From: George Kashperko <george@xxxxxxxxxxx> Reintroduce ssb device enable, disable, is_enabled, admatch base and size routines as device ops. This is required for transparent support for AI-style SB buses later on. As soon as exported routines were just replaced by device ops with appropriate inline accessor helpers these changes won't impact any ssb-related code. Signed-off-by: George Kashperko <george@xxxxxxxxxxx> --- drivers/ssb/main.c | 52 ++++++++++++++++++++------------------ include/linux/ssb/ssb.h | 43 ++++++++++++++++++++++--------- 2 files changed, 59 insertions(+), 36 deletions(-) --- linux-next-20110203.orig/drivers/ssb/main.c 2011-02-07 16:28:54.000000000 +0200 +++ linux-next-20110203/drivers/ssb/main.c 2011-02-07 16:04:14.000000000 +0200 @@ -49,6 +49,8 @@ static bool ssb_is_early_boot = 1; static void ssb_buses_lock(void); static void ssb_buses_unlock(void); +static const struct ssb_bus_ops ssb_ssb_ops; + #ifdef CONFIG_SSB_PCIHOST struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev) @@ -737,20 +739,6 @@ static void ssb_ssb_block_write(struct s } #endif /* CONFIG_SSB_BLOCKIO */ -/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */ -static const struct ssb_bus_ops ssb_ssb_ops = { - .read8 = ssb_ssb_read8, - .read16 = ssb_ssb_read16, - .read32 = ssb_ssb_read32, - .write8 = ssb_ssb_write8, - .write16 = ssb_ssb_write16, - .write32 = ssb_ssb_write32, -#ifdef CONFIG_SSB_BLOCKIO - .block_read = ssb_ssb_block_read, - .block_write = ssb_ssb_block_write, -#endif -}; - static int ssb_fetch_invariants(struct ssb_bus *bus, ssb_invariants_func_t get_invariants) { @@ -1136,7 +1124,7 @@ static u32 ssb_tmslow_reject_bitmask(str return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); } -int ssb_device_is_enabled(struct ssb_device *dev) +static int ssb_device_is_enabled_sb(struct ssb_device *dev) { u32 val; u32 reject; @@ -1147,7 +1135,6 @@ int ssb_device_is_enabled(struct ssb_dev return (val == SSB_TMSLOW_CLOCK); } -EXPORT_SYMBOL(ssb_device_is_enabled); static void ssb_flush_tmslow(struct ssb_device *dev) { @@ -1161,7 +1148,8 @@ static void ssb_flush_tmslow(struct ssb_ udelay(1); } -void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags) +static void ssb_device_enable_sb(struct ssb_device *dev, + u32 core_specific_flags) { u32 val; @@ -1190,7 +1178,6 @@ void ssb_device_enable(struct ssb_device core_specific_flags); ssb_flush_tmslow(dev); } -EXPORT_SYMBOL(ssb_device_enable); /* Wait for a bit in a register to get set or unset. * timeout is in units of ten-microseconds */ @@ -1218,7 +1205,8 @@ static int ssb_wait_bit(struct ssb_devic return -ETIMEDOUT; } -void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) +static void ssb_device_disable_sb(struct ssb_device *dev, + u32 core_specific_flags) { u32 reject; @@ -1240,7 +1228,6 @@ void ssb_device_disable(struct ssb_devic core_specific_flags); ssb_flush_tmslow(dev); } -EXPORT_SYMBOL(ssb_device_disable); u32 ssb_dma_translation(struct ssb_device *dev) { @@ -1312,7 +1299,7 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); -u32 ssb_admatch_base(struct ssb_device *dev, u32 adm) +static u32 ssb_admatch_base_sb(struct ssb_device *dev, u32 adm) { u32 base = 0; @@ -1336,9 +1323,8 @@ u32 ssb_admatch_base(struct ssb_device * return base; } -EXPORT_SYMBOL(ssb_admatch_base); -u32 ssb_admatch_size(struct ssb_device *dev, u32 adm) +static u32 ssb_admatch_size_sb(struct ssb_device *dev, u32 adm) { u32 size = 0; @@ -1363,7 +1349,25 @@ u32 ssb_admatch_size(struct ssb_device * return size; } -EXPORT_SYMBOL(ssb_admatch_size); + +/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */ +static const struct ssb_bus_ops ssb_ssb_ops = { + .read8 = ssb_ssb_read8, + .read16 = ssb_ssb_read16, + .read32 = ssb_ssb_read32, + .write8 = ssb_ssb_write8, + .write16 = ssb_ssb_write16, + .write32 = ssb_ssb_write32, +#ifdef CONFIG_SSB_BLOCKIO + .block_read = ssb_ssb_block_read, + .block_write = ssb_ssb_block_write, +#endif + .device_is_enabled = ssb_device_is_enabled_sb, + .device_enable = ssb_device_enable_sb, + .device_disable = ssb_device_disable_sb, + .admatch_base = ssb_admatch_base_sb, + .admatch_size = ssb_admatch_size_sb, +}; static int __init ssb_modinit(void) { --- linux-next-20110203.orig/include/linux/ssb/ssb.h 2011-02-07 16:28:54.000000000 +0200 +++ linux-next-20110203/include/linux/ssb/ssb.h 2011-02-07 16:29:56.000000000 +0200 @@ -119,6 +119,11 @@ struct ssb_bus_ops { void (*block_write)(struct ssb_device *dev, const void *buffer, size_t count, u16 offset, u8 reg_width); #endif + int (*device_is_enabled)(struct ssb_device *dev); + void (*device_enable)(struct ssb_device *dev, u32 core_specific_flags); + void (*device_disable)(struct ssb_device *dev, u32 core_specific_flags); + u32 (*admatch_base)(struct ssb_device *dev, u32 adm); + u32 (*admatch_size)(struct ssb_device *dev, u32 adm); }; @@ -415,14 +420,6 @@ extern int ssb_bus_resume(struct ssb_bus extern u32 ssb_clockspeed(struct ssb_bus *bus); -/* Is the device enabled in hardware? */ -int ssb_device_is_enabled(struct ssb_device *dev); -/* Enable a device and pass device-specific SSB_TMSLOW flags. - * If no device-specific flags are available, use 0. */ -void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags); -/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */ -void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags); - /* Device MMIO register read/write functions. */ static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) @@ -462,6 +459,32 @@ static inline void ssb_block_write(struc dev->ops->block_write(dev, buffer, count, offset, reg_width); } #endif /* CONFIG_SSB_BLOCKIO */ +/* Is the device enabled in hardware? */ +static inline int ssb_device_is_enabled(struct ssb_device *dev) +{ + return dev->ops->device_is_enabled(dev); +} +/* Enable a device and pass device-specific SSB_TMSLOW flags. + * If no device-specific flags are available, use 0. */ +static inline void ssb_device_enable(struct ssb_device *dev, + u32 core_specific_flags) +{ + return dev->ops->device_enable(dev, core_specific_flags); +} +/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */ +static inline void ssb_device_disable(struct ssb_device *dev, + u32 core_specific_flags) +{ + return dev->ops->device_disable(dev, core_specific_flags); +} +static inline u32 ssb_admatch_base(struct ssb_device *dev, u32 adm) +{ + return dev->ops->admatch_base(dev, adm); +} +static inline u32 ssb_admatch_size(struct ssb_device *dev, u32 adm) +{ + return dev->ops->admatch_size(dev, adm); +} /* The SSB DMA API. Use this API for any DMA operation on the device. @@ -519,10 +542,6 @@ extern int ssb_bus_may_powerdown(struct extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); -/* Various helper functions */ -extern u32 ssb_admatch_base(struct ssb_device *dev, u32 adm); -extern u32 ssb_admatch_size(struct ssb_device *dev, u32 adm); - /* PCI device mapping and fixup routines. * Called from the architecture pcibios init code. * These are only available on SSB_EMBEDDED configurations. */ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html