On Tue, Feb 15, 2011 at 12:50:02PM +0100, Johannes Berg wrote: > On Tue, 2011-02-15 at 12:34 +0100, Stanislaw Gruszka wrote: > > > Today I tried to reproduce problem a few times with > > patch applied and does not see dma warning. Also > > iptables modules still unload fine. > > > > However during testing, I triggered different warning: > > > > WARNING: at lib/debugobjects.c:259 debug_print_object+0x5c/0x70() > > Hardware name: HP xw8600 Workstation > > ODEBUG: free active (active state 0) object type: timer_list > > Pid: 9139, comm: rmmod Not tainted 2.6.38-rc4-wl+ #21 > > Call Trace: > > [<ffffffff810649cf>] ? warn_slowpath_common+0x7f/0xc0 > > [<ffffffff81064ac6>] ? warn_slowpath_fmt+0x46/0x50 > > [<ffffffff81226eec>] ? debug_print_object+0x5c/0x70 > > [<ffffffff81227585>] ? debug_check_no_obj_freed+0x125/0x210 > > [<ffffffff8109ebd7>] ? debug_check_no_locks_freed+0xf7/0x170 > > [<ffffffff81156092>] ? kfree+0xc2/0x2f0 > > > [<ffffffffa02a5188>] ? ieee80211_unregister_hw+0x58/0x120 [mac80211] > > > It looks more like mac80211 issue for me. > > Agree, but I wish the timer objects had a name so we'd know what it > was ... hmm, how can we figure out which timer this is? By patching kernel :-) http://people.redhat.com/sgruszka/debugobj-add-timer-name.patch It's ifmgd->conn_mon_timer, seems we only deauthenticate but not dissassociate when down interface, full dmesg below. Stanislaw Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.38-rc4-wl+ (stasiu@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.5 20110116 (Red Hat 4.4.5-5) (GCC) ) #22 SMP Tue Feb 15 10:44:03 CET 2011 Command line: ro root=UUID=b40ec0c6-d616-4407-8be6-d3c381cc575e rhgb KEYTABLE=us selinux=0 pcie_aspm=off LANG=C crashkernel=256M BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000096400 (usable) BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffc2840 (usable) BIOS-e820: 00000000cffc2840 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI 2.5 present. DMI: 0A98h/HP xw8600 Workstation, BIOS 786F5 v01.32 10/15/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E7FFF write-protect E8000-EFFFF write-back F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0130000000 mask 3FF0000000 uncachable 1 base 00D0000000 mask 3FF0000000 uncachable 2 base 00E0000000 mask 3FE0000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xcffc2 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000fe700] fe700 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cffc2000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cffc2000 page 4k kernel direct mapping tables up to cffc2000 @ 1fffa000-20000000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ cffbc000-cffc2000 RAMDISK: 36b08000 - 37ff0000 Reserving 256MB of memory at 608MB for crashkernel (System RAM: 4864MB) ACPI: RSDP 00000000000e9810 00024 (v02 HPQOEM) ACPI: XSDT 00000000cffc52ec 0005C (v01 HPQOEM SLIC-WKS 20081015 00000000) ACPI: FACP 00000000cffc5494 000F4 (v03 HPQOEM SEABURG 00000001 00000000) ACPI Error: 32/64X address mismatch in Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20110112/tbfadt-427) ACPI: DSDT 00000000cffc5a7a 026A4 (v01 HPQOEM DSDT 00000001 MSFT 0100000E) ACPI: FACS 00000000cffc5200 00040 ACPI: SSDT 00000000cffc811e 06DC0 (v01 HPQOEM PROJECT 00000001 MSFT 0100000E) ACPI: APIC 00000000cffc5588 000D4 (v01 HPQOEM SEABURG 00000001 00000000) ACPI: ASF! 00000000cffc565c 0006A (v32 HPQOEM SEABURG 00000001 00000000) ACPI: MCFG 00000000cffc585e 0003C (v01 HPQOEM SEABURG 00000001 00000000) ACPI: HPET 00000000cffc5a10 00038 (v01 HPQOEM SEABURG 00000001 00000000) ACPI: TCPA 00000000cffc5a48 00032 (v01 HPQOEM SEABURG 00000001 00000000) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000130000000 Initmem setup node 0 0000000000000000-0000000130000000 NODE_DATA [000000012ffd9000 - 000000012fffffff] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x00000096 0: 0x00000100 -> 0x000cffc2 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048392 DMA zone: 56 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3912 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833530 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0a] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47 ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48]) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 88 PM: Registered nosave memory: 0000000000096000 - 0000000000097000 PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 PM: Registered nosave memory: 00000000cffc2000 - 00000000cffc3000 PM: Registered nosave memory: 00000000cffc3000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 478 pages/cpu @ffff8800cee00000 s1925760 r8192 d23936 u2097152 pcpu-alloc: s1925760 r8192 d23936 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031362 Policy zone: Normal Kernel command line: ro root=UUID=b40ec0c6-d616-4407-8be6-d3c381cc575e rhgb KEYTABLE=us selinux=0 pcie_aspm=off LANG=C crashkernel=256M PCIe ASPM is disabled PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Memory: 3743100k/4980736k available (4750k kernel code, 787168k absent, 450468k reserved, 4417k data, 3472k init) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:262400 nr_irqs:1560 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 16 of 16 active objects replaced hpet clockevent registered Fast TSC calibration using PIT Detected 3166.815 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6333.63 BogoMIPS (lpj=3166815) pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20110112 ftrace: allocating 17594 entries in 69 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 0a Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 lockdep: fixing up alternatives. Booting Node 0, Processors #1lockdep: fixing up alternatives. #2lockdep: fixing up alternatives. #3 Brought up 4 CPUs Total of 4 processors activated (25333.61 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: SSDT 00000000cffd0d0a 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143) ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880127332168), AE_ALREADY_EXISTS (20110112/psparse-536) ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed003ff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci 0000:00:00.0: [8086:4003] type 0 class 0x000600 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: [8086:4021] type 1 class 0x000604 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: [8086:4023] type 1 class 0x000604 pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: [8086:4025] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:09.0: [8086:4029] type 1 class 0x000604 pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:10.0: [8086:4030] type 0 class 0x000600 pci 0000:00:10.1: [8086:4030] type 0 class 0x000600 pci 0000:00:10.2: [8086:4030] type 0 class 0x000600 pci 0000:00:10.3: [8086:4030] type 0 class 0x000600 pci 0000:00:10.4: [8086:4030] type 0 class 0x000600 pci 0000:00:11.0: [8086:4031] type 0 class 0x000600 pci 0000:00:15.0: [8086:4035] type 0 class 0x000600 pci 0000:00:15.1: [8086:4035] type 0 class 0x000600 pci 0000:00:16.0: [8086:4036] type 0 class 0x000600 pci 0000:00:16.1: [8086:4036] type 0 class 0x000600 pci 0000:00:1b.0: [8086:269a] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xf3700000-0xf3703fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:2692] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x3000-0x301f] pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x3020-0x303f] pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] pci 0000:00:1d.3: [8086:268b] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0x3060-0x307f] pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xf3704000-0xf37043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601 pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101 pci 0000:00:1f.1: reg 10: [io 0x30d0-0x30d7] pci 0000:00:1f.1: reg 14: [io 0x30f0-0x30f3] pci 0000:00:1f.1: reg 18: [io 0x30d8-0x30df] pci 0000:00:1f.1: reg 1c: [io 0x30f4-0x30f7] pci 0000:00:1f.1: reg 20: [io 0x30c0-0x30cf] pci 0000:00:1f.2: [8086:2682] type 0 class 0x000104 pci 0000:00:1f.2: reg 10: [io 0x30e0-0x30e7] pci 0000:00:1f.2: reg 14: [io 0x30f8-0x30fb] pci 0000:00:1f.2: reg 18: [io 0x30e8-0x30ef] pci 0000:00:1f.2: reg 1c: [io 0x30fc-0x30ff] pci 0000:00:1f.2: reg 20: [io 0x3080-0x309f] pci 0000:00:1f.2: reg 24: [mem 0xf3704400-0xf37047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:80:00.0: [8086:4235] type 0 class 0x000280 pci 0000:80:00.0: reg 10: [mem 0xf3900000-0xf3901fff 64bit] pci 0000:80:00.0: PME# supported from D0 D3hot D3cold pci 0000:80:00.0: PME# disabled pci 0000:00:01.0: PCI bridge to [bus 80-80] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xf3900000-0xf39fffff] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:a0:00.0: [8086:422b] type 0 class 0x000280 pci 0000:a0:00.0: reg 10: [mem 0xf3800000-0xf3801fff 64bit] pci 0000:a0:00.0: PME# supported from D0 D3hot D3cold pci 0000:a0:00.0: PME# disabled pci 0000:00:03.0: PCI bridge to [bus a0-a0] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:03.0: bridge window [mem 0xf3800000-0xf38fffff] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:60:00.0: [10de:042f] type 0 class 0x000300 pci 0000:60:00.0: reg 10: [mem 0xf2000000-0xf2ffffff] pci 0000:60:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:60:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit] pci 0000:60:00.0: reg 24: [io 0x1000-0x107f] pci 0000:60:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:05.0: PCI bridge to [bus 60-60] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf2ffffff] pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:10:00.0: [8086:3500] type 1 class 0x000604 pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:10:00.3: [8086:350c] type 1 class 0x000604 pci 0000:10:00.3: PME# supported from D0 D3hot D3cold pci 0000:10:00.3: PME# disabled pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:09.0: PCI bridge to [bus 10-40] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] pci 0000:00:09.0: bridge window [mem 0xf3000000-0xf33fffff] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:1e:00.0: [8086:3510] type 1 class 0x000604 pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold pci 0000:1e:00.0: PME# disabled pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:1e:01.0: [8086:3514] type 1 class 0x000604 pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold pci 0000:1e:01.0: PME# disabled pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:10:00.0: PCI bridge to [bus 1e-40] pci 0000:10:00.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:10:00.0: bridge window [mem 0xf3000000-0xf31fffff] pci 0000:10:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:20:00.0: [8086:4229] type 0 class 0x000280 pci 0000:20:00.0: reg 10: [mem 0xf3100000-0xf3101fff 64bit] pci 0000:20:00.0: PME# supported from D0 D3hot D3cold pci 0000:20:00.0: PME# disabled pci 0000:1e:00.0: PCI bridge to [bus 20-20] pci 0000:1e:00.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:1e:00.0: bridge window [mem 0xf3100000-0xf31fffff] pci 0000:1e:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:40:00.0: [168c:002a] type 0 class 0x000280 pci 0000:40:00.0: reg 10: [mem 0xf3000000-0xf300ffff 64bit] pci 0000:40:00.0: supports D1 pci 0000:40:00.0: PME# supported from D0 D1 D3hot pci 0000:40:00.0: PME# disabled pci 0000:40:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:1e:01.0: PCI bridge to [bus 40-40] pci 0000:1e:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:1e:01.0: bridge window [mem 0xf3000000-0xf30fffff] pci 0000:1e:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:11:06.0: [1000:0054] type 0 class 0x000100 pci 0000:11:06.0: reg 10: [io 0x2000-0x20ff] pci 0000:11:06.0: reg 14: [mem 0xf3210000-0xf3213fff 64bit] pci 0000:11:06.0: reg 1c: [mem 0xf3200000-0xf320ffff 64bit] pci 0000:11:06.0: reg 30: [mem 0x00000000-0x001fffff pref] pci 0000:11:06.0: supports D1 D2 pci 0000:10:00.3: PCI bridge to [bus 11-11] pci 0000:10:00.3: bridge window [io 0x2000-0x2fff] pci 0000:10:00.3: bridge window [mem 0xf3200000-0xf32fffff] pci 0000:10:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0e:00.0: [14e4:167b] type 0 class 0x000200 pci 0000:0e:00.0: reg 10: [mem 0xf3500000-0xf350ffff 64bit] pci 0000:0e:00.0: PME# supported from D3hot D3cold pci 0000:0e:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 0e-0e] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf35fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:0f:00.0: [14e4:167b] type 0 class 0x000200 pci 0000:0f:00.0: reg 10: [mem 0xf3400000-0xf340ffff 64bit] pci 0000:0f:00.0: PME# supported from D3hot D3cold pci 0000:0f:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 0f-0f] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00 pci 0000:01:05.0: reg 10: [mem 0xf3604000-0xf36047ff] pci 0000:01:05.0: reg 14: [mem 0xf3600000-0xf3603fff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:05.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xf3600000-0xf36fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH9.MUPP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH9.MUPP.PTE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH9.MUPP.PTE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH9.PCIX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143) ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880127332168), AE_ALREADY_EXISTS (20110112/psparse-536) ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. vgaarb: device added: PCI:0000:60:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 0000000000096400 - 000000000009ffff reserve RAM buffer: 00000000cffc2840 - 00000000cfffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #3 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0xd0000000-0xdfffffff window] pnp 00:00: [mem 0xf0000000-0xfebfffff window] pnp 00:00: [mem 0xfed00000-0xfed003ff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [bus 00-ff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfec88000-0xfec880ff] pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:02: [mem 0xfec89000-0xfec890ff] pnp 00:02: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0061] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] pnp 00:08: [irq 1] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: [irq 4] pnp 00:09: [io 0x03f8-0x03ff] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) pnp 00:0a: [irq 6] pnp 00:0a: [dma 2] pnp 00:0a: [io 0x03f0-0x03f5] pnp 00:0a: [io 0x03f7] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:0b: [mem 0xfec00000-0xfec00fff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:0c: [mem 0xfed00000-0xfed003ff] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:0d: [io 0x0010-0x001f] pnp 00:0d: [io 0x0050-0x0053] pnp 00:0d: [io 0x0072-0x0077] pnp 00:0d: [io 0x0090-0x009f] pnp 00:0d: [io 0x04d0-0x04d1] system 00:0d: [io 0x04d0-0x04d1] has been reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0e: [io 0x0400-0x041f] pnp 00:0e: [io 0x0420-0x043f] pnp 00:0e: [io 0x0440-0x045f] pnp 00:0e: [io 0x0460-0x047f] pnp 00:0e: [io 0x0480-0x048f] pnp 00:0e: [io 0x0490-0x049f] pnp 00:0e: [io 0xf800-0xf81f] pnp 00:0e: [io 0xf820-0xf83f] pnp 00:0e: [io 0xf840-0xf85f] pnp 00:0e: [io 0xf860-0xf87f] pnp 00:0e: [io 0xfa00-0xfa3f] pnp 00:0e: [io 0xfc00-0xfc7f] pnp 00:0e: [io 0xfc80-0xfcff] pnp 00:0e: [io 0xfe00-0xfe7f] pnp 00:0e: [io 0xfe80-0xfeff] system 00:0e: [io 0x0400-0x041f] has been reserved system 00:0e: [io 0x0420-0x043f] has been reserved system 00:0e: [io 0x0440-0x045f] has been reserved system 00:0e: [io 0x0460-0x047f] has been reserved system 00:0e: [io 0x0480-0x048f] has been reserved system 00:0e: [io 0x0490-0x049f] has been reserved system 00:0e: [io 0xf800-0xf81f] has been reserved system 00:0e: [io 0xf820-0xf83f] has been reserved system 00:0e: [io 0xf840-0xf85f] has been reserved