92cu_led_control,
+ .enable_hw_sec = rtl92cu_enable_hw_security_config,
+ .set_key = rtl92c_set_key,
+ .init_sw_leds = rtl92cu_init_sw_leds,
+ .deinit_sw_leds = rtl92cu_deinit_sw_leds,
+ .get_bbreg = rtl92c_phy_query_bb_reg,
+ .set_bbreg = rtl92c_phy_set_bb_reg,
+ .get_rfreg = rtl92c_phy_query_rf_reg,
+ .set_rfreg = rtl92c_phy_set_rf_reg,
+};
+
+static struct rtl_mod_params rtl92cu_mod_params = {
+ .sw_crypto = 0,
+};
+
+static struct rtl_hal_usbint_cfg rtl92cu_interface_cfg = {
+ /* rx */
+ .in_ep_num = RTL92C_USB_BULK_IN_NUM,
+ .rx_urb_num = RTL92C_NUM_RX_URBS,
+ .rx_max_size = RTL92C_SIZE_MAX_RX_BUFFER,
+ .usb_rx_hdl = rtl8192cu_rx_hdl,
+ .usb_rx_segregate_hdl = NULL, /* rtl8192c_rx_segregate_hdl; */
+ /* tx */
+ .usb_tx_cleanup = rtl8192c_tx_cleanup,
+ .usb_tx_post_hdl = rtl8192c_tx_post_hdl,
+ .usb_tx_aggregate_hdl = rtl8192c_tx_aggregate_hdl,
+ /* endpoint mapping */
+ .usb_endpoint_mapping = rtl8192cu_endpoint_mapping,
+ .usb_mq_to_hwq = rtl8192cu_mq_to_hwq,
+};
+
+static struct rtl_hal_cfg rtl92cu_hal_cfg = {
+ .name = "rtl92c_usb",
+ .fw_name = "rtlwifi/rtl8192cufw.bin",
+ .ops = &rtl8192cu_hal_ops,
+ .mod_params = &rtl92cu_mod_params,
+ .usb_interface_cfg = &rtl92cu_interface_cfg,
+
+ .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+ .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+ .maps[SYS_CLK] = REG_SYS_CLKR,
+ .maps[MAC_RCR_AM] = AM,
+ .maps[MAC_RCR_AB] = AB,
+ .maps[MAC_RCR_ACRC32] = ACRC32,
+ .maps[MAC_RCR_ACF] = ACF,
+ .maps[MAC_RCR_AAP] = AAP,
+
+ .maps[EFUSE_TEST] = REG_EFUSE_TEST,
+ .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+ .maps[EFUSE_CLK] = 0,
+ .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+ .maps[EFUSE_PWC_EV12V] = PWC_EV12V,
+ .maps[EFUSE_FEN_ELDR] = FEN_ELDR,
+ .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
+ .maps[EFUSE_ANA8M] = EFUSE_ANA8M,
+ .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
+ .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
+ .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
+
+ .maps[RWCAM] = REG_CAMCMD,
+ .maps[WCAMI] = REG_CAMWRITE,
+ .maps[RCAMO] = REG_CAMREAD,
+ .maps[CAMDBG] = REG_CAMDBG,
+ .maps[SECR] = REG_SECCFG,
+ .maps[SEC_CAM_NONE] = CAM_NONE,
+ .maps[SEC_CAM_WEP40] = CAM_WEP40,
+ .maps[SEC_CAM_TKIP] = CAM_TKIP,
+ .maps[SEC_CAM_AES] = CAM_AES,
+ .maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+ .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+ .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+ .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+ .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+ .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+ .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+ .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
+ .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+ .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+ .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+ .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+ .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+ .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+ .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+ .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
+ .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
+
+ .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+ .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+ .maps[RTL_IMR_BcnInt] = IMR_BCNINT,
+ .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+ .maps[RTL_IMR_RDU] = IMR_RDU,
+ .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+ .maps[RTL_IMR_BDOK] = IMR_BDOK,
+ .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+ .maps[RTL_IMR_TBDER] = IMR_TBDER,
+ .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+ .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+ .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+ .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+ .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+ .maps[RTL_IMR_VODOK] = IMR_VODOK,
+ .maps[RTL_IMR_ROK] = IMR_ROK,
+ .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
+
+ .maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M,
+ .maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M,
+ .maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M,
+ .maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M,
+ .maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M,
