Search Linux Wireless

[PATCH] ath9k: clean up hardware code for beacon handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mohammed Shafi Shajakhan <mshajakhan@xxxxxxxxxxx>

The registers TBTT_TIMER ,DMA_BEACON_ALERT ,NEXT_SWBA are need to be
configured only for AP and IBSS mode.

SWBA register is used for generating software interrupts so that beacon
frames will be created by the software.DMA beacon alert register is
to indicate the hardware to DMA the contents of beacon buffer to PCU buffer
and TBTT to start transmitting the packet buffer to the base band.
Clearly these things are not needed for station/monitor mode so
remove configuring them.

Cc: doug dahlby <ddahlby@xxxxxxxxxxx>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/hw.c |   14 --------------
 1 files changed, 0 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 516227f..1beb896 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1632,12 +1632,6 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 	ENABLE_REGWRITE_BUFFER(ah);
 
 	switch (ah->opmode) {
-	case NL80211_IFTYPE_STATION:
-		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
-		REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
-		REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
-		flags |= AR_TBTT_TIMER_EN;
-		break;
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_MESH_POINT:
 		REG_SET_BIT(ah, AR_TXCFG,
@@ -1661,14 +1655,6 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 			AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
 		break;
 	default:
-		if (ah->is_monitoring) {
-			REG_WRITE(ah, AR_NEXT_TBTT_TIMER,
-					TU_TO_USEC(next_beacon));
-			REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
-			REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
-			flags |= AR_TBTT_TIMER_EN;
-			break;
-		}
 		ath_dbg(ath9k_hw_common(ah), ATH_DBG_BEACON,
 			"%s: unsupported opmode: %d\n",
 			__func__, ah->opmode);
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux