Gentlemen, When I run hostapd with 8+1 BSSID over one radio (ath9160), it runs well. All 9 BSS accepts clients. But when I "Ctrl + C" or "killall hostapd", hostapd daemon can NOT gracefully shut down. It hangs forever. I have to "Ctrl + C" again. Then it quits and print message like " I am running latest (as of 01/06/2011) hostapd, latest stable kernel (2.6.37) with one number change in ath9k to allow more than 12 virtual BSS over one radio. Below is my hostapd-conf and console screenshot. If someone can fix this bug, please help. Thanks ============================hostapd.conf begin ============================== interface=wlan0 #bridge=brg0 driver=nl80211 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=0 ##### IEEE 802.11 related configuration ####################################### ssid=bypass country_code=US ieee80211d=1 hw_mode=a channel=36 beacon_int=20 dtim_period=2 max_num_sta=255 rts_threshold=2347 fragm_threshold=2346 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 bss=vlan2 ssid=ath9160_2 bssid=02:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_2 wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 bss=vlan6 ssid=ath9160_6 bssid=06:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_6 wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 bss=vlana ssid=ath9160_a bssid=0a:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_a wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 bss=vlane ssid=ath9160_e bssid=0e:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_e wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 bss=vlan12 ssid=ath9160_12 bssid=12:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_12 wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 bss=vlan16 ssid=ath9160_16 bssid=16:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_16 wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 bss=vlan1a ssid=ath9160_1a bssid=1a:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_1a wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 bss=vlan1e ssid=ath9160_1e bssid=1e:06:6b:b1:b3:08 wpa=2 wpa_passphrase=helloworld_1e wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400 wpa_ptk_rekey=600 ============================hostapd.conf end ============================== ---------------console screenshot------------------------------------------------------------- root@mini-dell:~/hostapd-conf# hostapd 9VLANs Configuration file: 9VLANs Using interface wlan0 with hwaddr 00:0b:6b:b1:b3:08 and ssid 'bypass' Using interface vlan2 with hwaddr 02:06:6b:b1:b3:08 and ssid 'ath9160_2' Using interface vlan6 with hwaddr 06:06:6b:b1:b3:08 and ssid 'ath9160_6' Using interface vlana with hwaddr 0a:06:6b:b1:b3:08 and ssid 'ath9160_a' Using interface vlane with hwaddr 0e:06:6b:b1:b3:08 and ssid 'ath9160_e' Using interface vlan12 with hwaddr 12:06:6b:b1:b3:08 and ssid 'ath9160_12' Using interface vlan16 with hwaddr 16:06:6b:b1:b3:08 and ssid 'ath9160_16' Using interface vlan1a with hwaddr 1a:06:6b:b1:b3:08 and ssid 'ath9160_1a' Using interface vlan1e with hwaddr 1e:06:6b:b1:b3:08 and ssid 'ath9160_1e' AP-STA-DISCONNECTED 00:24:d7:1f:e4:fc vlan2: STA 00:24:d7:1f:e4:fc IEEE 802.11: did not acknowledge authentication response vlan2: STA 00:24:d7:1f:e4:fc IEEE 802.11: authenticated vlan2: STA 00:24:d7:1f:e4:fc IEEE 802.11: associated (aid 1) AP-STA-CONNECTED 00:24:d7:1f:e4:fc vlan2: STA 00:24:d7:1f:e4:fc RADIUS: starting accounting session 4D26599C-00000000 vlan2: STA 00:24:d7:1f:e4:fc WPA: pairwise key handshake completed (RSN) ^Cwlan0: STA 00:0b:6b:0a:4e:43 MLME: MLME-DEAUTHENTICATE.indication(00:0b:6b:0a:4e:43, 1) wlan0: STA 00:0b:6b:0a:4e:43 MLME: MLME-DELETEKEYS.request(00:0b:6b:0a:4e:43) ^Celoop: could not process SIGINT or SIGTERM in two seconds. Looks like there is a bug that ends up in a busy loop that prevents clean shutdown. Killing program forcefully. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