+ .maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M,
+ .maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M,
+ .maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M,
+ .maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M,
+ .maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M,
+ .maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M,
+ .maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M,
+ .maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7,
+ .maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
+};
+
+#define USB_VENDER_ID_REALTEK 0x0bda
+
+/* 2010-10-19 DID_USB_V3.4 */
+static struct usb_device_id rtl8192c_usb_ids[] = {
+
+ /*=== Realtek demoboard ===*/
+ /* Default ID */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8191, rtl92cu_hal_cfg)},
+
+ /****** 8188CU ********/
+ /* 8188CE-VAU USB minCard */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8170, rtl92cu_hal_cfg)},
+ /* 8188cu 1*1 dongle */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8176, rtl92cu_hal_cfg)},
+ /* 8188cu 1*1 dongle, (b/g mode only) */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8177, rtl92cu_hal_cfg)},
+ /* 8188cu Slim Solo */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817a, rtl92cu_hal_cfg)},
+ /* 8188cu Slim Combo */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817b, rtl92cu_hal_cfg)},
+ /* 8188RU High-power USB Dongle */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)},
+ /* 8188CE-VAU USB minCard (b/g mode only) */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)},
+ /* 8188 Combo for BC4 */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)},
+
+ /****** 8192CU ********/
+ /* 8191cu 1*2 */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8177, rtl92cu_hal_cfg)},
+ /* 8192cu 2*2 */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817b, rtl92cu_hal_cfg)},
+ /* 8192CE-VAU USB minCard */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817c, rtl92cu_hal_cfg)},
+
+ /*=== Customer ID ===*/
+ /****** 8188CU ********/
+ {RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
+ {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
+ {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
+ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
+ {RTL_USB_DEVICE(0x0Df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+ {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
+ /* HP - Lite-On ,8188CUS Slim Combo */
+ {RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
+ {RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/
+ {RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/
+ {RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/
+ {RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/
+ {RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/
+ {RTL_USB_DEVICE(0x3358, 0x13d3, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
+ /* Russian customer -Azwave (8188CE-VAU b/g mode only) */
+ {RTL_USB_DEVICE(0x3359, 0x13d3, rtl92cu_hal_cfg)},
+
+ /****** 8192CU ********/
+ {RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/
+ {RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
+ {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
+ {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Abocom -Abocom*/
+ {RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
+ {RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
+ {RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
+ {RTL_USB_DEVICE(0x2019, 0xab2b, rtl92cu_hal_cfg)}, /*Planex -Abocom*/
+ {RTL_USB_DEVICE(0x7392, 0x7822, rtl92cu_hal_cfg)}, /*Edimax -Edimax*/
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8192c_usb_ids);
+
+static struct usb_driver rtl8192cu_driver = {
+ .name = "rtl8192cu",
+ .probe = rtl_usb_probe,
+ .disconnect = rtl_usb_disconnect,
+ .id_table = rtl8192c_usb_ids,
+
+#ifdef CONFIG_PM
+ /* .suspend = rtl_usb_suspend, */
+ /* .resume = rtl_usb_resume, */
+ /* .reset_resume = rtl8192c_resume, */
+#endif /* CONFIG_PM */
+#ifdef CONFIG_AUTOSUSPEND
+ .supports_autosuspend = 1,
+#endif
+};
+
+static int __init rtl8192cu_init(void)
+{
+ return usb_register(&rtl8192cu_driver);
+}
+
+static void __exit rtl8192cu_exit(void)
+{
+ usb_deregister(&rtl8192cu_driver);
+}
+
+module_init(rtl8192cu_init);
+module_exit(rtl8192cu_exit);
+
+
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
