Search Linux Wireless

[PATCH] rtlwifi: rtl8192ce: Fix driver problem when radio switch off at module load

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If the radio enable switch is off when the driver is loaded, it is not
possible to get radio output until the driver is unloaded and reloaded
with the switch on.

Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---

Index: wireless-testing/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ wireless-testing/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -962,17 +962,6 @@ int rtl92ce_hw_init(struct ieee80211_hw
 	rtl_cam_reset_all_entry(hw);
 	rtl92ce_enable_hw_security_config(hw);
 	ppsc->rfpwr_state = ERFON;
-	tmp_u1b = rtl_read_byte(rtlpriv, REG_MAC_PINMUX_CFG)&(~BIT(3));
-	rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, tmp_u1b);
-	tmp_u1b = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
-	ppsc->rfoff_reason |= (tmp_u1b & BIT(3)) ? 0 : RF_CHANGE_BY_HW;
-	if (ppsc->rfoff_reason > RF_CHANGE_BY_PS)
-		rtl_ps_set_rf_state(hw, ERFOFF, ppsc->rfoff_reason, true);
-	else {
-		ppsc->rfpwr_state = ERFON;
-		ppsc->rfoff_reason = 0;
-		rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
-	}
 	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
 	_rtl92ce_enable_aspm_back_door(hw);
 	rtlpriv->intf_ops->enable_aspm(hw);
Index: wireless-testing/drivers/net/wireless/rtlwifi/base.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/rtlwifi/base.c
+++ wireless-testing/drivers/net/wireless/rtlwifi/base.c
@@ -251,16 +251,14 @@ void rtl_init_rfkill(struct ieee80211_hw
 	bool blocked;
 	u8 valid = 0;
 
-	/*set init state to rf on */
-	rtlpriv->rfkill.rfkill_state = 1;
-
 	radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
 
-	if (valid) {
-		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
-			 (KERN_INFO "wireless switch is %s\n",
-			  rtlpriv->rfkill.rfkill_state ? "on" : "off"));
+	/*set init state to that of switch */
+	rtlpriv->rfkill.rfkill_state = radio_state;
+	printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
+	       rtlpriv->rfkill.rfkill_state ? "on" : "off");
 
+	if (valid) {
 		rtlpriv->rfkill.rfkill_state = radio_state;
 
 		blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1;

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux