In revision > 6.1.3.0.0 the firmware expects memory configuration command as part of boot. This was missing if driver boots in PLT mode. The patch adds the memory configuration command, which fixes PLT commands tx continuous and rx statistics. Signed-off-by: Gery Kahn <geryk@xxxxxx> --- This patch depends on Eliad's new firmware patchseries drivers/net/wireless/wl12xx/main.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index f5ad55a..4580728 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -482,6 +482,10 @@ static int wl1271_plt_init(struct wl1271 *wl) if (ret < 0) goto out_free_memmap; + ret = wl1271_acx_sta_mem_cfg(wl); + if (ret < 0) + goto out_free_memmap; + /* Default fragmentation threshold */ ret = wl1271_acx_frag_threshold(wl, wl->conf.tx.frag_threshold); if (ret < 0) -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