system 00:0e: [io 0xf860-0xf87f] has been reserved system 00:0e: [io 0xfa00-0xfa3f] has been reserved system 00:0e: [io 0xfc00-0xfc7f] has been reserved system 00:0e: [io 0xfc80-0xfcff] has been reserved system 00:0e: [io 0xfe00-0xfe7f] has been reserved system 00:0e: [io 0xfe80-0xfeff] has been reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0f: [mem 0xfed1c000-0xfed1ffff] pnp 00:0f: [mem 0xffe00000-0xffffffff] pnp 00:0f: [mem 0xfee00000-0xfeefffff] pnp 00:0f: [mem 0xfe700000-0xfe7003ff] pnp 00:0f: [mem 0xfe600000-0xfe6fffff] pnp 00:0f: [mem 0xfe000000-0xfe01ffff] system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0f: [mem 0xffe00000-0xffffffff] has been reserved system 00:0f: [mem 0xfee00000-0xfeefffff] has been reserved system 00:0f: [mem 0xfe700000-0xfe7003ff] has been reserved system 00:0f: [mem 0xfe600000-0xfe6fffff] has been reserved system 00:0f: [mem 0xfe000000-0xfe01ffff] has been reserved system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:10: [mem 0x00000000-0x0009ffff] pnp 00:10: [mem 0x000c0000-0x000e7fff] pnp 00:10: [mem 0x000e8000-0x000effff] pnp 00:10: [mem 0x000f0000-0x000fffff] pnp 00:10: [mem 0x00100000-0xcfffffff] pnp 00:10: [mem 0xfeda0000-0xfedbffff] pnp 00:10: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref] pnp 00:10: disabling [mem 0x000c0000-0x000e7fff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref] pnp 00:10: disabling [mem 0x000e8000-0x000effff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref] pnp 00:10: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref] pnp 00:10: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x001fffff pref] system 00:10: [mem 0xfeda0000-0xfedbffff] has been reserved system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:11: [mem 0xe0000000-0xefffffff] system 00:11: [mem 0xe0000000-0xefffffff] has been reserved system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 18 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:09.0: BAR 15: assigned [mem 0xf3a00000-0xf3bfffff pref] pci 0000:00:01.0: PCI bridge to [bus 80-80] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xf3900000-0xf39fffff] pci 0000:00:01.0: bridge window [mem pref disabled] pci 0000:00:03.0: PCI bridge to [bus a0-a0] pci 0000:00:03.0: bridge window [io disabled] pci 0000:00:03.0: bridge window [mem 0xf3800000-0xf38fffff] pci 0000:00:03.0: bridge window [mem pref disabled] pci 0000:60:00.0: BAR 6: can't assign mem pref (size 0x20000) pci 0000:00:05.0: PCI bridge to [bus 60-60] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf2ffffff] pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:10:00.3: BAR 15: assigned [mem 0xf3a00000-0xf3bfffff pref] pci 0000:1e:00.0: PCI bridge to [bus 20-20] pci 0000:1e:00.0: bridge window [io disabled] pci 0000:1e:00.0: bridge window [mem 0xf3100000-0xf31fffff] pci 0000:1e:00.0: bridge window [mem pref disabled] pci 0000:1e:01.0: PCI bridge to [bus 40-40] pci 0000:1e:01.0: bridge window [io disabled] pci 0000:1e:01.0: bridge window [mem 0xf3000000-0xf30fffff] pci 0000:1e:01.0: bridge window [mem pref disabled] pci 0000:10:00.0: PCI bridge to [bus 1e-40] pci 0000:10:00.0: bridge window [io disabled] pci 0000:10:00.0: bridge window [mem 0xf3000000-0xf31fffff] pci 0000:10:00.0: bridge window [mem pref disabled] pci 0000:11:06.0: BAR 6: assigned [mem 0xf3a00000-0xf3bfffff pref] pci 0000:10:00.3: PCI bridge to [bus 11-11] pci 0000:10:00.3: bridge window [io 0x2000-0x2fff] pci 0000:10:00.3: bridge window [mem 0xf3200000-0xf32fffff] pci 0000:10:00.3: bridge window [mem 0xf3a00000-0xf3bfffff pref] pci 0000:00:09.0: PCI bridge to [bus 10-40] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] pci 0000:00:09.0: bridge window [mem 0xf3000000-0xf33fffff] pci 0000:00:09.0: bridge window [mem 0xf3a00000-0xf3bfffff pref] pci 0000:00:1c.0: PCI bridge to [bus 0e-0e] pci 0000:00:1c.0: bridge window [io disabled] pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf35fffff] pci 0000:00:1c.0: bridge window [mem pref disabled] pci 0000:00:1c.1: PCI bridge to [bus 0f-0f] pci 0000:00:1c.1: bridge window [io disabled] pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff] pci 0000:00:1c.1: bridge window [mem pref disabled] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0xf3600000-0xf36fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:05.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:09.0: setting latency timer to 64 pci 0000:10:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:10:00.0: setting latency timer to 64 pci 0000:1e:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:1e:00.0: setting latency timer to 64 pci 0000:1e:01.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 pci 0000:1e:01.0: setting latency timer to 64 pci 0000:10:00.3: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 5 [mem 0xd0000000-0xdfffffff] pci_bus 0000:00: resource 6 [mem 0xf0000000-0xfebfffff] pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 10 [io 0x0d00-0xffff] pci_bus 0000:80: resource 1 [mem 0xf3900000-0xf39fffff] pci_bus 0000:a0: resource 1 [mem 0xf3800000-0xf38fffff] pci_bus 0000:60: resource 0 [io 0x1000-0x1fff] pci_bus 0000:60: resource 1 [mem 0xf0000000-0xf2ffffff] pci_bus 0000:60: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:10: resource 0 [io 0x2000-0x2fff] pci_bus 0000:10: resource 1 [mem 0xf3000000-0xf33fffff] pci_bus 0000:10: resource 2 [mem 0xf3a00000-0xf3bfffff pref] pci_bus 0000:1e: resource 1 [mem 0xf3000000-0xf31fffff] pci_bus 0000:20: resource 1 [mem 0xf3100000-0xf31fffff] pci_bus 0000:40: resource 1 [mem 0xf3000000-0xf30fffff] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff] pci_bus 0000:11: resource 1 [mem 0xf3200000-0xf32fffff] pci_bus 0000:11: resource 2 [mem 0xf3a00000-0xf3bfffff pref] pci_bus 0000:0e: resource 1 [mem 0xf3500000-0xf35fffff] pci_bus 0000:0f: resource 1 [mem 0xf3400000-0xf34fffff] pci_bus 0000:01: resource 1 [mem 0xf3600000-0xf36fffff] pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 5 [mem 0xd0000000-0xdfffffff] pci_bus 0000:01: resource 6 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 7 [mem 0xfed00000-0xfed003ff] pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff] pci_bus 0000:01: resource 9 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 10 [io 0x0d00-0xffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 6, 393216 bytes) UDP-Lite hash table entries: 2048 (order: 6, 393216 bytes) NET: Registered protocol family 1 pci 0000:00:1f.0: rerouting interrupts for [8086:2670] pci 0000:60:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 21408k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800cae00000 - ffff8800cee00000 software IO TLB at phys 0xcae00000 - 0xcee00000 audit: initializing netlink socket (disabled) type=2000 audit(1297767133.022:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7352 cryptomgr_test used greatest stack depth: 6600 bytes left cryptomgr_test used greatest stack depth: 6424 bytes left Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 88 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 89 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x2220 intel_idle: does not run on family 6 model 23 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 brd: module loaded loop: module loaded Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf3704000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.38-rc4-wl+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.38-rc4-wl+ uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.38-rc4-wl+ uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.38-rc4-wl+ uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.38-rc4-wl+ uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:05: setting system clock to 2011-02-15 10:52:14 UTC (1297767134) Initalizing network drop monitor service Freeing unused kernel memory: 3472k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 mknod used greatest stack depth: 5392 bytes left mkdir used greatest stack depth: 5040 bytes left dracut: dracut-004-36.el6 udev: starting version 147 udevd (72): /proc/72/oom_adj is deprecated, please use /proc/72/oom_score_adj instead. [drm] Initialized drm 1.1.0 20060810 nouveau 0000:60:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 nouveau 0000:60:00.0: setting latency timer to 64 [drm] nouveau 0000:60:00.0: Detected an NV50 generation card (0x086f00a2) [drm] nouveau 0000:60:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:60:00.0: ... appears to be valid [drm] nouveau 0000:60:00.0: BIT BIOS found [drm] nouveau 0000:60:00.0: Bios version 60.86.63.00 [drm] nouveau 0000:60:00.0: TMDS table version 2.0 [drm] nouveau 0000:60:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:60:00.0: Raw DCB entry 0: 02011300 00000028 [drm] nouveau 0000:60:00.0: Raw DCB entry 1: 01011302 00000010 [drm] nouveau 0000:60:00.0: Raw DCB entry 2: 01000310 00000028 [drm] nouveau 0000:60:00.0: Raw DCB entry 3: 02000312 00000010 [drm] nouveau 0000:60:00.0: Raw DCB entry 4: 0000000e 00000000 [drm] nouveau 0000:60:00.0: DCB connector table: VHER 0x40 5 14 2 [drm] nouveau 0000:60:00.0: 0: 0x00002030: type 0x30 idx 0 tag 0x08 [drm] nouveau 0000:60:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07 [drm] nouveau 0000:60:00.0: Parsing VBIOS init table 0 at offset 0xBD9C usb 4-1: new low speed USB device using uhci_hcd and address 2 [drm] nouveau 0000:60:00.0: Parsing VBIOS init table 1 at offset 0xC106 [drm] nouveau 0000:60:00.0: Parsing VBIOS init table 2 at offset 0xCD47 [drm] nouveau 0000:60:00.0: Parsing VBIOS init table 3 at offset 0xCE39 [drm] nouveau 0000:60:00.0: Parsing VBIOS init table 4 at offset 0xD033 [drm] nouveau 0000:60:00.0: Parsing VBIOS init table at offset 0xD098 [drm] nouveau 0000:60:00.0: 0xD098: Condition still not met after 20ms, skipping following opcodes Refined TSC clocksource calibration: 3166.778 MHz. Switching to clocksource tsc usb 4-1: New USB device found, idVendor=03f0, idProduct=2c24 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: HP USB Laser Mouse usb 4-1: Manufacturer: HP input: HP HP USB Laser Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3 generic-usb 0003:03F0:2C24.0001: input,hidraw0: USB HID v1.10 Mouse [HP HP USB Laser Mouse] on usb-0000:00:1d.2-1/input0 [drm] nouveau 0000:60:00.0: 2 available performance level(s) [drm] nouveau 0000:60:00.0: 0: memory 100MHz core 208MHz shader 416MHz fanspeed 100% [drm] nouveau 0000:60:00.0: 1: memory 400MHz core 459MHz shader 918MHz fanspeed 100% [drm] nouveau 0000:60:00.0: c: memory 399MHz core 459MHz shader 918MHz [TTM] Zone kernel: Available graphics memory: 1883990 kiB. [TTM] Initializing pool allocator. [drm] nouveau 0000:60:00.0: Detected 256MiB VRAM [drm] nouveau 0000:60:00.0: 512 MiB GART (aperture) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] nouveau 0000:60:00.0: allocated 1680x1050 fb: 0x60000000, bo ffff88011bdf1710 fbcon: nouveaufb (fb0) is primary device Console: switching to colour frame buffer device 210x65 fb0: nouveaufb frame buffer device drm: registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:60:00.0 on minor 0 modprobe used greatest stack depth: 3680 bytes left dracut: Starting plymouth daemon FDC 0 is a post-1991 82077 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 ata2: port disabled. ignoring. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata3: SATA max UDMA/133 abar m1024@0xf3704400 port 0xf3704500 irq 19 ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 ata5: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 19 ata6: SATA max UDMA/133 abar m1024@0xf3704400 port 0xf3704680 irq 19 ata7: SATA max UDMA/133 abar m1024@0xf3704400 port 0xf3704700 irq 19 ata8: SATA max UDMA/133 abar m1024@0xf3704400 port 0xf3704780 irq 19 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: ST3250410AS, 3.AHC, max UDMA/100 ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA ST3250410AS 3.AH PQ: 0 ANSI: 5 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATAPI: ATAPI DVD A DH16A6L, ZH37, max UDMA/100 ata4.00: ATA-7: ST3250410AS, 3.AHC, max UDMA/100 ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata5.00: configured for UDMA/100 ata4.00: configured for UDMA/100 scsi 3:0:0:0: Direct-Access ATA ST3250410AS 3.AH PQ: 0 ANSI: 5 scsi 4:0:0:0: CD-ROM ATAPI DVD A DH16A6L ZH37 PQ: 0 ANSI: 5 Fusion MPT base driver 3.04.17 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SAS Host driver 3.04.17 mptsas 0000:11:06.0: PCI INT A -> GSI 62 (level, low) -> IRQ 62 mptbase: ioc0: Initiating bringup ioc0: LSISAS1068 B1: Capabilities={Initiator} scsi8 : ioc0: LSISAS1068 B1, FwRev=01160100h, Ports=1, MaxQ=286, IRQ=62 firewire_ohci 0000:01:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sdb2 sdb3 sdb4 sd 3:0:0:0: [sdb] Attached SCSI disk sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 firewire_core: created device fw0: GUID 0060b000002a1d25, S400 EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) dracut: Mounted root filesystem /dev/sdb1 dracut: Switching root readahead: starting udev: starting version 147 WARNING! power/level is deprecated; use power/control instead usb_id used greatest stack depth: 3664 bytes left cfg80211: Calling CRDA to update world regulatory domain iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:80:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 iwlagn 0000:80:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 ip used greatest stack depth: 3360 bytes left iwlagn 0000:80:00.0: device EEPROM VER=0x11f, CALIB=0x4 iwlagn 0000:80:00.0: Device SKU: 0Xb iwlagn 0000:80:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:80:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:80:00.0: irq 90 for MSI/MSI-X iwlagn 0000:a0:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 iwlagn 0000:a0:00.0: setting latency timer to 64 iwlagn 0000:a0:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:a0:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:a0:00.0: Device SKU: 0Xb iwlagn 0000:a0:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:a0:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:a0:00.0: irq 91 for MSI/MSI-X iwlagn 0000:20:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 iwlagn 0000:20:00.0: setting latency timer to 64 iwlagn 0000:20:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 iwlagn 0000:20:00.0: device EEPROM VER=0x36, CALIB=0x5 iwlagn 0000:20:00.0: Device SKU: 0Xb iwlagn 0000:20:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:20:00.0: irq 92 for MSI/MSI-X shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 iwlagn 0000:20:00.0: loaded firmware version 228.61.2.24 Registered led device: phy2-led iwlagn 0000:a0:00.0: loaded firmware version 9.176.4.1 build 15835 Registered led device: phy1-led tg3.c:v3.116 (December 3, 2010) tg3 0000:0e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:0e:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: loaded firmware version 8.24.2.12 Registered led device: phy0-led tg3 0000:0e:00.0: eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:23:7d:53:64:71 tg3 0000:0e:00.0: eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) tg3 0000:0e:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:0e:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] tg3 0000:0f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:0f:00.0: setting latency timer to 64 tg3 0000:0f:00.0: eth1: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:23:7d:53:64:70 tg3 0000:0f:00.0: eth1: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) tg3 0000:0f:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:0f:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit] udev: renamed network interface eth0 to eth0-eth1 udev: renamed network interface eth1 to eth2 udev: renamed network interface eth0-eth1 to eth1 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. microcode: CPU0 sig=0x1067a, pf=0x40, revision=0xa07 microcode: CPU1 sig=0x1067a, pf=0x40, revision=0xa07 ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs' ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' microcode: CPU2 sig=0x1067a, pf=0x40, revision=0xa07 ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' microcode: CPU3 sig=0x1067a, pf=0x40, revision=0xa07 udev: renamed network interface wlan0 to wlan0-wlan2 udev: renamed network interface wlan1 to wlan3 microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba udev: renamed network interface wlan2 to wlan1 microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28 microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28 udev: renamed network interface wlan0-wlan2 to wlan2 wmi: Mapper loaded sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 sr 4:0:0:0: Attached scsi generic sg2 type 5 input: HP WMI hotkeys as /devices/virtual/input/input4 cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx EXT4-fs (sdb1): re-mounted. Opts: (null) EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with ordered data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-0): using internal journal EXT3-fs (dm-0): mounted filesystem with ordered data mode Adding 6094844k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:6094844k Adding 16008768k swap on /dev/sdb3. Priority:-2 extents:1 across:16008768k NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan3: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready tg3 0000:0e:00.0: irq 93 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth1: link is not ready tg3 0000:0f:00.0: irq 94 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth2: link is not ready fuse init (API version 7.16) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready padlock_aes: VIA PadLock not detected. wlan2: no IPv6 routers present wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3e (try 1) wlan3: authenticated wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan3: waiting for beacon from 00:23:69:35:d1:3e wlan3: beacon received wlan3: associate with 00:23:69:35:d1:3e (try 1) wlan3: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan3: associated ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready wlan3: no IPv6 routers present wlan1: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3e (try 1) wlan1: authenticated wlan1: waiting for beacon from 00:23:69:35:d1:3e wlan1: beacon received wlan1: associate with 00:23:69:35:d1:3e (try 1) wlan1: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=3) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready wlan1: no IPv6 routers present iwlagn 0000:80:00.0: Aggregation not enabled for tid 0 because load = 1 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting iwlagn 0000:80:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting iwlagn 0000:80:00.0: queue number out of range: 0, must be 10 to 19 wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting iwlagn 0000:80:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 wlan1: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan1: direct probe to 00:23:69:35:d1:3f (try 1/3) wlan1: direct probe to 00:23:69:35:d1:3f (try 2/3) wlan1: direct probe to 00:23:69:35:d1:3f (try 3/3) wlan1: direct probe responded wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting iwlagn 0000:80:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting iwlagn 0000:80:00.0: queue number out of range: 0, must be 10 to 19 wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) tg3 0000:0e:00.0: PME# enabled tg3 0000:0e:00.0: wake-up capability enabled by ACPI tg3 0000:0f:00.0: PME# enabled tg3 0000:0f:00.0: wake-up capability enabled by ACPI ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan3: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready tg3 0000:0e:00.0: irq 93 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth1: link is not ready tg3 0000:0f:00.0: irq 94 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth2: link is not ready wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready wlan3: authenticate with 00:23:69:35:d1:3f (try 1) wlan3: authenticate with 00:23:69:35:d1:3f (try 2) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3f (try 1) wlan3: associate with 00:23:69:35:d1:3f (try 2) wlan3: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=2) wlan3: associated ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3f (try 1) wlan2: authenticated wlan2: waiting for beacon from 00:23:69:35:d1:3f wlan2: beacon received wlan2: associate with 00:23:69:35:d1:3f (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=3) wlan2: associated wlan2: no IPv6 routers present wlan1: no IPv6 routers present wlan3: no IPv6 routers present wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:20:00.0: Received BA when not expected iwlagn 0000:20:00.0: Received BA when not expected iwlagn 0000:20:00.0: Received BA when not expected iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Failing on timeout while stopping DMA channel 1 [0x07fd0003] iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting iwlagn 0000:20:00.0: queue number out of range: 0, must be 7 to 14 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Failing on timeout while stopping DMA channel 1 [0x07fd0002] iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Failing on timeout while stopping DMA channel 1 [0x07fd0003] iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting iwlagn 0000:20:00.0: queue number out of range: 0, must be 7 to 14 iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:20:00.0: Received BA when not expected wlan2: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan2: associated iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Failing on timeout while stopping DMA channel 1 [0x07fd0003] iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting iwlagn 0000:20:00.0: queue number out of range: 0, must be 7 to 14 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:20:00.0: Error sending TX power (-5) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:20:00.0: Attempting to modify non-existing station 31 ieee80211 phy2: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-5) iwlagn 0000:20:00.0: Attempting to modify non-existing station 0 ieee80211 phy2: failed to remove key (0, 00:23:69:35:d1:3e) from hardware (-5) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:20:00.0: Error sending TX power (-5) iwlagn 0000:20:00.0: PCI INT A disabled iwlagn 0000:a0:00.0: PCI INT A disabled iwlagn 0000:80:00.0: PCI INT A disabled cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:80:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 iwlagn 0000:80:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 iwlagn 0000:80:00.0: device EEPROM VER=0x11f, CALIB=0x4 iwlagn 0000:80:00.0: Device SKU: 0Xb iwlagn 0000:80:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:80:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:80:00.0: irq 90 for MSI/MSI-X iwlagn 0000:a0:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 iwlagn 0000:a0:00.0: setting latency timer to 64 iwlagn 0000:a0:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:a0:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:a0:00.0: Device SKU: 0Xb iwlagn 0000:a0:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:a0:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:a0:00.0: irq 91 for MSI/MSI-X iwlagn 0000:20:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 iwlagn 0000:20:00.0: setting latency timer to 64 iwlagn 0000:20:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 iwlagn 0000:80:00.0: loaded firmware version 8.24.2.12 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:a0:00.0: loaded firmware version 9.176.4.1 build 15835 Registered led device: phy1-led ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:20:00.0: device EEPROM VER=0x36, CALIB=0x5 iwlagn 0000:20:00.0: Device SKU: 0Xb iwlagn 0000:20:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:20:00.0: irq 92 for MSI/MSI-X udev: renamed network interface wlan1 to wlan3 iwlagn 0000:20:00.0: loaded firmware version 228.61.2.24 Registered led device: phy2-led udev: renamed network interface wlan0 to wlan1 ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan2 ADDRCONF(NETDEV_UP): wlan3: link is not ready ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3e (try 1) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3e (try 1) wlan3: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=3) wlan3: associated ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan1: associate with 00:23:69:35:d1:3f (try 3) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready wlan2: no IPv6 routers present wlan3: no IPv6 routers present iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 wlan1: no IPv6 routers present wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:a0:00.0: Stopping AGG while state not ON or starting iwlagn 0000:a0:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:a0:00.0: Stopping AGG while state not ON or starting cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3f (try 1) wlan3: authenticate with 00:23:69:35:d1:3f (try 2) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3f (try 1) wlan3: associate with 00:23:69:35:d1:3f (try 2) wlan3: associate with 00:23:69:35:d1:3f (try 3) wlan3: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=2) wlan3: associated iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:a0:00.0: Queue 11 stuck for 2000 ms. iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:a0:00.0: Stopping AGG while state not ON or starting iwlagn 0000:a0:00.0: queue number out of range: 0, must be 10 to 19 wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3f (try 1) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3f (try 1) wlan3: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan3: associated iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:a0:00.0: Stopping AGG while state not ON or starting iwlagn 0000:a0:00.0: queue number out of range: 0, must be 10 to 19 wlan2: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3f (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3f (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=2) wlan2: associated wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:20:00.0: Received BA when not expected iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Failing on timeout while stopping DMA channel 1 [0x07fd0003] iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting iwlagn 0000:20:00.0: queue number out of range: 0, must be 7 to 14 iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting iwlagn 0000:20:00.0: queue number out of range: 0, must be 7 to 14 iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:20:00.0: Received BA when not expected iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting iwlagn 0000:20:00.0: queue number out of range: 0, must be 7 to 14 iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:20:00.0: Received BA when not expected wlan2: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan2: associated iwlagn 0000:20:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:20:00.0: Received BA when not expected wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan1: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3e (try 1) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3e (try 1) wlan1: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan1: associated iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting iwlagn 0000:80:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 wlan1: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticate with 00:23:69:35:d1:3f (try 3) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan1: associate with 00:23:69:35:d1:3f (try 3) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting iwlagn 0000:80:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated iwlagn 0000:20:00.0: Error sending TX power (-5) iwlagn 0000:20:00.0: PCI INT A disabled iwlagn 0000:a0:00.0: PCI INT A disabled wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:80:00.0: PCI INT A disabled cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:80:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 iwlagn 0000:80:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 iwlagn 0000:80:00.0: device EEPROM VER=0x11f, CALIB=0x4 iwlagn 0000:80:00.0: Device SKU: 0Xb iwlagn 0000:80:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:80:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:80:00.0: irq 90 for MSI/MSI-X iwlagn 0000:a0:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 iwlagn 0000:a0:00.0: setting latency timer to 64 iwlagn 0000:a0:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:80:00.0: loaded firmware version 8.24.2.12 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:a0:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:a0:00.0: Device SKU: 0Xb iwlagn 0000:a0:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:a0:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:a0:00.0: irq 91 for MSI/MSI-X iwlagn 0000:20:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 iwlagn 0000:20:00.0: setting latency timer to 64 iwlagn 0000:20:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:a0:00.0: loaded firmware version 9.176.4.1 build 15835 Registered led device: phy1-led iwlagn 0000:20:00.0: device EEPROM VER=0x36, CALIB=0x5 iwlagn 0000:20:00.0: Device SKU: 0Xb iwlagn 0000:20:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:20:00.0: irq 92 for MSI/MSI-X ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan1 iwlagn 0000:20:00.0: loaded firmware version 228.61.2.24 Registered led device: phy2-led ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan3 ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan3: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 2) iwlagn 0000:20:00.0: Error sending TX power (-5) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:20:00.0: Error sending TX power (-5) iwlagn 0000:20:00.0: PCI INT A disabled wlan1: associate with 00:23:69:35:d1:3f (try 3) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready iwlagn 0000:a0:00.0: PCI INT A disabled wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:80:00.0: PCI INT A disabled cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:80:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 iwlagn 0000:80:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 iwlagn 0000:80:00.0: device EEPROM VER=0x11f, CALIB=0x4 iwlagn 0000:80:00.0: Device SKU: 0Xb iwlagn 0000:80:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:80:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:80:00.0: irq 90 for MSI/MSI-X iwlagn 0000:a0:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 iwlagn 0000:a0:00.0: setting latency timer to 64 iwlagn 0000:a0:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:a0:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:a0:00.0: Device SKU: 0Xb iwlagn 0000:a0:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:a0:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:a0:00.0: irq 91 for MSI/MSI-X iwlagn 0000:20:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 iwlagn 0000:20:00.0: setting latency timer to 64 iwlagn 0000:20:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 iwlagn 0000:80:00.0: loaded firmware version 8.24.2.12 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:a0:00.0: loaded firmware version 9.176.4.1 build 15835 Registered led device: phy1-led ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:20:00.0: device EEPROM VER=0x36, CALIB=0x5 iwlagn 0000:20:00.0: Device SKU: 0Xb iwlagn 0000:20:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:20:00.0: irq 92 for MSI/MSI-X udev: renamed network interface wlan1 to wlan3 udev: renamed network interface wlan0 to wlan1 iwlagn 0000:20:00.0: loaded firmware version 228.61.2.24 Registered led device: phy2-led ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan2 ADDRCONF(NETDEV_UP): wlan3: link is not ready ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: waiting for beacon from 00:23:69:35:d1:3e wlan2: beacon received wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3f (try 2) wlan3: authenticated wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan3: associate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan3: associate with 00:23:69:35:d1:3f (try 2) wlan3: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan3: associated ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan1: associate with 00:23:69:35:d1:3f (try 3) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=2) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready wlan2: no IPv6 routers present wlan1: no IPv6 routers present wlan3: no IPv6 routers present wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3e (try 1) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3e (try 1) wlan3: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan3: associated iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:80:00.0: On demand firmware reload iwlagn 0000:a0:00.0: On demand firmware reload iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:a0:00.0: Stopping AGG while state not ON or starting iwlagn 0000:a0:00.0: queue number out of range: 0, must be 10 to 19 iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:20:00.0: Error sending TX power (-5) iwlagn 0000:20:00.0: PCI INT A disabled wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:259 debug_print_object+0x65/0x70() Hardware name: HP xw8600 Workstation ODEBUG: free active (active state 0) object type: timer_list name &ifmgd->conn_mon_timer Modules linked in: iwlagn(-) iwlcore mac80211 cfg80211 aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi arc4 microcode serio_raw ecb tg3 shpchp rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas ahci libahci pata_acpi ata_generic ata_piix floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: cfg80211] Pid: 11328, comm: rmmod Not tainted 2.6.38-rc4-wl+ #22 Call Trace: [<ffffffff810649cf>] ? warn_slowpath_common+0x7f/0xc0 [<ffffffff81064ac6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff81226fc5>] ? debug_print_object+0x65/0x70 [<ffffffff81227625>] ? debug_check_no_obj_freed+0x125/0x210 [<ffffffff8109ebd7>] ? debug_check_no_locks_freed+0xf7/0x170 [<ffffffff81156092>] ? kfree+0xc2/0x2f0 [<ffffffff813ec5c5>] ? netdev_release+0x45/0x60 [<ffffffff812f1067>] ? device_release+0x27/0xa0 [<ffffffff81216ddd>] ? kobject_release+0x8d/0x1a0 [<ffffffff81216d50>] ? kobject_release+0x0/0x1a0 [<ffffffff812183b7>] ? kref_put+0x37/0x70 [<ffffffff81216c57>] ? kobject_put+0x27/0x60 [<ffffffff813d5d1b>] ? netdev_run_todo+0x1ab/0x270 [<ffffffff813e771e>] ? rtnl_unlock+0xe/0x10 [<ffffffffa0529188>] ? ieee80211_unregister_hw+0x58/0x120 [mac80211] [<ffffffffa05e2ed7>] ? iwl_pci_remove+0xdb/0x22a [iwlagn] [<ffffffff8123cde2>] ? pci_device_remove+0x52/0x120 [<ffffffff812f5205>] ? __device_release_driver+0x75/0xe0 [<ffffffff812f5348>] ? driver_detach+0xd8/0xe0 [<ffffffff812f4111>] ? bus_remove_driver+0x91/0x100 [<ffffffff812f5b62>] ? driver_unregister+0x62/0xa0 [<ffffffff8123d194>] ? pci_unregister_driver+0x44/0xa0 [<ffffffffa05e2df5>] ? iwl_exit+0x15/0x1c [iwlagn] [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270 [<ffffffff81498889>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b ---[ end trace 4a63debfcb76796d ]--- iwlagn 0000:a0:00.0: PCI INT A disabled iwlagn 0000:80:00.0: PCI INT A disabled tar used greatest stack depth: 3312 bytes left cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:80:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 iwlagn 0000:80:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 iwlagn 0000:80:00.0: device EEPROM VER=0x11f, CALIB=0x4 iwlagn 0000:80:00.0: Device SKU: 0Xb iwlagn 0000:80:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:80:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:80:00.0: irq 90 for MSI/MSI-X iwlagn 0000:a0:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 iwlagn 0000:a0:00.0: setting latency timer to 64 iwlagn 0000:a0:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:a0:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:a0:00.0: Device SKU: 0Xb iwlagn 0000:a0:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:a0:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:a0:00.0: irq 91 for MSI/MSI-X iwlagn 0000:20:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 iwlagn 0000:20:00.0: setting latency timer to 64 iwlagn 0000:20:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 iwlagn 0000:80:00.0: loaded firmware version 8.24.2.12 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:a0:00.0: loaded firmware version 9.176.4.1 build 15835 Registered led device: phy1-led cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:20:00.0: device EEPROM VER=0x36, CALIB=0x5 iwlagn 0000:20:00.0: Device SKU: 0Xb iwlagn 0000:20:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:20:00.0: irq 92 for MSI/MSI-X ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan1 iwlagn 0000:20:00.0: loaded firmware version 228.61.2.24 Registered led device: phy2-led ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan3 udev: renamed network interface wlan0 to wlan2 ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan3: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready wlan2: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3f (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3f (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan3: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 3) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=2) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready wlan3: authenticate with 00:23:69:35:d1:3f (try 2) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3f (try 1) wlan3: associate with 00:23:69:35:d1:3f (try 2) wlan3: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=3) wlan3: associated ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready wlan2: no IPv6 routers present wlan1: no IPv6 routers present wlan3: no IPv6 routers present iwlagn 0000:80:00.0: Aggregation not enabled for tid 0 because load = 3 iwlagn 0000:80:00.0: Aggregation not enabled for tid 0 because load = 10 wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) iwlagn 0000:a0:00.0: Aggregation not enabled for tid 0 because load = 5 iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 wlan1: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3e (try 1) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3e (try 1) wlan1: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=1) wlan1: associated iwlagn 0000:80:00.0: Aggregation not enabled for tid 0 because load = 0 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:20:00.0: Error sending TX power (-5) iwlagn 0000:20:00.0: PCI INT A disabled wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) iwlagn 0000:a0:00.0: PCI INT A disabled wlan1: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:80:00.0: Stopping AGG while state not ON or starting cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:80:00.0: PCI INT A disabled Slab corruption: size-8192 start=ffff8800379f2000, len=8192 1cd0: d0 3c 9f 37 00 88 ff ff d0 3c 9f 37 00 88 ff ff cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:80:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 iwlagn 0000:80:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 iwlagn 0000:80:00.0: device EEPROM VER=0x11f, CALIB=0x4 iwlagn 0000:80:00.0: Device SKU: 0Xb iwlagn 0000:80:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:80:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:80:00.0: irq 90 for