From: Johannes Berg <johannes.berg@xxxxxxxxx>
Instead of tying mesh activity to interface up,
add join and leave commands for mesh. Since we
must be backward compatible, let cfg80211 handle
joining a mesh if a mesh ID was pre-configured
when the device goes up.
Note that this therefore must modify mac80211 as
well since mac80211 needs to lose the logic to
start the mesh on interface up.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
include/linux/nl80211.h | 7 ++
include/net/cfg80211.h | 9 +--
net/mac80211/cfg.c | 31 ++++++++--
net/mac80211/ieee80211_i.h | 13 ----
net/mac80211/iface.c | 14 ----
net/mac80211/mesh.c | 20 ------
net/mac80211/mesh.h | 23 -------
net/wireless/Makefile | 2
net/wireless/core.c | 14 ++++
net/wireless/core.h | 13 ++++
net/wireless/mesh.c | 133 +++++++++++++++++++++++++++++++++++++++++++++
net/wireless/nl80211.c | 84 +++++++++++++++++++++++++---
12 files changed, 273 insertions(+), 90 deletions(-)
--- wireless-testing.orig/include/linux/nl80211.h 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/include/linux/nl80211.h 2010-12-01 21:40:18.000000000 +0100
@@ -394,6 +394,10 @@
*
* @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
*
+ * @NL80211_CMD_JOIN_MESH: Join a mesh ...
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ * network is determined by the network interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -500,6 +504,9 @@ enum nl80211_commands {
NL80211_CMD_FRAME_WAIT_CANCEL,
+ NL80211_CMD_JOIN_MESH,
+ NL80211_CMD_LEAVE_MESH,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
--- wireless-testing.orig/include/net/cfg80211.h 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/include/net/cfg80211.h 2010-12-01 21:40:18.000000000 +0100
@@ -258,13 +258,9 @@ struct ieee80211_supported_band {
/**
* struct vif_params - describes virtual interface parameters
- * @mesh_id: mesh ID to use
- * @mesh_id_len: length of the mesh ID
* @use_4addr: use 4-address frames
*/
struct vif_params {
- u8 *mesh_id;
- int mesh_id_len;
int use_4addr;
};
@@ -1223,6 +1219,11 @@ struct cfg80211_ops {
int (*set_mesh_params)(struct wiphy *wiphy,
struct net_device *dev,
const struct mesh_config *nconf, u32 mask);
+ int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *mesh_id, size_t mesh_id_len,
+ const struct mesh_config *conf);
+ int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
+
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
struct bss_parameters *params);
--- wireless-testing.orig/net/wireless/Makefile 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/wireless/Makefile 2010-12-01 21:40:18.000000000 +0100
@@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o
obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o
cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o
--- wireless-testing.orig/net/wireless/core.h 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/wireless/core.h 2010-12-01 21:45:44.000000000 +0100
@@ -285,6 +285,19 @@ void __cfg80211_ibss_joined(struct net_d
int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev);
+/* mesh */
+extern const struct mesh_config default_mesh_config;
+int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ const u8 *mesh_id, size_t mesh_id_len,
+ const struct mesh_config *conf);
+int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ const u8 *mesh_id, size_t mesh_id_len,
+ const struct mesh_config *conf);
+int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev);
+
/* MLME */
int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
struct net_device *dev,
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ wireless-testing/net/wireless/mesh.c 2010-12-01 21:45:49.000000000 +0100
@@ -0,0 +1,133 @@
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "core.h"
+
+/* Default values, timeouts in ms */
+#define MESH_TTL 31
+#define MESH_MAX_RETR 3
+#define MESH_RET_T 100
+#define MESH_CONF_T 100
+#define MESH_HOLD_T 100
+
+#define MESH_PATH_TIMEOUT 5000
+/* Minimum interval between two consecutive PREQs originated by the same
+ * interface
+ */
+#define MESH_PREQ_MIN_INT 10
+#define MESH_DIAM_TRAVERSAL_TIME 50
+/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before
+ * timing out. This way it will remain ACTIVE and no data frames will be
+ * unnecesarily held in the pending queue.
