Hi guys, I've made my device work with p54 without any hassle, so I wanted to report it. This is an usb adpator widely provided by telefonica, here in spain. A search based on the first couple of numbers of it's mac address (00:14:A5), reveals this is the vendor and the model: http://www.gemtek.com.tw/pro_wubi100.html A picture of it can be found here: http://www.zero13wireless.net/wireless/Mods_Wireless/GW3887AIK-usb.jpg I also took the EMF protection cover out to see what was inside, but didn't take any pictures either. If you might need them, just let me know; there is just another two smaller chips under (an ISL, and other I don't rembember now). Although the supplied windows drivers for this device are called prisma02, and in fact match the ones supplied by sparklan for it's model WL-682, I couldn't make it work with ndiswrapper, due to it returning `0xc010005' on a permanent basis, which ndiswrapper's source defines as sort of "unable to initialize due to chip not found or chip/driver mistmatch". Anyways, I just had to add the following line to `drivers/net/wireless/p54/p54usb.c' on a stock 2.6.30 kernel, prior to recompilation and installing the module to make it work: {USB_DEVICE (0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */ And about the firmware, it does work with stock p54's `2.13.24.0.lm87.arm' found on the website, so I just had to copy it to `/lib/firmware' while renaming it to `isl3887usb'. Thanks so much for your code and support, and do not hetisate to contact me if you need any further assistance on my side. Regards, -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
