From: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
When returning to the operating channel, a full HW
reset has to be done instead of a fast channel change.
Since sw_scan_complete() is called after the config() call for the
home channel, we end up doing a FCC. Fix this issue by checking
the OFFCHANNEL flag to determine FCC.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/htc.h | 19 +++++++++----------
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 8 ++------
2 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 1062274..34456a8 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -331,16 +331,15 @@ void ath_htc_cancel_btcoex_work(struct ath9k_htc_priv *priv);
#define OP_INVALID BIT(0)
#define OP_SCANNING BIT(1)
-#define OP_FULL_RESET BIT(2)
-#define OP_LED_ASSOCIATED BIT(3)
-#define OP_LED_ON BIT(4)
-#define OP_PREAMBLE_SHORT BIT(5)
-#define OP_PROTECT_ENABLE BIT(6)
-#define OP_ASSOCIATED BIT(7)
-#define OP_ENABLE_BEACON BIT(8)
-#define OP_LED_DEINIT BIT(9)
-#define OP_BT_PRIORITY_DETECTED BIT(10)
-#define OP_BT_SCAN BIT(11)
+#define OP_LED_ASSOCIATED BIT(2)
+#define OP_LED_ON BIT(3)
+#define OP_PREAMBLE_SHORT BIT(4)
+#define OP_PROTECT_ENABLE BIT(5)
+#define OP_ASSOCIATED BIT(6)
+#define OP_ENABLE_BEACON BIT(7)
+#define OP_LED_DEINIT BIT(8)
+#define OP_BT_PRIORITY_DETECTED BIT(9)
+#define OP_BT_SCAN BIT(10)
struct ath9k_htc_priv {
struct device *dev;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 07f10dd..6da5e88 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -177,7 +177,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
struct ath_hw *ah = priv->ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
- bool fastcc = true;
+ bool fastcc;
struct ieee80211_channel *channel = hw->conf.channel;
struct ath9k_hw_cal_data *caldata;
enum htc_phymode mode;
@@ -188,8 +188,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
if (priv->op_flags & OP_INVALID)
return -EIO;
- if (priv->op_flags & OP_FULL_RESET)
- fastcc = false;
+ fastcc = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
ath9k_htc_ps_wakeup(priv);
htc_stop(priv->htc);
@@ -231,8 +230,6 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
goto err;
htc_start(priv->htc);
-
- priv->op_flags &= ~OP_FULL_RESET;
err:
ath9k_htc_ps_restore(priv);
return ret;
@@ -1847,7 +1844,6 @@ static void ath9k_htc_sw_scan_complete(struct ieee80211_hw *hw)
spin_lock_bh(&priv->beacon_lock);
priv->op_flags &= ~OP_SCANNING;
spin_unlock_bh(&priv->beacon_lock);
- priv->op_flags |= OP_FULL_RESET;
if (priv->op_flags & OP_ASSOCIATED) {
ath9k_htc_beacon_config(priv, priv->vif);
ath_start_ani(priv);
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
