Dear All, Wireless adapter model: TP-LINK WN821NC (USB 300Mbps Wireless N adapter) Output of lsusb: Bus 001 Device 007: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG] Wireless router: TP-LINK W8960N (300Mbps Wireless N router) Driver name ar9170usb Linux distro: Ubuntu 10.10 64 bit Kernel version: 2.6.35-24-generic If I use Ndiswrapper + Windows XP driver, I can get full 300Mbps. At the same distance, if I use ar9170usb driver, I can only get maximum 54Mbps speed. Attached here with the screenshot of the speed, output of "dmesg" command, and the output of "iw event -t" command. Regards,
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-24-generic (buildd@yellow) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bee8b000 (usable) [ 0.000000] BIOS-e820: 00000000bee8b000 - 00000000bef9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bef9f000 - 00000000bfd75000 (usable) [ 0.000000] BIOS-e820: 00000000bfd75000 - 00000000bfd7d000 (reserved) [ 0.000000] BIOS-e820: 00000000bfd7d000 - 00000000bfe2d000 (usable) [ 0.000000] BIOS-e820: 00000000bfe2d000 - 00000000bfe31000 (reserved) [ 0.000000] BIOS-e820: 00000000bfe31000 - 00000000bfeaa000 (usable) [ 0.000000] BIOS-e820: 00000000bfeaa000 - 00000000bfee9000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee9000 - 00000000bfeee000 (usable) [ 0.000000] BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable) [ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000008f000 (usable) [ 0.000000] modified: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bee8b000 (usable) [ 0.000000] modified: 00000000bee8b000 - 00000000bef9f000 (ACPI NVS) [ 0.000000] modified: 00000000bef9f000 - 00000000bfd75000 (usable) [ 0.000000] modified: 00000000bfd75000 - 00000000bfd7d000 (reserved) [ 0.000000] modified: 00000000bfd7d000 - 00000000bfe2d000 (usable) [ 0.000000] modified: 00000000bfe2d000 - 00000000bfe31000 (reserved) [ 0.000000] modified: 00000000bfe31000 - 00000000bfeaa000 (usable) [ 0.000000] modified: 00000000bfeaa000 - 00000000bfee9000 (ACPI NVS) [ 0.000000] modified: 00000000bfee9000 - 00000000bfeee000 (usable) [ 0.000000] modified: 00000000bfeee000 - 00000000bfeff000 (ACPI data) [ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (usable) [ 0.000000] modified: 00000000bff00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff00000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff00000 page 4k [ 0.000000] kernel direct mapping tables up to bff00000 @ 16000-1b000 [ 0.000000] RAMDISK: 37571000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 00000000bfefd038 0004C (v01 INTEL D946GZIS 00000057 01000013) [ 0.000000] ACPI: FACP 00000000bfefc000 00074 (v01 INTEL D946GZIS 00000057 MSFT 01000013) [ 0.000000] ACPI: DSDT 00000000bfef7000 044D7 (v01 INTEL D946GZIS 00000057 MSFT 01000013) [ 0.000000] ACPI: FACS 00000000bfeaa000 00040 [ 0.000000] ACPI: APIC 00000000bfef6000 00078 (v01 INTEL D946GZIS 00000057 MSFT 01000013) [ 0.000000] ACPI: WDDT 00000000bfef5000 00040 (v01 INTEL D946GZIS 00000057 MSFT 01000013) [ 0.000000] ACPI: MCFG 00000000bfef4000 0003C (v01 INTEL D946GZIS 00000057 MSFT 01000013) [ 0.000000] ACPI: ASF! 00000000bfef3000 000A6 (v32 INTEL D946GZIS 00000057 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000bfef2000 001BC (v01 INTEL CpuPm 00000057 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000bfef1000 00175 (v01 INTEL Cpu0Ist 00000057 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000bfef0000 00175 (v01 INTEL Cpu1Ist 00000057 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000bfeef000 00175 (v01 INTEL Cpu2Ist 00000057 MSFT 01000013) [ 0.000000] ACPI: SSDT 00000000bfeee000 00175 (v01 INTEL Cpu3Ist 00000057 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bff00000 [ 0.000000] Initmem setup node 0 0000000000000000-00000000bff00000 [ 0.000000] NODE_DATA [0000000001d18100 - 0000000001d1d0ff] [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002600000-ffff880004ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000008f [ 0.000000] 0: 0x00000100 -> 0x000bee8b [ 0.000000] 0: 0x000bef9f -> 0x000bfd75 [ 0.000000] 0: 0x000bfd7d -> 0x000bfe2d [ 0.000000] 0: 0x000bfe31 -> 0x000bfeaa [ 0.000000] 0: 0x000bfee9 -> 0x000bfeee [ 0.000000] 0: 0x000bfeff -> 0x000bff00 [ 0.000000] On node 0 totalpages: 785679 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10693 pages used for memmap [ 0.000000] DMA32 zone: 771019 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [19000 - 197ff] [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bee8b000 - 00000000bef9f000 [ 0.000000] PM: Registered nosave memory: 00000000bfd75000 - 00000000bfd7d000 [ 0.000000] PM: Registered nosave memory: 00000000bfe2d000 - 00000000bfe31000 [ 0.000000] PM: Registered nosave memory: 00000000bfeaa000 - 00000000bfee9000 [ 0.000000] PM: Registered nosave memory: 00000000bfeee000 - 00000000bfeff000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ff80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u524288 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff] [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 774930 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Subtract (58 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [0037571000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d180dd] BRK [ 0.000000] #4 [000009fc00 - 00000fe200] BIOS reserved [ 0.000000] #5 [00000fe200 - 00000fe210] MP-table mpf [ 0.000000] #6 [00000fe250 - 0000100000] BIOS reserved [ 0.000000] #7 [00000fe210 - 00000fe250] MP-table mpc [ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #10 [0000016000 - 0000019000] PGTABLE [ 0.000000] #11 [0001d18100 - 0001d1d100] NODE_DATA [ 0.000000] #12 [0001d1d100 - 0001d1e100] BOOTMEM [ 0.000000] #13 [0001d17140 - 0001d17380] BOOTMEM [ 0.000000] #14 [000251f000 - 0002520000] BOOTMEM [ 0.000000] #15 [0002520000 - 0002521000] BOOTMEM [ 0.000000] #16 [0002600000 - 0005000000] MEMMAP 0 [ 0.000000] #17 [0001d17380 - 0001d17500] BOOTMEM [ 0.000000] #18 [0001d1e100 - 0001d36100] BOOTMEM [ 0.000000] #19 [0001d37000 - 0001d38000] BOOTMEM [ 0.000000] #20 [0001d17500 - 0001d17543] BOOTMEM [ 0.000000] #21 [0001d17580 - 0001d17938] BOOTMEM [ 0.000000] #22 [0001d17940 - 0001d179a8] BOOTMEM [ 0.000000] #23 [0001d179c0 - 0001d17a28] BOOTMEM [ 0.000000] #24 [0001d17a40 - 0001d17aa8] BOOTMEM [ 0.000000] #25 [0001d17ac0 - 0001d17b28] BOOTMEM [ 0.000000] #26 [0001d17b40 - 0001d17ba8] BOOTMEM [ 0.000000] #27 [0001d17bc0 - 0001d17c28] BOOTMEM [ 0.000000] #28 [0001d17c40 - 0001d17ca8] BOOTMEM [ 0.000000] #29 [0001d17cc0 - 0001d17d28] BOOTMEM [ 0.000000] #30 [0001d17d40 - 0001d17da8] BOOTMEM [ 0.000000] #31 [0001d17dc0 - 0001d17e28] BOOTMEM [ 0.000000] #32 [0001d17e40 - 0001d17ea8] BOOTMEM [ 0.000000] #33 [0001d17ec0 - 0001d17f28] BOOTMEM [ 0.000000] #34 [0001d17f40 - 0001d17fa8] BOOTMEM [ 0.000000] #35 [0001d36100 - 0001d36168] BOOTMEM [ 0.000000] #36 [0001d36180 - 0001d361e8] BOOTMEM [ 0.000000] #37 [0001d36200 - 0001d36268] BOOTMEM [ 0.000000] #38 [0001d17fc0 - 0001d17fe0] BOOTMEM [ 0.000000] #39 [0001d36280 - 0001d362a0] BOOTMEM [ 0.000000] #40 [0001d362c0 - 0001d362e0] BOOTMEM [ 0.000000] #41 [0001d36300 - 0001d36320] BOOTMEM [ 0.000000] #42 [0001d36340 - 0001d36360] BOOTMEM [ 0.000000] #43 [0001d36380 - 0001d363a0] BOOTMEM [ 0.000000] #44 [0001d363c0 - 0001d36427] BOOTMEM [ 0.000000] #45 [0001d36440 - 0001d364a7] BOOTMEM [ 0.000000] #46 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #47 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #48 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #49 [0001f80000 - 0001f9e000] BOOTMEM [ 0.000000] #50 [0001d364c0 - 0001d364c8] BOOTMEM [ 0.000000] #51 [0001d36500 - 0001d36508] BOOTMEM [ 0.000000] #52 [0001d36540 - 0001d36550] BOOTMEM [ 0.000000] #53 [0001d36580 - 0001d365a0] BOOTMEM [ 0.000000] #54 [0001d365c0 - 0001d366f0] BOOTMEM [ 0.000000] #55 [0001d36700 - 0001d36750] BOOTMEM [ 0.000000] #56 [0001d36780 - 0001d367d0] BOOTMEM [ 0.000000] #57 [0001d38000 - 0001d40000] BOOTMEM [ 0.000000] Memory: 3074868k/3144704k available (5711k kernel code, 1988k absent, 67848k reserved, 5379k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 31457280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 2131.198 MHz processor. [ 0.030012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4262.39 BogoMIPS (lpj=21311980) [ 0.030017] pid_max: default: 32768 minimum: 301 [ 0.030048] Security Framework initialized [ 0.030070] AppArmor: AppArmor initialized [ 0.030072] Yama: becoming mindful. [ 0.030602] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.034063] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.035739] Mount-cache hash table entries: 256 [ 0.035934] Initializing cgroup subsys ns [ 0.035940] Initializing cgroup subsys cpuacct [ 0.035944] Initializing cgroup subsys memory [ 0.035955] Initializing cgroup subsys devices [ 0.035958] Initializing cgroup subsys freezer [ 0.035960] Initializing cgroup subsys net_cls [ 0.035995] CPU: Physical Processor ID: 0 [ 0.035997] CPU: Processor Core ID: 0 [ 0.035999] mce: CPU supports 6 MCE banks [ 0.036009] CPU0: Thermal monitoring enabled (TM2) [ 0.036014] using mwait in idle threads. [ 0.036017] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.036023] PEBS disabled due to CPU errata. [ 0.036028] ... version: 2 [ 0.036029] ... bit width: 40 [ 0.036031] ... generic registers: 2 [ 0.036033] ... value mask: 000000ffffffffff [ 0.036035] ... max period: 000000007fffffff [ 0.036037] ... fixed-purpose events: 3 [ 0.036038] ... event mask: 0000000700000003 [ 0.040782] ACPI: Core revision 20100428 [ 0.047808] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.047814] ftrace: allocating 22678 entries in 89 pages [ 0.050063] Setting APIC routing to flat [ 0.050374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.158401] CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 [ 0.160000] Booting Node 0, Processors #1 [ 0.320018] Brought up 2 CPUs [ 0.320022] Total of 2 processors activated (8524.94 BogoMIPS). [ 0.320520] devtmpfs: initialized [ 0.320716] regulator: core version 0.5 [ 0.320741] Time: 14:06:41 Date: 12/30/10 [ 0.320783] NET: Registered protocol family 16 [ 0.320807] Trying to unpack rootfs image as initramfs... [ 0.320922] ACPI: bus type pci registered [ 0.321002] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.321005] PCI: not using MMCONFIG [ 0.321006] PCI: Using configuration type 1 for base access [ 0.330166] bio: create slab <bio-0> at 0 [ 0.331136] ACPI: EC: Look up EC in DSDT [ 0.333877] ACPI: Interpreter enabled [ 0.333880] ACPI: (supports S0 S3 S4 S5) [ 0.333898] ACPI: Using IOAPIC for interrupt routing [ 0.333939] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.334091] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources [ 0.367964] ACPI: No dock devices found. [ 0.367969] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.368957] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.370874] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.370877] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.370880] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.370883] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored) [ 0.370885] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] (ignored) [ 0.370888] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xefffffff] (ignored) [ 0.370968] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.370972] pci 0000:00:01.0: PME# disabled [ 0.371026] pci 0000:00:1b.0: reg 10: [mem 0xd0200000-0xd0203fff 64bit] [ 0.371067] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.371070] pci 0000:00:1b.0: PME# disabled [ 0.371140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.371144] pci 0000:00:1c.0: PME# disabled [ 0.371213] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.371216] pci 0000:00:1c.2: PME# disabled [ 0.371281] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.371285] pci 0000:00:1c.3: PME# disabled [ 0.371335] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] [ 0.371382] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] [ 0.371429] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] [ 0.371474] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f] [ 0.371519] pci 0000:00:1d.7: reg 10: [mem 0xd0204400-0xd02047ff] [ 0.371569] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.371574] pci 0000:00:1d.7: PME# disabled [ 