From: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
Multiple devices use almost the same .cfg with minor differences.
Use macro and remove the duplication. By doing this, reduce
the chance for mistake while modify .cfg parameters
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-1000.c | 65 +++----
drivers/net/wireless/iwlwifi/iwl-5000.c | 89 +++------
drivers/net/wireless/iwlwifi/iwl-6000.c | 319 +++++++++----------------------
3 files changed, 151 insertions(+), 322 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 94521d4..ba78bc8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -276,60 +276,49 @@ static struct iwl_ht_params iwl1000_ht_params = {
.use_rts_for_aggregation = true, /* use rts/cts protection */
};
+#define IWL_DEVICE_1000 \
+ .fw_name_pre = IWL1000_FW_PRE, \
+ .ucode_api_max = IWL1000_UCODE_API_MAX, \
+ .ucode_api_min = IWL1000_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
+ .ops = &iwl1000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl1000_base_params, \
+ .led_mode = IWL_LED_BLINK
+
struct iwl_cfg iwl1000_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
- .fw_name_pre = IWL1000_FW_PRE,
- .ucode_api_max = IWL1000_UCODE_API_MAX,
- .ucode_api_min = IWL1000_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
+ IWL_DEVICE_1000,
.ht_params = &iwl1000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl1000_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
- .fw_name_pre = IWL1000_FW_PRE,
- .ucode_api_max = IWL1000_UCODE_API_MAX,
- .ucode_api_min = IWL1000_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
- .led_mode = IWL_LED_BLINK,
+ IWL_DEVICE_1000,
};
+#define IWL_DEVICE_100 \
+ .fw_name_pre = IWL100_FW_PRE, \
+ .ucode_api_max = IWL100_UCODE_API_MAX, \
+ .ucode_api_min = IWL100_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
+ .ops = &iwl1000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl1000_base_params, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .rx_with_siso_diversity = true
+
struct iwl_cfg iwl100_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BGN",
- .fw_name_pre = IWL100_FW_PRE,
- .ucode_api_max = IWL100_UCODE_API_MAX,
- .ucode_api_min = IWL100_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
+ IWL_DEVICE_100,
.ht_params = &iwl1000_ht_params,
- .led_mode = IWL_LED_RF_STATE,
- .rx_with_siso_diversity = true,
};
struct iwl_cfg iwl100_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BG",
- .fw_name_pre = IWL100_FW_PRE,
- .ucode_api_max = IWL100_UCODE_API_MAX,
- .ucode_api_min = IWL100_UCODE_API_MIN,
- .eeprom_ver = EEPROM_1000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
- .ops = &iwl1000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl1000_base_params,
- .led_mode = IWL_LED_RF_STATE,
- .rx_with_siso_diversity = true,
+ IWL_DEVICE_100,
};
MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 34af9e0..79ab0a6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -520,65 +520,44 @@ static struct iwl_ht_params iwl5000_ht_params = {
.use_rts_for_aggregation = true, /* use rts/cts protection */
};
+#define IWL_DEVICE_5000 \
+ .fw_name_pre = IWL5000_FW_PRE, \
+ .ucode_api_max = IWL5000_UCODE_API_MAX, \
+ .ucode_api_min = IWL5000_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_5000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, \
+ .ops = &iwl5000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl5000_base_params, \
+ .led_mode = IWL_LED_BLINK
+
struct iwl_cfg iwl5300_agn_cfg = {
.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
+ IWL_DEVICE_5000,
.ht_params = &iwl5000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_bgn_cfg = {
.name = "Intel(R) WiFi Link 5100 BGN",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
+ IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_abg_cfg = {
.name = "Intel(R) WiFi Link 5100 ABG",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
+ IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5100_agn_cfg = {
.name = "Intel(R) WiFi Link 5100 AGN",
- .fw_name_pre = IWL5000_FW_PRE,
- .ucode_api_max = IWL5000_UCODE_API_MAX,
- .ucode_api_min = IWL5000_UCODE_API_MIN,
