On Wed, 2010-12-01 at 11:58 +0200, Roger Quadros wrote: > From: Roger Quadros <roger.quadros@xxxxxxxxx> > > This module enables individually generating RX and TX traffic > over the SDIO bus on which the WL1271 chipset is connected. > This is required to perform RF interference testing. > > The module takes 2 module parameters 'rx' and 'tx'. > > To generate RX traffic: > modprobe wl1271_sdio_test rx=1 > To generate TX traffic: > modprobe wl1271_sdio_test tx=1 > > To generate both RX & TX traffic, set both rx and tx to 1. > > You can change the testing configuration at runtime by changing > the rx & tx values at /sys/modules/wl1271_sdio_test/ > > To stop testing simply unload the module. > > Signed-off-by: Roger Quadros <roger.quadros@xxxxxxxxx> > Reviewed-by: Carlos Chinea <carlos.chinea@xxxxxxxxx> > --- Thanks Roger. Applied. -- Cheers, Luca. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