0.371695] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.371705] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.371709] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.371713] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.371755] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.371761] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.371767] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.371773] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.371779] pci 0000:00:1f.1: reg 20: [io 0x30b0-0x30bf] [ 0.371819] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf] [ 0.371826] pci 0000:00:1f.2: reg 14: [io 0x30e4-0x30e7] [ 0.371832] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7] [ 0.371838] pci 0000:00:1f.2: reg 1c: [io 0x30e0-0x30e3] [ 0.371844] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af] [ 0.371849] pci 0000:00:1f.2: reg 24: [mem 0xd0204000-0xd02043ff] [ 0.371869] pci 0000:00:1f.2: PME# supported from D3hot [ 0.371872] pci 0000:00:1f.2: PME# disabled [ 0.371915] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 0.371984] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.371993] pci 0000:01:00.0: reg 18: [mem 0xd0100000-0xd010ffff 64bit] [ 0.371999] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff] [ 0.372007] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.372025] pci 0000:01:00.0: supports D1 D2 [ 0.372051] pci 0000:01:00.1: reg 10: [mem 0xd0110000-0xd011ffff 64bit] [ 0.372083] pci 0000:01:00.1: supports D1 D2 [ 0.372096] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.372106] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.372110] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.372113] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.372118] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.372157] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.372161] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.372166] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff] [ 0.372172] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.372215] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.372219] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled) [ 0.372223] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff] [ 0.372229] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.372268] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.372272] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) [ 0.372276] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 0.372282] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.372329] pci 0000:05:01.0: reg 10: [io 0x1000-0x10ff] [ 0.372336] pci 0000:05:01.0: reg 14: [mem 0xd0000000-0xd00000ff] [ 0.372378] pci 0000:05:01.0: supports D1 D2 [ 0.372381] pci 0000:05:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.372385] pci 0000:05:01.0: PME# disabled [ 0.372432] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.372436] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.372440] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff] [ 0.372446] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.372448] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.372451] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode) [ 0.372473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.372653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.372844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.372908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.372968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.377067] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.377171] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.377278] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.377379] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.377478] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.377578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.377679] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) [ 0.377777] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) [ 0.377824] HEST: Table is not found! [ 0.377923] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.377926] vgaarb: loaded [ 0.378089] SCSI subsystem initialized [ 0.378194] libata version 3.00 loaded. [ 0.378245] usbcore: registered new interface driver usbfs [ 0.378258] usbcore: registered new interface driver hub [ 0.378319] usbcore: registered new device driver usb [ 0.378425] ACPI: WMI: Mapper loaded [ 0.378427] PCI: Using ACPI for IRQ routing [ 0.378430] PCI: pci_cache_line_size set to 64 bytes [ 0.378515] reserve RAM buffer: 000000000008f000 - 000000000008ffff [ 0.378518] reserve RAM buffer: 00000000bee8b000 - 00000000bfffffff [ 0.378521] reserve RAM buffer: 00000000bfd75000 - 00000000bfffffff [ 0.378525] reserve RAM buffer: 00000000bfe2d000 - 00000000bfffffff [ 0.378528] reserve RAM buffer: 00000000bfeaa000 - 00000000bfffffff [ 0.378530] reserve RAM buffer: 00000000bfeee000 - 00000000bfffffff [ 0.378533] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff [ 0.378640] NetLabel: Initializing [ 0.378642] NetLabel: domain hash size = 128 [ 0.378643] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.378659] NetLabel: unlabeled traffic allowed by default [ 0.378803] hpet clockevent registered [ 0.378806] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.378810] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.378815] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.400042] Switching to clocksource tsc [ 0.413909] AppArmor: AppArmor Filesystem Enabled [ 0.413930] pnp: PnP ACPI init [ 0.413957] ACPI: bus type pnp registered [ 0.416773] pnp: PnP ACPI: found 12 devices [ 0.416775] ACPI: ACPI bus type pnp unregistered [ 0.416789] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.416792] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.416795] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved [ 0.416798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.416801] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.416803] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.416806] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.416809] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.416812] system 00:01: [mem 0x000c0000-0x000dffff] has been reserved [ 0.416818] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.416826] system 00:06: [io 0x0500-0x053f] has been reserved [ 0.416828] system 00:06: [io 0x0400-0x047f] has been reserved [ 0.416831] system 00:06: [io 0x0680-0x06ff] has been reserved [ 0.422902] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.422953] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.422957] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.422960] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd0a00000-0xd0bfffff 64bit pref] [ 0.422964] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.422966] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff] [ 0.422969] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff] [ 0.422973] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref] [ 0.422977] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.422980] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.422984] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.422987] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.422992] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.422995] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.423000] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff] [ 0.423004] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.423010] pci 0000:00:1c.2: PCI bridge to [bus 03-03] [ 0.423013] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.423018] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff] [ 0.423022] pci 0000:00:1c.2: bridge window [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.423028] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.423031] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.423037] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 0.423042] pci 0000:00:1c.3: bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref] [ 0.423049] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.423052] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.423058] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff] [ 0.423062] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.423078] alloc irq_desc for 16 on node -1 [ 0.423080] alloc kstat_irqs on node -1 [ 0.423088] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.423092] pci 0000:00:01.0: setting latency timer to 64 [ 0.423101] alloc irq_desc for 17 on node -1 [ 0.423103] alloc kstat_irqs on node -1 [ 0.423106] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.423110] pci 0000:00:1c.0: setting latency timer to 64 [ 0.423118] alloc irq_desc for 18 on node -1 [ 0.423120] alloc kstat_irqs on node -1 [ 0.423123] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.423127] pci 0000:00:1c.2: setting latency timer to 64 [ 0.423135] alloc irq_desc for 19 on node -1 [ 0.423137] alloc kstat_irqs on node -1 [ 0.423140] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.423144] pci 0000:00:1c.3: setting latency timer to 64 [ 0.423150] pci 0000:00:1e.0: setting latency timer to 64 [ 0.423155] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.423157] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.423160] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.423163] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff] [ 0.423165] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.423168] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.423170] pci_bus 0000:02: resource 1 [mem 0xd0300000-0xd03fffff] [ 0.423172] pci_bus 0000:02: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.423175] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.423177] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff] [ 0.423179] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.423182] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.423184] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff] [ 0.423186] pci_bus 0000:04: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit pref] [ 0.423189] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.423191] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd00fffff] [ 0.423194] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.423196] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffffffffffff] [ 0.423241] NET: Registered protocol family 2 [ 0.423420] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.424956] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.432268] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.433180] TCP: Hash tables configured (established 524288 bind 65536) [ 0.433183] TCP reno registered [ 0.433197] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.433277] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.433474] NET: Registered protocol family 1 [ 0.433719] pci 0000:01:00.0: Boot video device [ 0.433729] PCI: CLS 64 bytes, default 64 [ 0.434004] Scanning for low memory corruption every 60 seconds [ 0.434224] audit: initializing netlink socket (disabled) [ 0.434236] type=2000 audit(1293718001.420:1): initialized [ 0.448762] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.450257] VFS: Disk quotas dquot_6.5.2 [ 0.450321] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.450916] fuse init (API version 7.14) [ 0.451007] msgmni has been set to 6005 [ 0.451300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.451303] io scheduler noop registered [ 0.451305] io scheduler deadline registered [ 0.451341] io scheduler cfq registered (default) [ 0.451457] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.451482] alloc irq_desc for 40 on node -1 [ 0.451485] alloc kstat_irqs on node -1 [ 0.451494] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.451550] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.451585] alloc irq_desc for 41 on node -1 [ 0.451587] alloc kstat_irqs on node -1 [ 0.451593] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.451670] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.451699] alloc irq_desc for 42 on node -1 [ 0.451701] alloc kstat_irqs on node -1 [ 0.451708] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.451788] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.451817] alloc irq_desc for 43 on node -1 [ 0.451819] alloc kstat_irqs on node -1 [ 0.451826] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.451929] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.452007] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.452093] intel_idle: MWAIT substates: 0x20 [ 0.452095] intel_idle: does not run on family 6 model 15 [ 0.452192] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.452204] ACPI: Sleep Button [SLPB] [ 0.452257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.452260] ACPI: Power Button [PWRF] [ 0.452416] ACPI: acpi_idle registered with cpuidle [ 0.454028] ERST: Table is not found! [ 0.454169] Linux agpgart interface v0.103 [ 0.454190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.454288] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.454655] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.455765] brd: module loaded [ 0.456276] loop: module loaded [ 0.456474] ata_piix 0000:00:1f.1: version 2.13 [ 0.456488] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.456528] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.456635] scsi0 : ata_piix [ 0.456710] scsi1 : ata_piix [ 0.457158] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14 [ 0.457161] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15 [ 0.457181] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.457186] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.457221] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.457271] scsi2 : ata_piix [ 0.457328] scsi3 : ata_piix [ 0.457462] ata3: SATA max UDMA/133 cmd 0x30c8 ctl 0x30e4 bmdma 0x30a0 irq 19 [ 0.457465] ata4: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e0 bmdma 0x30a8 irq 19 [ 0.457763] Fixed MDIO Bus: probed [ 0.457793] PPP generic driver version 2.4.2 [ 0.457833] tun: Universal TUN/TAP device driver, 1.6 [ 0.457835] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.457929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.457948] alloc irq_desc for 23 on node -1 [ 0.457950] alloc kstat_irqs on node -1 [ 0.457957] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.457977] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.457981] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.458017] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.458041] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.458051] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.461938] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.461957] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0204400 [ 0.466073] ata2: port disabled. ignoring. [ 0.479833] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.480009] hub 1-0:1.0: USB hub found [ 0.480015] hub 1-0:1.0: 8 ports detected [ 0.480106] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.480125] uhci_hcd: USB Universal Host Controller Interface driver [ 0.480214] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.480224] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.480228] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.480283] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.480310] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 [ 0.480426] hub 2-0:1.0: USB hub found [ 0.480430] hub 2-0:1.0: 2 ports detected [ 0.480489] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.480495] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.480498] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.480530] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.480552] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 [ 0.480673] hub 3-0:1.0: USB hub found [ 0.480677] hub 3-0:1.0: 2 ports detected [ 0.480735] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.480742] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.480745] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.480778] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.480812] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 0.480924] hub 4-0:1.0: USB hub found [ 0.480928] hub 4-0:1.0: 2 ports detected [ 0.480981] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.480987] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.480990] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.481030] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.481060] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020 [ 0.481174] hub 5-0:1.0: USB hub found [ 0.481178] hub 5-0:1.0: 2 ports detected [ 0.481293] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.484343] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.484350] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.484476] mice: PS/2 mouse device common for all mice [ 0.484596] rtc_cmos 00:03: RTC can wake from S4 [ 0.484640] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.484664] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.484772] device-mapper: uevent: version 1.0.3 [ 0.484871] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx [ 0.484936] device-mapper: multipath: version 1.1.1 loaded [ 0.484938] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.485094] cpuidle: using governor ladder [ 0.485097] cpuidle: using governor menu [ 0.485378] TCP cubic registered [ 0.485503] NET: Registered protocol family 10 [ 0.485871] lo: Disabled Privacy Extensions [ 0.486064] NET: Registered protocol family 17 [ 0.486526] PM: Resume from disk failed. [ 0.486540] registered taskstats version 1 [ 0.486779] Magic number: 6:840:132 [ 0.486857] acpi device:07: hash matches [ 0.486896] rtc_cmos 00:03: setting system clock to 2010-12-30 14:06:42 UTC (1293718002) [ 0.486899] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.486901] EDD information not available. [ 0.513615] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.577713] Freeing initrd memory: 10748k freed [ 0.659975] ata4.01: ATAPI: PIONEER DVD-RW DVR-216, 1.07, max UDMA/66 [ 0.665366] ata3.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 [ 0.665371] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.700084] ata4.01: configured for UDMA/66 [ 0.700475] ata3.00: configured for UDMA/133 [ 0.700675] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 0.700838] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.700889] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 0.700897] sd 2:0:0:0: [sda] Write Protect is off [ 0.700901] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.700926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.701187] sda: [ 0.702307] scsi 3:0:1:0: CD-ROM PIONEER DVD-RW DVR-216 1.07 PQ: 0 ANSI: 5 [ 0.703230] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.703234] Uniform CD-ROM driver Revision: 3.20 [ 0.703341] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 0.703400] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 0.704215] sda1 sda2 < sda5 > [ 0.715776] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.715800] Freeing unused kernel memory: 908k freed [ 0.716170] Write protecting the kernel read-only data: 10240k [ 0.716349] Freeing unused kernel memory: 412k freed [ 0.716627] Freeing unused kernel memory: 1644k freed [ 0.732532] udev[82]: starting version 163 [ 0.800322] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.834984] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.835030] alloc irq_desc for 22 on node -1 [ 0.835032] alloc kstat_irqs on node -1 [ 0.835042] 8139too 0000:05:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.835994] 8139too 0000:05:01.0: eth0: RealTek RTL8139 at 0x1000, 00:1e:58:31:b4:7a, IRQ 22 [ 1.142309] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 1.254382] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 1.294541] hub 1-4:1.0: USB hub found [ 1.294882] hub 1-4:1.0: 4 ports detected [ 1.411461] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.644152] usb 1-4.1: new high speed USB device using ehci_hcd and address 5 [ 1.751947] hub 1-4.1:1.0: USB hub found [ 1.752261] hub 1-4.1:1.0: 4 ports detected [ 1.830402] usb 1-4.2: new full speed USB device using ehci_hcd and address 6 [ 12.276075] udev[344]: starting version 163 [ 12.358189] lp: driver loaded but no devices found [ 12.426723] intel_rng: Firmware space is locked read-only. If you can't or [ 12.426724] intel_rng: don't want to disable this in firmware setup, and if [ 12.426726] intel_rng: you are certain that your system has a functional [ 12.426727] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 12.520210] leds_ss4200: no LED devices found [ 12.549663] parport_pc 00:07: reported by Plug and Play ACPI [ 12.549744] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 12.578369] Disabling lock debugging due to kernel taint [ 12.593718] Initializing USB Mass Storage driver... [ 12.604891] type=1400 audit(1293689214.607:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=603 comm="apparmor_parser" [ 12.605561] type=1400 audit(1293689214.607:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=603 comm="apparmor_parser" [ 12.605920] type=1400 audit(1293689214.607:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=603 comm="apparmor_parser" [ 12.611440] [drm] Initialized drm 1.1.0 20060810 [ 12.624122] ppdev: user-space parallel port driver [ 12.625886] type=1400 audit(1293689214.627:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=634 comm="apparmor_parser" [ 12.627148] scsi4 : usb-storage 1-6:1.0 [ 12.631518] lp0: using parport0 (interrupt-driven). [ 12.639002] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 12.648127] usbcore: registered new interface driver usb-storage [ 12.648131] USB Mass Storage support registered. [ 12.660773] usbcore: registered new interface driver hiddev [ 12.662909] input: USB AUDIO as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.2/1-4.2:1.2/input/input3 [ 12.663045] generic-usb 0003:1130:1620.0001: input,hidraw0: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1d.7-4.2/input2 [ 12.663069] usbcore: registered new interface driver usbhid [ 12.663071] usbhid: USB HID core driver [ 12.719395] [drm] radeon defaulting to kernel modesetting. [ 12.719400] [drm] radeon kernel modesetting enabled. [ 12.719467] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.719472] radeon 0000:01:00.0: setting latency timer to 64 [ 12.722718] [drm] initializing kernel modesetting (RV530 0x1002:0x71C1). [ 12.725406] [drm] register mmio base: 0xD0100000 [ 12.725409] [drm] register mmio size: 65536 [ 12.726413] ATOM BIOS: RX165PG3 [ 12.726439] [drm] Generation 2 PCI interface, using max accessible memory [ 12.726444] radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used) [ 12.726448] radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF [ 12.726537] alloc irq_desc for 44 on node -1 [ 12.726540] alloc kstat_irqs on node -1 [ 12.726554] radeon 0000:01:00.0: irq 44 for MSI/MSI-X [ 12.726559] radeon 0000:01:00.0: radeon: using MSI. [ 12.726584] [drm] radeon: irq initialized. [ 12.727104] [drm] Detected VRAM RAM=256M, BAR=256M [ 12.727108] [drm] RAM width 128bits DDR [ 12.731482] [TTM] Zone kernel: Available graphics memory: 1544290 kiB. [ 12.731485] [TTM] Initializing pool allocator. [ 12.731507] [drm] radeon: 256M of VRAM memory ready [ 12.731509] [drm] radeon: 512M of GTT memory ready. [ 12.731531] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 12.733447] [drm] radeon: 1 quad pipes, 2 z pipes initialized. [ 12.734356] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 12.734981] [drm] Loading R500 Microcode [ 12.748746] [drm] radeon: ring at 0x0000000010000000 [ 12.748778] [drm] ring test succeeded in 7 usecs [ 12.748902] [drm] radeon: ib pool ready. [ 12.749123] [drm] ib test succeeded in 0 usecs [ 12.749133] failed to evaluate ATIF got AE_BAD_PARAMETER [ 12.749136] radeon 0000:01:00.0: Error during ACPI methods call [ 12.749197] [drm] Default TV standard: NTSC [ 12.749199] [drm] Default TV standard: NTSC [ 12.749284] [drm] Default TV standard: NTSC [ 12.749360] [drm] Radeon Display Connectors [ 12.749362] [drm] Connector 0: [ 12.749363] [drm] DVI-I [ 12.749365] [drm] HPD1 [ 12.749367] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 12.749369] [drm] Encoders: [ 12.749371] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 12.749372] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 12.749374] [drm] Connector 1: [ 12.749375] [drm] S-video [ 12.749377] [drm] Encoders: [ 12.749378] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 12.749380] [drm] Connector 2: [ 12.749381] [drm] DVI-I [ 12.749383] [drm] HPD2 [ 12.749385] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 12.749387] [drm] Encoders: [ 12.749388] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 12.749390] [drm] DFP3: INTERNAL_LVTM1 [ 12.781572] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 12.784185] usbcore: registered new interface driver snd-usb-audio [ 12.956666] [drm] fb mappable at 0xC00C0000 [ 12.956669] [drm] vram apper at 0xC0000000 [ 12.956671] [drm] size 5300224 [ 12.956673] [drm] fb depth is 24 [ 12.956675] [drm] pitch is 5888 [ 12.974933] Console: switching to colour frame buffer device 180x56 [ 12.978329] fb0: radeondrmfb frame buffer device [ 12.978330] drm: registered panic notifier [ 12.978334] Slow work thread pool: Starting up [ 12.978401] Slow work thread pool: Ready [ 12.978408] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0 [ 12.990396] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.990444] alloc irq_desc for 45 on node -1 [ 12.990447] alloc kstat_irqs on node -1 [ 12.990459] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 12.990484] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.110021] usb 1-1: reset high speed USB device using ehci_hcd and address 2 [ 13.262764] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 13.363096] ndiswrapper (link_pe_images:565): fixing KI_USER_SHARED_DATA address in the driver [ 13.364770] ndiswrapper: driver arusb_xp (,02/25/2010,3.0.0.165) loaded [ 13.581435] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 13.581541] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 13.581604] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 13.581686] input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 13.581750] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 13.608127] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 13.642944] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 13.651824] scsi 4:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI: 2 CCS [ 13.653341] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 13.654060] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 13.654936] sd 4:0:0:0: [sdb] Write Protect is off [ 13.654940] sd 4:0:0:0: [sdb] Mode Sense: 34 00 00 00 [ 13.654943] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 13.657933] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 13.657946] sdb: [ 13.767809] eth0: link down [ 13.768289] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.812706] type=1400 audit(1293689215.817:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=967 comm="apparmor_parser" [ 13.816020] type=1400 audit(1293689215.817:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=968 comm="apparmor_parser" [ 13.816693] type=1400 audit(1293689215.817:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 comm="apparmor_parser" [ 13.817058] type=1400 audit(1293689215.817:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser" [ 13.825655] type=1400 audit(1293689215.827:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=973 comm="apparmor_parser" [ 13.826183] type=1400 audit(1293689215.827:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=970 comm="apparmor_parser" [ 14.013462] sdb1 [ 14.015840] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 14.015845] sd 4:0:0:0: [sdb] Attached SCSI disk [ 14.222033] wlan0: ethernet device d8:5d:4c:93:59:8e using NDIS driver: arusb_xp, version: 0x40700, NDIS version: 0x501, vendor: 'Atheros OTUS Wireless Network Adapter', 0CF3:1002.F.conf [ 14.222100] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 14.222168] usbcore: registered new interface driver ndiswrapper [ 14.223273] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.251743] ndiswrapper: changing interface name from 'wlan0' to 'wlan1' [ 14.251787] udev[354]: renamed network interface wlan0 to wlan1 [ 14.255140] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 15.488187] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.721551] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 16.795533] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 16.846543] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 25.832431] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 25.838685] ISOFS: changing to secondary root [ 25.870759] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 25.957397] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 26.010111] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 30.019233] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 40.372358] wlan1: no IPv6 routers present [ 79.123241] usb 1-1: USB disconnect, address 2 [ 79.341795] ndiswrapper: device wlan1 removed [ 112.840018] usb 1-1: new high speed USB device using ehci_hcd and address 7 [ 127.292180] cfg80211: Calling CRDA to update world regulatory domain [ 127.354021] cfg80211: World regulatory domain updated: [ 127.354025] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 127.354028] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 127.354031] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 127.354034] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 127.354037] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 127.354039] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 127.491268] usb 1-1: reset high speed USB device using ehci_hcd and address 7 [ 128.670770] usbcore: registered new interface driver ar9170usb [ 129.026986] ath: EEPROM regdomain: 0x809c [ 129.026991] ath: EEPROM indicates we should expect a country code [ 129.026994] ath: doing EEPROM country->regdmn map search [ 129.026996] ath: country maps to regdmn code: 0x52 [ 129.026999] ath: Country alpha2 being used: CN [ 129.027002] ath: Regpair used: 0x52 [ 129.043118] phy0: Selected rate control algorithm 'minstrel' [ 129.043917] cfg80211: Calling CRDA for country: CN [ 129.044891] Registered led device: ar9170-phy0::tx [ 129.044914] Registered led device: ar9170-phy0::assoc [ 129.044916] usb 1-1: Atheros AR9170 is registered as 'phy0' [ 129.048882] cfg80211: Regulatory domain changed to country: CN [ 129.048886] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 129.048889] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 129.048891] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 129.071857] udev[549]: renamed network interface wlan0 to wlan1 [ 130.301540] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 133.407475] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1) [ 133.409098] wlan1: authenticated [ 133.409114] wlan1: associate with d8:5d:4c:f8:52:bf (try 1) [ 133.412851] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1) [ 133.412855] wlan1: associated [ 133.455383] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 133.979131] Intel AES-NI instructions are not detected. [ 134.014106] padlock: VIA PadLock not detected. [ 143.751262] wlan1: no IPv6 routers present [ 369.073341] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3) [ 369.131838] cfg80211: All devices are disconnected, going to restore regulatory settings [ 369.131845] cfg80211: Restoring regulatory settings [ 369.131850] cfg80211: Calling CRDA to update world regulatory domain [ 369.140954] cfg80211: World regulatory domain updated: [ 369.140958] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 369.140963] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 369.140967] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 369.140970] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 369.140974] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 369.140978] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 380.924205] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 383.937577] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1) [ 383.939444] wlan1: authenticated [ 383.939464] wlan1: associate with d8:5d:4c:f8:52:bf (try 1) [ 383.943445] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1) [ 383.943449] wlan1: associated [ 383.985237] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 394.091260] wlan1: no IPv6 routers present [ 404.323854] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3) [ 404.381418] cfg80211: All devices are disconnected, going to restore regulatory settings [ 404.381425] cfg80211: Restoring regulatory settings [ 404.381430] cfg80211: Calling CRDA to update world regulatory domain [ 404.387391] cfg80211: World regulatory domain updated: [ 404.387396] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 404.387401] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 404.387404] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 404.387408] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 404.387412] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 404.387416] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 425.184099] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 428.218096] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1) [ 428.219713] wlan1: authenticated [ 428.219733] wlan1: associate with d8:5d:4c:f8:52:bf (try 1) [ 428.223716] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1) [ 428.223720] wlan1: associated [ 428.277628] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 438.421262] wlan1: no IPv6 routers present [ 579.280317] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3) [ 579.352324] cfg80211: All devices are disconnected, going to restore regulatory settings [ 579.352330] cfg80211: Restoring regulatory settings [ 579.352334] cfg80211: Calling CRDA to update world regulatory domain [ 579.360661] cfg80211: World regulatory domain updated: [ 579.360665] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 579.360668] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 579.360671] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 579.360674] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 579.360677] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 579.360680] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 596.042027] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 599.059206] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1) [ 599.063569] wlan1: authenticated [ 599.063591] wlan1: associate with d8:5d:4c:f8:52:bf (try 1) [ 599.068700] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1) [ 599.068704] wlan1: associated [ 599.115111] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 609.181387] wlan1: no IPv6 routers present [ 613.113818] wlan1: deauthenticating from d8:5d:4c:f8:52:bf by local choice (reason=3) [ 613.161856] cfg80211: All devices are disconnected, going to restore regulatory settings [ 613.161863] cfg80211: Restoring regulatory settings [ 613.161867] cfg80211: Calling CRDA to update world regulatory domain [ 613.165194] cfg80211: World regulatory domain updated: [ 613.165197] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 613.165200] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 613.165203] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 613.165206] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 613.165209] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 613.165212] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 625.334288] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 628.351614] wlan1: authenticate with d8:5d:4c:f8:52:bf (try 1) [ 628.353458] wlan1: authenticated [ 628.353485] wlan1: associate with d8:5d:4c:f8:52:bf (try 1) [ 628.357457] wlan1: RX AssocResp from d8:5d:4c:f8:52:bf (capab=0x411 status=0 aid=1) [ 628.357461] wlan1: associated [ 628.405065] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 638.601258] wlan1: no IPv6 routers present [ 838.813699] 6:1:1: endpoint lacks sample rate attribute bit, cannot set. [ 1493.281765] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
Attachment:
Screenshot-Connection Information-1.png
Description: PNG image
1293689828.017120: wlan1 (phy #0): scan started 1293689829.455946: wlan1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472, "" 1293689829.492975: wlan1 (phy #0): scan started 1293689830.925943: wlan1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472, "CHIN_WIRELESS" 1293689831.008101: wlan1 (phy #0): auth d8:5d:4c:f8:52:bf -> d8:5d:4c:93:59:8e status: 0: Successful 1293689831.012430: wlan1: new station d8:5d:4c:f8:52:bf 1293689831.059803: wlan1 (phy #0): assoc d8:5d:4c:f8:52:bf -> d8:5d:4c:93:59:8e status: 0: Successful 1293689831.059885: wlan1 (phy #0): connected to d8:5d:4c:f8:52:bf 1293689848.003408: wlan1 (phy #0): scan started 1293689850.105933: wlan1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472, ""