+ */
+#define MESH_PATH_REFRESH_TIME 1000
+#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
+
+/* Default maximum number of established plinks per interface */
+#define MESH_MAX_ESTAB_PLINKS 32
+
+#define MESH_MAX_PREQ_RETRIES 4
+
+
+const struct mesh_config default_mesh_config = {
+ .dot11MeshRetryTimeout = MESH_RET_T,
+ .dot11MeshConfirmTimeout = MESH_CONF_T,
+ .dot11MeshHoldingTimeout = MESH_HOLD_T,
+ .dot11MeshMaxRetries = MESH_MAX_RETR,
+ .dot11MeshTTL = MESH_TTL,
+ .auto_open_plinks = true,
+ .dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
+ .dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
+ .dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
+ .dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
+ .dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
+ .path_refresh_time = MESH_PATH_REFRESH_TIME,
+ .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
+};
+
+int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ const u8 *mesh_id, size_t mesh_id_len,
+ const struct mesh_config *conf)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+ return -EOPNOTSUPP;
+
+ if (wdev->ssid_len)
+ return -EALREADY;
+
+ if (!mesh_id_len)
+ return -EINVAL;
+
+ if (!rdev->ops->join_mesh)
+ return -EOPNOTSUPP;
+
+ if (!conf)
+ conf = &default_mesh_config;
+
+ err = rdev->ops->join_mesh(&rdev->wiphy, dev, mesh_id, mesh_id_len,
+ conf);
+ if (!err) {
+ memcpy(wdev->ssid, mesh_id, mesh_id_len);
+ wdev->ssid_len = mesh_id_len;
+ }
+
+ return err;
+}
+
+int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ const u8 *mesh_id, size_t mesh_id_len,
+ const struct mesh_config *conf)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_join_mesh(rdev, dev, mesh_id, mesh_id_len, conf);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->leave_mesh)
+ return -EOPNOTSUPP;
+
+ if (!wdev->ssid_len)
+ return -ENOTCONN;
+
+ err = rdev->ops->leave_mesh(&rdev->wiphy, dev);
+ if (!err)
+ wdev->ssid_len = 0;
+ return err;
+}
+
+int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_leave_mesh(rdev, dev);
+ wdev_unlock(wdev);
+
+ return err;
+}
--- wireless-testing.orig/net/wireless/nl80211.c 2010-12-01 21:39:52.000000000 +0100
+++ wireless-testing/net/wireless/nl80211.c 2010-12-01 21:43:32.000000000 +0100
@@ -668,6 +668,7 @@ static int nl80211_send_wiphy(struct sk_
CMD(deauth, DEAUTHENTICATE);
CMD(disassoc, DISASSOCIATE);
CMD(join_ibss, JOIN_IBSS);
+ CMD(join_mesh, JOIN_MESH);
CMD(set_pmksa, SET_PMKSA);
CMD(del_pmksa, DEL_PMKSA);
CMD(flush_pmksa, FLUSH_PMKSA);
@@ -1324,11 +1325,20 @@ static int nl80211_set_interface(struct
}
if (info->attrs[NL80211_ATTR_MESH_ID]) {
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
if (ntype != NL80211_IFTYPE_MESH_POINT)
return -EINVAL;
- params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
- params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
- change = true;
+ if (netif_running(dev))
+ return -EBUSY;
+
+ wdev_lock(wdev);
+ BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
+ IEEE80211_MAX_MESH_ID_LEN);
+ wdev->ssid_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
+ memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
+ wdev->ssid_len);
+ wdev_unlock(wdev);
}
if (info->attrs[NL80211_ATTR_4ADDR]) {
@@ -1388,12 +1398,6 @@ static int nl80211_new_interface(struct
!(rdev->wiphy.interface_modes & (1 << type)))
return -EOPNOTSUPP;
- if (type == NL80211_IFTYPE_MESH_POINT &&
- info->attrs[NL80211_ATTR_MESH_ID]) {
- params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
- params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
- }
-
if (info->attrs[NL80211_ATTR_4ADDR]) {
params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]);
err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type);
@@ -1410,6 +1414,19 @@ static int nl80211_new_interface(struct
if (IS_ERR(dev))
return PTR_ERR(dev);
+ if (type == NL80211_IFTYPE_MESH_POINT &&
+ info->attrs[NL80211_ATTR_MESH_ID]) {
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ wdev_lock(wdev);
+ BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
+ IEEE80211_MAX_MESH_ID_LEN);
+ wdev->ssid_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
+ memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
+ wdev->ssid_len);
+ wdev_unlock(wdev);
+ }
+
return 0;
}
@@ -4499,6 +4516,39 @@ out:
return err;
}
+static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct mesh_config cfg;
+ int err;
+
+ /* start with default */
+ memcpy(&cfg, &default_mesh_config, sizeof(cfg));
+
+ /* and parse other given info */
+ err = nl80211_parse_mesh_params(info, &cfg, NULL);
+ if (err)
+ return err;
+
+ if (!info->attrs[NL80211_ATTR_MESH_ID] ||
+ !nla_len(info->attrs[NL80211_ATTR_MESH_ID]))
+ return -EINVAL;
+
+ return cfg80211_join_mesh(rdev, dev,
+ nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
+ nla_len(info->attrs[NL80211_ATTR_MESH_ID]),
+ &cfg);
+}
+
+static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+
+ return cfg80211_leave_mesh(rdev, dev);
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -4981,6 +5031,22 @@ static struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_JOIN_MESH,
+ .doit = nl80211_join_mesh,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_LEAVE_MESH,
+ .doit = nl80211_leave_mesh,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
--- wireless-testing.orig/net/wireless/core.c 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/wireless/core.c 2010-12-01 21:45:22.000000000 +0100
@@ -332,6 +332,7 @@ struct wiphy *wiphy_new(const struct cfg
WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
WARN_ON(ops->add_station && !ops->del_station);
WARN_ON(ops->add_mpath && !ops->del_mpath);
+ WARN_ON(ops->join_mesh && !ops->leave_mesh);
alloc_size = sizeof(*rdev) + sizeof_priv;
@@ -752,6 +753,9 @@ static int cfg80211_netdev_notifier_call
cfg80211_mlme_down(rdev, dev);
wdev_unlock(wdev);
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ cfg80211_leave_mesh(rdev, dev);
+ break;
default:
break;
}
@@ -775,20 +779,26 @@ static int cfg80211_netdev_notifier_call
}
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
-#ifdef CONFIG_CFG80211_WEXT
wdev_lock(wdev);
switch (wdev->iftype) {
+#ifdef CONFIG_CFG80211_WEXT
case NL80211_IFTYPE_ADHOC:
cfg80211_ibss_wext_join(rdev, wdev);
break;
case NL80211_IFTYPE_STATION:
cfg80211_mgd_wext_connect(rdev, wdev);
break;
+#endif
+ case NL80211_IFTYPE_MESH_POINT:
+ /* backward compat code ... */
+ if (wdev->ssid_len)
+ __cfg80211_join_mesh(rdev, dev, wdev->ssid,
+ wdev->ssid_len, NULL);
+ break;
default:
break;
}
wdev_unlock(wdev);
-#endif
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
--- wireless-testing.orig/net/mac80211/cfg.c 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/mac80211/cfg.c 2010-12-01 21:40:18.000000000 +0100
@@ -60,11 +60,6 @@ static int ieee80211_change_iface(struct
if (ret)
return ret;
- if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
- ieee80211_sdata_set_mesh_id(sdata,
- params->mesh_id_len,
- params->mesh_id);
-
if (type == NL80211_IFTYPE_AP_VLAN &&
params && params->use_4addr == 0)
rcu_assign_pointer(sdata->u.vlan.sta, NULL);
@@ -1054,6 +1049,30 @@ static int ieee80211_set_mesh_params(str
return 0;
}
+static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *mesh_id, size_t mesh_id_len,
+ const struct mesh_config *conf)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+ memcpy(&sdata->u.mesh.mshcfg, conf, sizeof(struct mesh_config));
+ ifmsh->mesh_id_len = mesh_id_len;
+ memcpy(ifmsh->mesh_id, mesh_id, mesh_id_len);
+
+ ieee80211_start_mesh(sdata);
+
+ return 0;
+}
+
+static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ ieee80211_stop_mesh(sdata);
+
+ return 0;
+}
#endif
static int ieee80211_change_bss(struct wiphy *wiphy,
@@ -1760,6 +1779,8 @@ struct cfg80211_ops mac80211_config_ops
.dump_mpath = ieee80211_dump_mpath,
.set_mesh_params = ieee80211_set_mesh_params,
.get_mesh_params = ieee80211_get_mesh_params,
+ .join_mesh = ieee80211_join_mesh,
+ .leave_mesh = ieee80211_leave_mesh,
#endif
.change_bss = ieee80211_change_bss,
.set_txq_params = ieee80211_set_txq_params,
--- wireless-testing.orig/net/mac80211/ieee80211_i.h 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/mac80211/ieee80211_i.h 2010-12-01 21:40:18.000000000 +0100
