Add wrapper functions in rt2x00queue.c to
start & stop queues. This control must be protected
using a mutex.
Queues can also be paused which will halt the flow
of packets between the driver and mac80211. This doesn't
require a mutex protection.
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2x00.h | 52 ++++++++
drivers/net/wireless/rt2x00/rt2x00config.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 5 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 22 +---
drivers/net/wireless/rt2x00/rt2x00lib.h | 9 --
drivers/net/wireless/rt2x00/rt2x00mac.c | 8 +-
drivers/net/wireless/rt2x00/rt2x00queue.c | 130 ++++++++++++++++++--
drivers/net/wireless/rt2x00/rt2x00queue.h | 23 ++++
drivers/net/wireless/rt2x00/rt2x00usb.c | 190 ++++++++++++++--------------
9 files changed, 302 insertions(+), 141 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 617d68f..511ca91 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1072,6 +1072,58 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
enum queue_index index);
+/**
+ * rt2x00queue_pause_queue - Pause a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will pause the data queue locally, preventing
+ * new frames to be added to the queue (while the hardware is
+ * still allowed to run).
+ */
+void rt2x00queue_pause_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_unpause_queue - unpause a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will unpause the data queue locally, allowing
+ * new frames to be added to the queue again.
+ */
+void rt2x00queue_unpause_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_start_queue - Start a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will start handling all pending frames in the queue.
+ */
+void rt2x00queue_start_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_stop_queue - Halt a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will stop all pending frames in the queue.
+ */
+void rt2x00queue_stop_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_start_queues - Start all data queues
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * This function will loop through all available queues to start them
+ */
+void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00queue_stop_queues - Halt all data queues
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * This function will loop through all available queues to stop
+ * any pending frames.
+ */
+void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
+
/*
* Debugfs handlers.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index d2f1f0a..70ca937 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -146,7 +146,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* else the changes will be ignored by the device.
*/
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
+ rt2x00queue_stop_queue(rt2x00dev->rx);
/*
* Write new antenna setup to device and reset the link tuner.
@@ -160,7 +160,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
memcpy(active, &config, sizeof(config));
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
+ rt2x00queue_start_queue(rt2x00dev->rx);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 64dfb1f..c92db32 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -339,12 +339,13 @@ static ssize_t rt2x00debug_read_queue_stats(struct file *file,
return -ENOMEM;
temp = data +
- sprintf(data, "qid\tcount\tlimit\tlength\tindex\tdma done\tdone\n");
+ sprintf(data, "qid\tflags\t\tcount\tlimit\tlength\tindex\tdma done\tdone\n");
queue_for_each(intf->rt2x00dev, queue) {
spin_lock_irqsave(&queue->index_lock, irqflags);
- temp += sprintf(temp, "%d\t%d\t%d\t%d\t%d\t%d\t%d\n", queue->qid,
+ temp += sprintf(temp, "%d\t0x%.8x\t%d\t%d\t%d\t%d\t%d\t\t%d\n",
+ queue->qid, (unsigned int)queue->flags,
queue->count, queue->limit, queue->length,
queue->index[Q_INDEX],
queue->index[Q_INDEX_DMA_DONE],
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8d864b6..fbc98dd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -66,9 +66,9 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
/*
- * Enable RX.
+ * Enable queues.
*/
- rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
+ rt2x00queue_start_queues(rt2x00dev);
rt2x00link_start_tuner(rt2x00dev);
/*
@@ -76,11 +76,6 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
*/
rt2x00link_start_watchdog(rt2x00dev);
- /*
- * Start the TX queues.
- */
- ieee80211_wake_queues(rt2x00dev->hw);
-
return 0;
}
@@ -90,21 +85,15 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
return;
/*
- * Stop the TX queues in mac80211.
- */
- ieee80211_stop_queues(rt2x00dev->hw);
- rt2x00queue_stop_queues(rt2x00dev);
-
- /*
* Stop watchdog monitoring.
*/
rt2x00link_stop_watchdog(rt2x00dev);
/*
- * Disable RX.
+ * Stop all queues
*/
rt2x00link_stop_tuner(rt2x00dev);
- rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
+ rt2x00queue_stop_queues(rt2x00dev);
/*
* Disable radio.
@@ -249,7 +238,6 @@ void rt2x00lib_txdone(struct queue_entry *entry,
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
unsigned int header_length, i;
u8 rate_idx, rate_flags, retry_rates;
u8 skbdesc_flags = skbdesc->flags;
@@ -400,7 +388,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
* is reenabled when the txdone handler has finished.