MSI/MSI-X iwlagn 0000:a0:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 iwlagn 0000:a0:00.0: setting latency timer to 64 iwlagn 0000:a0:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:a0:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:a0:00.0: Device SKU: 0Xb iwlagn 0000:a0:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:a0:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:a0:00.0: irq 91 for MSI/MSI-X iwlagn 0000:20:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 iwlagn 0000:20:00.0: setting latency timer to 64 iwlagn 0000:20:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 iwlagn 0000:80:00.0: loaded firmware version 8.24.2.12 Registered led device: phy0-led ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:a0:00.0: loaded firmware version 9.176.4.1 build 15835 Registered led device: phy1-led cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) iwlagn 0000:20:00.0: device EEPROM VER=0x36, CALIB=0x5 iwlagn 0000:20:00.0: Device SKU: 0Xb iwlagn 0000:20:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:20:00.0: irq 92 for MSI/MSI-X ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan1 iwlagn 0000:20:00.0: loaded firmware version 228.61.2.24 Registered led device: phy2-led ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan3 ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready ADDRCONF(NETDEV_UP): wlan3: link is not ready wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=1) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan1: associate with 00:23:69:35:d1:3f (try 3) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready wlan3: authenticate with 00:23:69:35:d1:3e (try 1) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3e (try 1) wlan3: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=2) wlan3: associated ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready wlan2: no IPv6 routers present wlan1: no IPv6 routers present wlan3: no IPv6 routers present iwlagn 0000:80:00.0: Aggregation not enabled for tid 0 because load = 1 iwlagn 0000:80:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3f tid = 0 wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:a0:00.0: iwlagn_tx_agg_start on ra = 00:23:69:35:d1:3e tid = 0 iwlagn 0000:20:00.0: Error sending TX power (-5) iwlagn 0000:20:00.0: PCI INT A disabled wlan3: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) iwlagn 0000:a0:00.0: Stopping AGG while state not ON or starting cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:259 debug_print_object+0x65/0x70() Hardware name: HP xw8600 Workstation ODEBUG: free active (active state 0) object type: timer_list name &ifmgd->conn_mon_timer Modules linked in: iwlagn(-) iwlcore mac80211 cfg80211 aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi arc4 microcode serio_raw ecb tg3 shpchp rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas ahci libahci pata_acpi ata_generic ata_piix floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: cfg80211] Pid: 13827, comm: rmmod Tainted: G W 2.6.38-rc4-wl+ #22 Call Trace: [<ffffffff810649cf>] ? warn_slowpath_common+0x7f/0xc0 [<ffffffff81064ac6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff81226fc5>] ? debug_print_object+0x65/0x70 [<ffffffff81227625>] ? debug_check_no_obj_freed+0x125/0x210 [<ffffffff8109ebd7>] ? debug_check_no_locks_freed+0xf7/0x170 [<ffffffff81156092>] ? kfree+0xc2/0x2f0 [<ffffffff813ec5c5>] ? netdev_release+0x45/0x60 [<ffffffff812f1067>] ? device_release+0x27/0xa0 [<ffffffff81216ddd>] ? kobject_release+0x8d/0x1a0 [<ffffffff81216d50>] ? kobject_release+0x0/0x1a0 [<ffffffff812183b7>] ? kref_put+0x37/0x70 [<ffffffff81216c57>] ? kobject_put+0x27/0x60 [<ffffffff813d5d1b>] ? netdev_run_todo+0x1ab/0x270 [<ffffffff813e771e>] ? rtnl_unlock+0xe/0x10 [<ffffffffa0581188>] ? ieee80211_unregister_hw+0x58/0x120 [mac80211] [<ffffffffa0377ed7>] ? iwl_pci_remove+0xdb/0x22a [iwlagn] [<ffffffff8123cde2>] ? pci_device_remove+0x52/0x120 [<ffffffff812f5205>] ? __device_release_driver+0x75/0xe0 [<ffffffff812f5348>] ? driver_detach+0xd8/0xe0 [<ffffffff812f4111>] ? bus_remove_driver+0x91/0x100 [<ffffffff812f5b62>] ? driver_unregister+0x62/0xa0 [<ffffffff8123d194>] ? pci_unregister_driver+0x44/0xa0 [<ffffffffa0377df5>] ? iwl_exit+0x15/0x1c [iwlagn] [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270 [<ffffffff81498889>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b ---[ end trace 4a63debfcb76796e ]--- iwlagn 0000:a0:00.0: PCI INT A disabled iwlagn 0000:80:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:80:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 iwlagn 0000:80:00.0: setting latency timer to 64 iwlagn 0000:80:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 iwlagn 0000:80:00.0: device EEPROM VER=0x11f, CALIB=0x4 iwlagn 0000:80:00.0: Device SKU: 0Xb iwlagn 0000:80:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:80:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:80:00.0: irq 90 for MSI/MSI-X iwlagn 0000:a0:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 iwlagn 0000:a0:00.0: setting latency timer to 64 iwlagn 0000:a0:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 iwlagn 0000:a0:00.0: device EEPROM VER=0x436, CALIB=0x6 iwlagn 0000:a0:00.0: Device SKU: 0Xb iwlagn 0000:a0:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 iwlagn 0000:a0:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:a0:00.0: irq 91 for MSI/MSI-X iwlagn 0000:20:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 iwlagn 0000:20:00.0: setting latency timer to 64 iwlagn 0000:20:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 iwlagn 0000:80:00.0: loaded firmware version 8.24.2.12 Registered led device: phy3-led ieee80211 phy3: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:a0:00.0: loaded firmware version 9.176.4.1 build 15835 Registered led device: phy4-led ieee80211 phy4: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:20:00.0: device EEPROM VER=0x36, CALIB=0x5 iwlagn 0000:20:00.0: Device SKU: 0Xb iwlagn 0000:20:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:20:00.0: irq 92 for MSI/MSI-X udev: renamed network interface wlan0 to wlan0-wlan1 udev: renamed network interface wlan1 to wlan3 iwlagn 0000:20:00.0: loaded firmware version 228.61.2.24 Registered led device: phy5-led udev: renamed network interface wlan0-wlan1 to wlan1 ieee80211 phy5: Selected rate control algorithm 'iwl-agn-rs' udev: renamed network interface wlan0 to wlan2 ADDRCONF(NETDEV_UP): wlan3: link is not ready ADDRCONF(NETDEV_UP): wlan1: link is not ready ADDRCONF(NETDEV_UP): wlan2: link is not ready wlan2: deauthenticating from 00:23:69:35:d1:3e by local choice (reason=3) wlan2: authenticate with 00:23:69:35:d1:3e (try 1) wlan2: authenticated wlan2: associate with 00:23:69:35:d1:3e (try 1) wlan2: RX AssocResp from 00:23:69:35:d1:3e (capab=0x411 status=0 aid=1) wlan2: associated ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready wlan3: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan3: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: deauthenticating from 00:23:69:35:d1:3f by local choice (reason=3) wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan3: authenticate with 00:23:69:35:d1:3f (try 2) wlan3: authenticated wlan3: associate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticated wlan1: associate with 00:23:69:35:d1:3f (try 1) wlan3: associate with 00:23:69:35:d1:3f (try 2) wlan3: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=1) wlan3: associated ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready wlan1: associate with 00:23:69:35:d1:3f (try 2) wlan1: associate with 00:23:69:35:d1:3f (try 3) wlan1: RX AssocResp from 00:23:69:35:d1:3f (capab=0x11 status=0 aid=2) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready wlan2: no IPv6 routers present wlan3: no IPv6 routers present wlan1: no IPv6 routers present -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
