On Sat, 2011-01-15 at 14:38 +0100, Felix Fietkau wrote: > When running as a 4-addr station against an AP that has the 4-addr VLAN > interface and the main 3-addr AP interface bridged together, sometimes > frames originating from the station were looping back from the 3-addr AP > interface, causing the bridge code to emit warnings about receiving frames > with its own source address. > I'm not sure why this is happening yet, but I think it's a good idea to > drop all frames (except 802.1x/EAP frames) that do not match the configured > addressing mode, including 4-address frames sent to a 3-address station. > User test reports indicate that the problem goes away with this patch. > > Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> > --- > net/mac80211/rx.c | 8 ++++++-- > 1 files changed, 6 insertions(+), 2 deletions(-) > > diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c > index a6701ed..54e3108 100644 > --- a/net/mac80211/rx.c > +++ b/net/mac80211/rx.c > @@ -1561,9 +1561,13 @@ __ieee80211_data_to_8023(struct ieee80211_rx_data *rx) > sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->u.vlan.sta) > return -1; > > + if (!ieee80211_802_1x_port_control(rx) && I think you need a different check there. This just checks the STA is authorized. johannes -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