*/
if (!rt2x00queue_threshold(entry->queue))
- ieee80211_wake_queue(rt2x00dev->hw, qid);
+ rt2x00queue_unpause_queue(entry->queue);
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 2cf68f8..a105c50 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -178,15 +178,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
/**
- * rt2x00queue_stop_queues - Halt all data queues
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- *
- * This function will loop through all available queues to stop
- * any pending outgoing frames.
- */
-void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
-
-/**
* rt2x00queue_init_queues - Initialize all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 6713f1a..c4abb20 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -104,7 +104,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
enum data_queue_qid qid = skb_get_queue_mapping(skb);
- struct data_queue *queue;
+ struct data_queue *queue = NULL;
/*
* Mac80211 might be calling this function while we are trying
@@ -153,7 +153,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
goto exit_fail;
if (rt2x00queue_threshold(queue))
- ieee80211_stop_queue(rt2x00dev->hw, qid);
+ rt2x00queue_pause_queue(queue);
return NETDEV_TX_OK;
@@ -352,7 +352,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
* if for any reason the link tuner must be reset, this will be
* handled by rt2x00lib_config().
*/
- rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
+ rt2x00queue_stop_queue(rt2x00dev->rx);
/*
* When we've just turned on the radio, we want to reprogram
@@ -370,7 +370,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
/* Turn RX back on */
- rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
+ rt2x00queue_start_queue(rt2x00dev->rx);
return 0;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 2af6cea..558965f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -585,7 +585,7 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
rt2x00queue_free_skb(intf->beacon);
if (!enable_beacon) {
- rt2x00dev->ops->lib->stop_queue(intf->beacon->queue);
+ rt2x00queue_stop_queue(intf->beacon->queue);
mutex_unlock(&intf->beacon_skb_mutex);
return 0;
}
@@ -738,6 +738,125 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
+void rt2x00queue_pause_queue(struct data_queue *queue)
+{
+ if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+ !test_bit(QUEUE_STARTED, &queue->flags) ||
+ test_and_set_bit(QUEUE_PAUSED, &queue->flags))
+ return;
+
+ switch (queue->qid) {
+ case QID_AC_BE:
+ case QID_AC_BK:
+ case QID_AC_VI:
+ case QID_AC_VO:
+ /*
+ * For TX queues, we have to disable the queue
+ * inside mac80211.
+ */
+ ieee80211_stop_queue(queue->rt2x00dev->hw, queue->qid);
+ break;
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue);
+
+void rt2x00queue_unpause_queue(struct data_queue *queue)
+{
+ if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+ !test_bit(QUEUE_STARTED, &queue->flags) ||
+ !test_and_clear_bit(QUEUE_PAUSED, &queue->flags))
+ return;
+
+ switch (queue->qid) {
+ case QID_AC_BE:
+ case QID_AC_BK:
+ case QID_AC_VI:
+ case QID_AC_VO:
+ /*
+ * For TX queues, we have to enable the queue
+ * inside mac80211.
+ */
+ ieee80211_wake_queue(queue->rt2x00dev->hw, queue->qid);
+ break;
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_unpause_queue);
+
+void rt2x00queue_start_queue(struct data_queue *queue)
+{
+ mutex_lock(&queue->status_lock);
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+ test_and_set_bit(QUEUE_STARTED, &queue->flags)) {
+ mutex_unlock(&queue->status_lock);
+ return;
+ }
+
+ set_bit(QUEUE_PAUSED, &queue->flags);
+
+ queue->rt2x00dev->ops->lib->start_queue(queue);
+
+ rt2x00queue_unpause_queue(queue);
+
+ mutex_unlock(&queue->status_lock);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_start_queue);
+
+void rt2x00queue_stop_queue(struct data_queue *queue)
+{
+ mutex_lock(&queue->status_lock);
+
+ if (!test_and_clear_bit(QUEUE_STARTED, &queue->flags)) {
+ mutex_unlock(&queue->status_lock);
+ return;
+ }
+
+ rt2x00queue_pause_queue(queue);
+
+ queue->rt2x00dev->ops->lib->stop_queue(queue);
+
+ mutex_unlock(&queue->status_lock);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_stop_queue);
+
+void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+
+ /*
+ * rt2x00queue_start_queue will call ieee80211_wake_queue
+ * for each queue after is has been properly initialized.
+ */
+ tx_queue_for_each(rt2x00dev, queue)
+ rt2x00queue_start_queue(queue);
+
+ rt2x00queue_start_queue(rt2x00dev->rx);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_start_queues);
+
+void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+
+ /*
+ * rt2x00queue_stop_queue will call ieee80211_stop_queue
+ * as well, but we are completely shutting doing everything
+ * now, so it is much safer to stop all TX queues at once,
+ * and use rt2x00queue_stop_queue for cleaning up.
+ */
+ ieee80211_stop_queues(rt2x00dev->hw);
+
+ tx_queue_for_each(rt2x00dev, queue)
+ rt2x00queue_stop_queue(queue);
+
+ rt2x00queue_stop_queue(rt2x00dev->rx);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_stop_queues);
+
static void rt2x00queue_reset(struct data_queue *queue)
{
unsigned long irqflags;
@@ -756,14 +875,6 @@ static void rt2x00queue_reset(struct data_queue *queue)
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
-void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
-
- txall_queue_for_each(rt2x00dev, queue)
- rt2x00dev->ops->lib->stop_queue(queue);
-}
-
void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
@@ -905,6 +1016,7 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev)
static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
struct data_queue *queue, enum data_queue_qid qid)
{
+ mutex_init(&queue->status_lock);
spin_lock_init(&queue->index_lock);
queue->rt2x00dev = rt2x00dev;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 29b051a..baa39b7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -392,12 +392,32 @@ enum queue_index {
};
/**
+ * enum data_queue_flags: Status flags for data queues
+ *
+ * @QUEUE_STARTED: The queue has been started. Fox RX queues this means the
+ * device might be DMA'ing skbuffers. TX queues will accept skbuffers to
+ * be transmitted and beacon queues will start beaconing the configured
+ * beacons.
+ * @QUEUE_PAUSED: The queue has been started but is currently paused.
+ * When this bit is set, the queue has been stopped in mac80211,
+ * preventing new frames to be enqueued. However, a few frames
+ * might still appear shortly after the pausing...
+ */
+enum data_queue_flags {
+ QUEUE_STARTED,
+ QUEUE_PAUSED,
+};
+
+/**
* struct data_queue: Data queue
*
* @rt2x00dev: Pointer to main &struct rt2x00dev where this queue belongs to.
* @entries: Base address of the &struct queue_entry which are
* part of this queue.
* @qid: The queue identification, see &enum data_queue_qid.
+ * @flags: Entry flags, see &enum queue_entry_flags.
+ * @status_lock: The mutex for protecting the start/stop/flush
+ * handling on this queue.
* @index_lock: Spinlock to protect index handling. Whenever @index, @index_done or
* @index_crypt needs to be changed this lock should be grabbed to prevent
* index corruption due to concurrency.
@@ -421,8 +441,11 @@ struct data_queue {
struct queue_entry *entries;
enum data_queue_qid qid;
+ unsigned long flags;
+ struct mutex status_lock;
spinlock_t index_lock;
+
unsigned int count;
unsigned short limit;
unsigned short threshold;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index d4361dc..fca29ae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -261,6 +261,89 @@ static void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
}
}
+/*
+ * RX data handlers.
+ */
+static void rt2x00usb_work_rxdone(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, rxdone_work);
+ struct queue_entry *entry;
+ struct skb_frame_desc *skbdesc;
+ u8 rxd[32];
+
+ while (!rt2x00queue_empty(rt2x00dev->rx)) {
+ entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE);
+
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ break;
+
+ /*
+ * Fill in desc fields of the skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(entry->skb);
+ skbdesc->desc = rxd;
+ skbdesc->desc_len = entry->queue->desc_size;
+
+ /*
+ * Send the frame to rt2x00lib for further processing.
+ */
+ rt2x00lib_rxdone(entry);
+ }
+}
+
+static void rt2x00usb_interrupt_rxdone(struct urb *urb)
+{
+ struct queue_entry *entry = (struct queue_entry *)urb->context;
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+
+ if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ return;
+
+ /*
+ * Report the frame as DMA done
+ */
+ rt2x00lib_dmadone(entry);
+
+ /*
+ * Check if the received data is simply too small
+ * to be actually valid, or if the urb is signaling
+ * a problem.
+ */
+ if (urb->actual_length < entry->queue->desc_size || urb->status)
+ set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
+
+ /*
+ * Schedule the delayed work for reading the RX status
+ * from the device.
+ */
+ ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
+}
+
+static void rt2x00usb_kick_rx_entry(struct queue_entry *entry)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+ struct queue_entry_priv_usb *entry_priv = entry->priv_data;
+ int status;
+
+ if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ return;
+
+ usb_fill_bulk_urb(entry_priv->urb, usb_dev,
+ usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint),
+ entry->skb->data, entry->skb->len,
+ rt2x00usb_interrupt_rxdone, entry);
+
+ status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
+ if (status) {
+ if (status == -ENODEV)
+ clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+ set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
+ rt2x00lib_dmadone(entry);
+ }
+}
+
void rt2x00usb_kick_queue(struct data_queue *queue)
{
switch (queue->qid) {
@@ -272,6 +355,11 @@ void rt2x00usb_kick_queue(struct data_queue *queue)
rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
rt2x00usb_kick_tx_entry);
break;
+ case QID_RX:
+ if (!rt2x00queue_full(queue))
+ rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
+ rt2x00usb_kick_rx_entry);
+ break;
default:
break;
}
@@ -307,7 +395,6 @@ EXPORT_SYMBOL_GPL(rt2x00usb_stop_queue);
static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
- unsigned short threshold = queue->threshold;
WARNING(queue->rt2x00dev, "TX queue %d DMA timed out,"
" invoke forced forced reset\n", queue->qid);
@@ -315,18 +402,8 @@ static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
/*
* Temporarily disable the TX queue, this will force mac80211
* to use the other queues until this queue has been restored.
- *
- * Set the queue threshold to the queue limit. This prevents the
- * queue from being enabled during the txdone handler.
*/
- queue->threshold = queue->limit;
- ieee80211_stop_queue(rt2x00dev->hw, queue->qid);
-
- /*
- * Kill all entries in the queue, afterwards we need to
- * wait a bit for all URBs to be cancelled.
- */
- rt2x00usb_stop_queue(queue);
+ rt2x00queue_stop_queue(queue);
/*
* In case that a driver has overriden the txdone_work
@@ -338,8 +415,7 @@ static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
* The queue has been reset, and mac80211 is allowed to use the
* queue again.
*/
- queue->threshold = threshold;
- ieee80211_wake_queue(rt2x00dev->hw, queue->qid);
+ rt2x00queue_start_queue(queue);
}
static void rt2x00usb_watchdog_tx_status(struct data_queue *queue)
@@ -366,73 +442,12 @@ void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
/*
- * RX data handlers.
- */
-static void rt2x00usb_work_rxdone(struct work_struct *work)
-{
- struct rt2x00_dev *rt2x00dev =
- container_of(work, struct rt2x00_dev, rxdone_work);
- struct queue_entry *entry;
- struct skb_frame_desc *skbdesc;
- u8 rxd[32];
-
- while (!rt2x00queue_empty(rt2x00dev->rx)) {
- entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE);
-
- if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
- break;
-
- /*
- * Fill in desc fields of the skb descriptor
- */
- skbdesc = get_skb_frame_desc(entry->skb);
- skbdesc->desc = rxd;
- skbdesc->desc_len = entry->queue->desc_size;
-
- /*
- * Send the frame to rt2x00lib for further processing.
- */
- rt2x00lib_rxdone(entry);
- }
-}
-
-static void rt2x00usb_interrupt_rxdone(struct urb *urb)
-{
- struct queue_entry *entry = (struct queue_entry *)urb->context;
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-
- if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
- return;
-
- /*
- * Report the frame as DMA done
- */
- rt2x00lib_dmadone(entry);
-
- /*
- * Check if the received data is simply too small
- * to be actually valid, or if the urb is signaling
- * a problem.
- */
- if (urb->actual_length < entry->queue->desc_size || urb->status)
- set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
-
- /*
- * Schedule the delayed work for reading the RX status
- * from the device.
- */
- ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
-}
-
-/*
* Radio handlers
*/
void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
REGISTER_TIMEOUT);
-
- rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
}
EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
@@ -441,31 +456,10 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
*/
void rt2x00usb_clear_entry(struct queue_entry *entry)
{
- struct usb_device *usb_dev =
- to_usb_device_intf(entry->queue->rt2x00dev->dev);
- struct queue_entry_priv_usb *entry_priv = entry->priv_data;
- int pipe;
- int status;
-
entry->flags = 0;
- if (entry->queue->qid == QID_RX) {
- pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint);
- usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe,
- entry->skb->data, entry->skb->len,
- rt2x00usb_interrupt_rxdone, entry);
-
- set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-
- status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- if (status) {
- if (status == -ENODEV)
- clear_bit(DEVICE_STATE_PRESENT,
- &entry->queue->rt2x00dev->flags);
- set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
- rt2x00lib_dmadone(entry);
- }
- }
+ if (entry->queue->qid == QID_RX)
+ rt2x00usb_kick_rx_entry(entry);
}
EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry);
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
