Hi all, I have an Atheros AR9382 chipset, on the 2x2 HB116. I was wondering if anyone knows how to enable PHY error codes on this card/chipset being passed up. Including synchronization errors, like in the PLCP. In: drivers/net/wireless/ath/ath9k/hw.c, and function: void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits) ... I did a REG_WRITE(ah, AR_PHY_ERR, 0xffffffff); to enable all phy error packets upwards in terms of the RX filter. I am also setting the following in ath9k_hw_ani_init (drivers/net/wireless/ath/ath9k/ani.c) REG_WRITE(ah, AR_PHY_ERR_1, ah->ani[0].ofdmPhyErrBase); REG_WRITE(ah, AR_PHY_ERR_2, ah->ani[0].cckPhyErrBase); I am also commented this out in drivers/net/wireless/ath/ath9k/recv.c: rfilt |= ATH9K_RX_FILTER_PHYERR; I've also tried forcing the card in to promiscuous mode. However, when I get errored packets up from the card, they all have the same error type which is 0x00, which makes me believe that the actual error bits are not being set, or something along these lines. Does anyone know what I might be missing? I'd greatly appreciate any help. - George -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
