mac80211 will notify drivers when to go idle and ath9k assumed that it would get further notifications for idle states after a device stop() config call but as per agreed semantics the idle state of the radio is left up to driver after mac80211 issues the stop() callback. The driver is resposnbile for ensuring the device remains idle after that even between suspend / resume calls. This fixes suspend/resume when you issue suspend and resume twice on ath9k when ath9k_stop() was already called. We need to put the radio to full sleep in order for resume to work correctly. What might seem fishy is we are turning the radio off after resume. The reason why we do this is because we know we should not have anything enabled after a mac80211 tells us to stop(), if we resume and never get a start() we won't get another stop() by mac80211 so to be safe always bring the 802.11 device with the radio disabled after resume, this ensures that if we suspend we already have the radio disabled and only a start() will ever trigger it on. Cc: stable@xxxxxxxxxx Cc: Paul Stewart <pstew@xxxxxxxxxx> Cc: Amod Bodas <amod.bodas@xxxxxxxxxxx> Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/main.c | 4 ++-- drivers/net/wireless/ath/ath9k/pci.c | 3 +++ 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index be19b70..669fe6c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1330,8 +1330,8 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath9k_ps_restore(sc); - /* Finally, put the chip in FULL SLEEP mode */ - ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP); + sc->ps_idle = true; + ath_radio_disable(sc, hw); sc->sc_flags |= SC_OP_INVALID; diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 747b287..7ca8499 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -309,6 +309,9 @@ static int ath_pci_resume(struct device *device) AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); + sc->ps_idle = true; + ath_radio_disable(sc, hw); + return 0; } -- 1.7.3.2.90.gd4c43 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