@@ -608,19 +608,6 @@ struct ieee80211_sub_if_data *vif_to_sda
return container_of(p, struct ieee80211_sub_if_data, vif);
}
-static inline void
-ieee80211_sdata_set_mesh_id(struct ieee80211_sub_if_data *sdata,
- u8 mesh_id_len, u8 *mesh_id)
-{
-#ifdef CONFIG_MAC80211_MESH
- struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
- ifmsh->mesh_id_len = mesh_id_len;
- memcpy(ifmsh->mesh_id, mesh_id, mesh_id_len);
-#else
- WARN_ON(1);
-#endif
-}
-
enum sdata_queue_type {
IEEE80211_SDATA_QUEUE_TYPE_FRAME = 0,
IEEE80211_SDATA_QUEUE_AGG_START = 1,
--- wireless-testing.orig/net/mac80211/iface.c 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/mac80211/iface.c 2010-12-01 21:40:18.000000000 +0100
@@ -268,9 +268,7 @@ static int ieee80211_do_open(struct net_
goto err_stop;
}
- if (ieee80211_vif_is_mesh(&sdata->vif)) {
- ieee80211_start_mesh(sdata);
- } else if (sdata->vif.type == NL80211_IFTYPE_AP) {
+ if (sdata->vif.type == NL80211_IFTYPE_AP) {
local->fif_pspoll++;
local->fif_probe_req++;
@@ -495,10 +493,6 @@ static void ieee80211_do_stop(struct iee
ieee80211_adjust_monitor_flags(sdata, -1);
ieee80211_configure_filter(local);
break;
- case NL80211_IFTYPE_MESH_POINT:
- if (ieee80211_vif_is_mesh(&sdata->vif))
- ieee80211_stop_mesh(sdata);
- /* fall through */
default:
flush_work(&sdata->work);
/*
@@ -1188,12 +1182,6 @@ int ieee80211_if_add(struct ieee80211_lo
if (ret)
goto fail;
- if (ieee80211_vif_is_mesh(&sdata->vif) &&
- params && params->mesh_id_len)
- ieee80211_sdata_set_mesh_id(sdata,
- params->mesh_id_len,
- params->mesh_id);
-
mutex_lock(&local->iflist_mtx);
list_add_tail_rcu(&sdata->list, &local->interfaces);
mutex_unlock(&local->iflist_mtx);
--- wireless-testing.orig/net/mac80211/mesh.c 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/mac80211/mesh.c 2010-12-01 21:40:18.000000000 +0100
@@ -674,26 +674,6 @@ void ieee80211_mesh_init_sdata(struct ie
ieee80211_mesh_housekeeping_timer,
(unsigned long) sdata);
- ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T;
- ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T;
- ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T;
- ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR;
- ifmsh->mshcfg.dot11MeshTTL = MESH_TTL;
- ifmsh->mshcfg.auto_open_plinks = true;
- ifmsh->mshcfg.dot11MeshMaxPeerLinks =
- MESH_MAX_ESTAB_PLINKS;
- ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout =
- MESH_PATH_TIMEOUT;
- ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval =
- MESH_PREQ_MIN_INT;
- ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime =
- MESH_DIAM_TRAVERSAL_TIME;
- ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries =
- MESH_MAX_PREQ_RETRIES;
- ifmsh->mshcfg.path_refresh_time =
- MESH_PATH_REFRESH_TIME;
- ifmsh->mshcfg.min_discovery_timeout =
- MESH_MIN_DISCOVERY_TIMEOUT;
ifmsh->accepting_plinks = true;
ifmsh->preq_id = 0;
ifmsh->sn = 0;
--- wireless-testing.orig/net/mac80211/mesh.h 2010-12-01 21:36:33.000000000 +0100
+++ wireless-testing/net/mac80211/mesh.h 2010-12-01 21:40:18.000000000 +0100
@@ -175,33 +175,10 @@ struct mesh_rmc {
*/
#define MESH_CFG_CMP_LEN (IEEE80211_MESH_CONFIG_LEN - 2)
-/* Default values, timeouts in ms */
-#define MESH_TTL 31
-#define MESH_MAX_RETR 3
-#define MESH_RET_T 100
-#define MESH_CONF_T 100
-#define MESH_HOLD_T 100
-
-#define MESH_PATH_TIMEOUT 5000
-/* Minimum interval between two consecutive PREQs originated by the same
- * interface
- */
-#define MESH_PREQ_MIN_INT 10
-#define MESH_DIAM_TRAVERSAL_TIME 50
-/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before
- * timing out. This way it will remain ACTIVE and no data frames will be
- * unnecesarily held in the pending queue.
- */
-#define MESH_PATH_REFRESH_TIME 1000
-#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units */
-#define MESH_MAX_PREQ_RETRIES 4
#define MESH_PATH_EXPIRE (600 * HZ)
-/* Default maximum number of established plinks per interface */
-#define MESH_MAX_ESTAB_PLINKS 32
-
/* Default maximum number of plinks per interface */
#define MESH_MAX_PLINKS 256
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
