From: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
Add two new per-BSS attributes to allow configuration of
HT capabilites and operational parameters by hostapd.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
---
include/linux/nl80211.h | 6 ++++++
include/net/cfg80211.h | 6 ++++++
include/net/mac80211.h | 4 ++++
net/mac80211/cfg.c | 15 +++++++++++++++
net/wireless/nl80211.c | 6 ++++++
5 files changed, 37 insertions(+), 0 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2b89b71..94c7dde 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -881,6 +881,9 @@ enum nl80211_commands {
* @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
* changed once the mesh is active.
*
+ * @NL80211_ATTR_BSS_HT_CAPAB: HT Capabilities for a BSS.
+ * @NL80211_ATTR_BSS_HT_PARAM: Current operational HT parameters.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1068,6 +1071,9 @@ enum nl80211_attrs {
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+ NL80211_ATTR_BSS_HT_CAPAB,
+ NL80211_ATTR_BSS_HT_PARAM,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bcc9f44..67a2351 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -607,6 +607,10 @@ struct mpath_info {
* @ap_isolate: do not forward packets between connected stations
* @ht_opmode: HT Operation mode
* (u16 = opmode, -1 = do not change)
+ * @ht_capab: HT capabilities
+ * (u16 = capabilties, -1 = do not change)
+ * @ht_param: HT Operating parameters
+ * (u8 = parameters, -1 = do not change)
*/
struct bss_parameters {
int use_cts_prot;
@@ -616,6 +620,8 @@ struct bss_parameters {
u8 basic_rates_len;
int ap_isolate;
int ht_opmode;
+ int ht_capab;
+ int ht_param;
};
/*
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5b3fd5a..a7efd18 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -227,6 +227,8 @@ enum ieee80211_bss_change {
* example.
* @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
* This field is only valid when the channel type is one of the HT types.
+ * @ht_capab: HT capabilities (as in &struct ieee80211_ht_cap).
+ * @ht_param: Operational HT parameters (as in &struct ieee80211_ht_info).
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
* implies disabled
* @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
@@ -261,6 +263,8 @@ struct ieee80211_bss_conf {
u32 basic_rates;
int mcast_rate[IEEE80211_NUM_BANDS];
u16 ht_operation_mode;
+ u16 ht_capab;
+ u8 ht_param;
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
enum nl80211_channel_type channel_type;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 4bc8a92..f10c92b 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1172,6 +1172,21 @@ static int ieee80211_change_bss(struct wiphy *wiphy,
changed |= BSS_CHANGED_HT;
}
+ if (params->ht_capab >= 0) {
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_supported_band *sband =
+ wiphy->bands[local->oper_channel->band];
+
+ sdata->vif.bss_conf.ht_capab =
+ (u16) (params->ht_capab & sband->ht_cap.cap);
+ changed |= BSS_CHANGED_HT;
+ }
+
+ if (params->ht_param >= 0) {
+ sdata->vif.bss_conf.ht_param = (u8) params->ht_param;
+ changed |= BSS_CHANGED_HT;
+ }
+
ieee80211_bss_info_change_notify(sdata, changed);
return 0;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9b62710..69b0051 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2597,6 +2597,12 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_BSS_HT_OPMODE])
params.ht_opmode =
nla_get_u16(info->attrs[NL80211_ATTR_BSS_HT_OPMODE]);
+ if (info->attrs[NL80211_ATTR_BSS_HT_CAPAB])
+ params.ht_capab =
+ nla_get_u16(info->attrs[NL80211_ATTR_BSS_HT_CAPAB]);
+ if (info->attrs[NL80211_ATTR_BSS_HT_PARAM])
+ params.ht_param =
+ nla_get_u8(info->attrs[NL80211_ATTR_BSS_HT_PARAM]);
if (!rdev->ops->change_bss)
return -EOPNOTSUPP;
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