+ IWL_DEVICE_5000,
.valid_tx_ant = ANT_B, /* .cfg overwrite */
.valid_rx_ant = ANT_AB, /* .cfg overwrite */
- .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .ops = &iwl5000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl5350_agn_cfg = {
@@ -596,35 +575,29 @@ struct iwl_cfg iwl5350_agn_cfg = {
.internal_wimax_coex = true,
};
+#define IWL_DEVICE_5150 \
+ .fw_name_pre = IWL5150_FW_PRE, \
+ .ucode_api_max = IWL5150_UCODE_API_MAX, \
+ .ucode_api_min = IWL5150_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_5050_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \
+ .ops = &iwl5150_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl5000_base_params, \
+ .need_dc_calib = true, \
+ .led_mode = IWL_LED_BLINK, \
+ .internal_wimax_coex = true
+
struct iwl_cfg iwl5150_agn_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",
- .fw_name_pre = IWL5150_FW_PRE,
- .ucode_api_max = IWL5150_UCODE_API_MAX,
- .ucode_api_min = IWL5150_UCODE_API_MIN,
- .eeprom_ver = EEPROM_5050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
- .ops = &iwl5150_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
+ IWL_DEVICE_5150,
.ht_params = &iwl5000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
- .internal_wimax_coex = true,
+
};
struct iwl_cfg iwl5150_abg_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 ABG",
- .fw_name_pre = IWL5150_FW_PRE,
- .ucode_api_max = IWL5150_UCODE_API_MAX,
- .ucode_api_min = IWL5150_UCODE_API_MIN,
- .eeprom_ver = EEPROM_5050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
- .ops = &iwl5150_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl5000_base_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
- .internal_wimax_coex = true,
+ IWL_DEVICE_5150,
};
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index fe5f6d0..f4bec32 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -554,235 +554,156 @@ static struct iwl_bt_params iwl6000_bt_params = {
.bt_sco_disable = true,
};
+#define IWL_DEVICE_6005 \
+ .fw_name_pre = IWL6000G2A_FW_PRE, \
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \
+ .ops = &iwl6000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6000_g2_base_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE
+
struct iwl_cfg iwl6005_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
- .fw_name_pre = IWL6000G2A_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
+ IWL_DEVICE_6005,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
};
struct iwl_cfg iwl6005_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
- .fw_name_pre = IWL6000G2A_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
+ IWL_DEVICE_6005,
};
struct iwl_cfg iwl6005_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
- .fw_name_pre = IWL6000G2A_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
-};
+ IWL_DEVICE_6005,
+};
+
+#define IWL_DEVICE_6030 \
+ .fw_name_pre = IWL6000G2B_FW_PRE, \
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \
+ .ops = &iwl6000g2b_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6000_g2_base_params, \
+ .bt_params = &iwl6000_bt_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true, \
+ /* \
+ *Due to bluetooth, we transmit 2.4 GHz probes \
+ * only on antenna A \
+ */ \
+ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A
struct iwl_cfg iwl6030_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
+ IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6030_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ IWL_DEVICE_6030,
};
struct iwl_cfg iwl6030_2bgn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
+ IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6030_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ IWL_DEVICE_6030,
};
struct iwl_cfg iwl1030_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
+ IWL_DEVICE_6030,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl1030_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .need_temp_offset_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+ IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl130_bgn_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
+ IWL_DEVICE_6030,
