Set the rate index rate_idx and preamble flag RX_FLAG_SHORTPRE on received
packets.
Signed-off-by: David Gnedt <david.gnedt@xxxxxxxxxxx>
---
drivers/net/wireless/wl1251/rx.c | 46 +++++++++++++++++++++++++++++++++++++-
1 files changed, 45 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/wl1251/rx.c b/drivers/net/wireless/wl1251/rx.c
index 99308af..c9396b5 100644
--- a/drivers/net/wireless/wl1251/rx.c
+++ b/drivers/net/wireless/wl1251/rx.c
@@ -96,8 +96,52 @@ static void wl1251_rx_status(struct wl1251 *wl,
if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
status->flag |= RX_FLAG_FAILED_FCS_CRC;
+ switch (desc->rate) {
+ /* skip 1 and 12 Mbps because they have same value 0x0a */
+ case RATE_2MBPS:
+ status->rate_idx = 1;
+ break;
+ case RATE_5_5MBPS:
+ status->rate_idx = 2;
+ break;
+ case RATE_11MBPS:
+ status->rate_idx = 3;
+ break;
+ case RATE_6MBPS:
+ status->rate_idx = 4;
+ break;
+ case RATE_9MBPS:
+ status->rate_idx = 5;
+ break;
+ case RATE_18MBPS:
+ status->rate_idx = 7;
+ break;
+ case RATE_24MBPS:
+ status->rate_idx = 8;
+ break;
+ case RATE_36MBPS:
+ status->rate_idx = 9;
+ break;
+ case RATE_48MBPS:
+ status->rate_idx = 10;
+ break;
+ case RATE_54MBPS:
+ status->rate_idx = 11;
+ break;
+ }
+
+ /* for 1 and 12 Mbps we have to check the modulation */
+ if (desc->rate == RATE_1MBPS) {
+ if (!(desc->mod_pre & OFDM_RATE_BIT))
+ /* CCK -> RATE_1MBPS */
+ status->rate_idx = 0;
+ else
+ /* OFDM -> RATE_12MBPS */
+ status->rate_idx = 6;
+ }
- /* FIXME: set status->rate_idx */
+ if (desc->mod_pre & SHORT_PREAMBLE_BIT)
+ status->flag |= RX_FLAG_SHORTPRE;
}
static void wl1251_rx_body(struct wl1251 *wl,
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