+ .ht_params = &iwl6000_ht_params,
+ .rx_with_siso_diversity = true,
+};
+
+struct iwl_cfg iwl130_bg_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N 130 BG",
+ IWL_DEVICE_6030,
+ .rx_with_siso_diversity = true,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
+#define IWL_DEVICE_6000i \
+ .fw_name_pre = IWL6000_FW_PRE, \
+ .ucode_api_max = IWL6000_UCODE_API_MAX, \
+ .ucode_api_min = IWL6000_UCODE_API_MIN, \
+ .valid_tx_ant = ANT_BC, /* .cfg overwrite */ \
+ .valid_rx_ant = ANT_BC, /* .cfg overwrite */ \
+ .eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
+ .ops = &iwl6000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6000_base_params, \
+ .pa_type = IWL_PA_INTERNAL, \
+ .led_mode = IWL_LED_BLINK
+
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .valid_tx_ant = ANT_BC, /* .cfg overwrite */
- .valid_rx_ant = ANT_BC, /* .cfg overwrite */
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
+ IWL_DEVICE_6000i,
.ht_params = &iwl6000_ht_params,
- .pa_type = IWL_PA_INTERNAL,
- .led_mode = IWL_LED_BLINK,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .valid_tx_ant = ANT_BC, /* .cfg overwrite */
- .valid_rx_ant = ANT_BC, /* .cfg overwrite */
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
- .pa_type = IWL_PA_INTERNAL,
- .led_mode = IWL_LED_BLINK,
+ IWL_DEVICE_6000i,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .valid_tx_ant = ANT_BC, /* .cfg overwrite */
- .valid_rx_ant = ANT_BC, /* .cfg overwrite */
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .ops = &iwl6000_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_base_params,
- .pa_type = IWL_PA_INTERNAL,
- .led_mode = IWL_LED_BLINK,
-};
+ IWL_DEVICE_6000i,
+};
+
+#define IWL_DEVICE_6050 \
+ .fw_name_pre = IWL6050_FW_PRE, \
+ .ucode_api_max = IWL6050_UCODE_API_MAX, \
+ .ucode_api_min = IWL6050_UCODE_API_MIN, \
+ .ops = &iwl6050_ops, \
+ .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl6050_base_params, \
+ .need_dc_calib = true, \
+ .led_mode = IWL_LED_BLINK, \
+ .internal_wimax_coex = true
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
- .fw_name_pre = IWL6050_FW_PRE,
- .ucode_api_max = IWL6050_UCODE_API_MAX,
- .ucode_api_min = IWL6050_UCODE_API_MIN,
- .ops = &iwl6050_ops,
- .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6050_base_params,
+ IWL_DEVICE_6050,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
- .internal_wimax_coex = true,
+};
+
+struct iwl_cfg iwl6050_2abg_cfg = {
+ .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
+ IWL_DEVICE_6050,
};
struct iwl_cfg iwl6150_bgn_cfg = {
@@ -801,21 +722,6 @@ struct iwl_cfg iwl6150_bgn_cfg = {
.internal_wimax_coex = true,
};
-struct iwl_cfg iwl6050_2abg_cfg = {
- .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
- .fw_name_pre = IWL6050_FW_PRE,
- .ucode_api_max = IWL6050_UCODE_API_MAX,
- .ucode_api_min = IWL6050_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
- .ops = &iwl6050_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6050_base_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_BLINK,
- .internal_wimax_coex = true,
-};
-
struct iwl_cfg iwl6000_3agn_cfg = {
.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
.fw_name_pre = IWL6000_FW_PRE,
@@ -831,45 +737,6 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.led_mode = IWL_LED_BLINK,
};
-struct iwl_cfg iwl130_bgn_cfg = {
- .name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
- .ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .rx_with_siso_diversity = true,
-};
-
-struct iwl_cfg iwl130_bg_cfg = {
- .name = "Intel(R) Centrino(R) Wireless-N 130 BG",
- .fw_name_pre = IWL6000G2B_FW_PRE,
- .ucode_api_max = IWL6000G2_UCODE_API_MAX,
- .ucode_api_min = IWL6000G2_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
- .ops = &iwl6000g2b_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl6000_g2_base_params,
- .bt_params = &iwl6000_bt_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .adv_pm = true,
- /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
- .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .rx_with_siso_diversity = true,
-};
-
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
